hotel salzberg

Fallout 4 – V.A.N.S… What Does It Do? Why Would Anyone Want To Take/Use It? [Explanation with Example]

I saw someone ask this in the Official Steam Forum, wondering why someone would even pick the VANS Perk (the Skill to use it) while levelling. I wanted to come back here and post, as a Quick Tip perhaps, a short explanation on what V.A.N.S. actually does (and how it can be helpful to players).

Briefly summarized, V.A.N.S. is a Perk of Intelligence (requiring only 1 INT to Unlock) that lets the V.A.T.S. interface ‘show you the way’ to your marked objective/quest/mission location. An example I recorded of how it looks, is below:

Recorded aboard The Prydwen, this is a short example of how VANS looks in Fallout 4.
(Reduced size, framerate and quality, to fit Upload requirements at Steam)
Click to see slightly larger Full Size
On Steam, at http://steamcommunity.com/sharedfiles/filedetails/?id=966498722

To use V.A.N.S., simply hold the Hotkey for opening VATS for a short time (eg. on PC, instead of hitting ‘Q’ quickly once, to enter V.A.T.S., hold it down) – let go of the ‘Q’ key, after about two full seconds or so – even if the Pip-Boy has not fully opened yet. Then hit ‘TAB’ to close the Pip-Boy right away, once the ‘green trail’ is seen.
You do not need to move or turn at all, until after closing the Pip-Boy fully (for example, I do not use the mouse at all to use V.A.N.S., on PC, I just open the Pip-Boy with ‘Q’ and close the Pip-Boy with ‘TAB’).
[Perhaps this will help those having issues with opening/closing/viewing the ‘trail’…]

If you’ve played Skyrim, it is similar to the Clairvoyance Spell in that game, as it will then illuminate a ‘trail’ that looks like a tube of smoke along the ground, that you can follow (but in Fallout 4 it is ‘Pip-Boy Green’, as opposed to ‘SKYrim Blue’).

While this doesn’t seem needed as Fallout 4 has both Map Marks (on the Map in the Pip-Boy and at the bottom of the Screen in a Compass) and Floating Markers (that can be seen on Doors, above NPCs, etc). V.A.N.S. is helpful in a slightly different way. It shows you the ‘Main Path to take’ to get to your Marked Objective/Quest/Mission (as in, “go to this Street and use this Road”).

For example, if you are jumping around in the back hills or lost in the skyscrapers of Downtown, it will guide you out of where you are with the ‘green steam trail’ and show you how to get back to the main roads, then it will illuminate which way to go from there, too.

The Map Markers that are normally available only show the ‘overall’ or ‘general’ Heading, like a Compass (N, E, W, S) and not ‘how to go around this thing in front of you’ or ‘how to get back to the main road first’. Those last concepts are where the usefulness in V.A.N.S. shines; in how it can guide you from exactly where you are, first around whatever is in front of you (to the nearest main path), then how to go on from there to your next objective.

Try it out on your next Character perhaps – and have fun in Fallout 4!

Men’s Body Click Diet part 3

What happened with my patient Brooks shows how this scenario plays out. It also reveals why I think that such mysterious and sometimes chronic inflammations of the prostate are usually not infections but instead have a lot to do with factors that are also related to abnormal growth or cancers of the prostate.

Brooks is a 50-year-old businessman whose previously dependable penis had become much less reliable with regard to its sexual responsibilities. At the same time he suffered from discomfort with urination, some hesitancy in starting his urinary stream and the need to get up at night to urinate more than once, which had been his previous custom. He was alarmed that whatever was going on represented some sort of permanent equipment failure. Told at first by both a general practitioner and a urologist that his prostate was ‘pretty normal’ and later that it was a ‘little enlarged’, he had undergone two courses of antibiotic treatment for nonspecific prostatitis. His symptoms improved while he was on the antibiotics but returned when he finished the medication.

I had a telephone consultation with him and after hearing him out and considering various possibilities, I suggested to him that he had ‘some kind of mischief’ with his prostate. This was a much softer diagnosis than that of nonspecific prostatitis. But it suggested a treatment that was aimed more at making his prostate happy than at trying to kill some unseen, unidentified and perhaps nonexistent germs.

Diet Start

The concept of trying to make some organ in your body happy seem, alien to a regular guy like Brooks. He shares with most people the medical notion that there is a specific treatment for every condition and that this treatment is not a strategy to make some part of your body happy. It did, however, make Brooks happy when I suggested that part of his therapy was at least daily efforts to encourage the emptying of his prostate and its tubing by provoking an ejaculation. This was contrary to the no-sex advice he had been given earlier, which seemed to me like the equivalent of telling someone with a bad cold not to blow his nose.

I offered Brooks a package of additional measures to make his prostate happy. These included daily doses of soy protein, flaxseed powder, flaxseed oil, zinc and an antifungal medicine. If you understand why I loaded my shotgun with such a diversity of remedies and how they all fit together, you will also see how I perceive that the whole range of prostate mischief from inflammation to cancer fits together.

I’ve already explained the soy protein and flaxseed powder. I also recommended an additional supplement of flaxseed oil. The prostate gland is one of the richest sources of the hormonelike substances that are made from omega-3 fatty acids, with which flaxseed oil is loaded. They are called prostaglandins, named for the very organ under discussion, because they were first isolated from fluids found in the prostate. (Soon after their discovery in prostatic fluids, they were found to be present in a wide variety of animal tissues of all kinds and not at all exclusive to the prostate, but the name stuck.) The use of fatty acids in flaxseed oil helps the prostate make prostaglandins. But the more important motive for a prescription of flaxseed oil was the strong likelihood that Brooks, like most people, was deficient in omega-3 oils. The flaxseed oil, then, was generally beneficial rather than a treatment aimed specifically at the prostate.

I recommended that Brooks take zinc because it helps the immune system fight off infections and control the body’s inflammatory response to infection. Finally, I prescribed the antifungal medicine because of my consistent experience with other patients where I’d seen that an overgrowth of fungus germs, particularly yeasts, has a proclivity to bother people’s reproductive systems. I have often found stubborn cases of prostate problems in men to be responsive to antifungal drugs.

But there’s another, more important angle to the antifungal treatment Igave Brooks and the many other men I’ve treated in a similar way. In order for the isoflavones and lignans in soy protein and flaxseed powder to be transformed into the substances that beneficially modulate hormone chemistry, they must pass through the digestive tract, where they are changed by certain germs that live there. If the normal distribution of healthy flora has been disturbed so that there are too many bad germs and not enough good germs, the capacity of the intestinal flora to help hormone chemistry will be seriously impaired. Antibiotics are by far the most significant disrupter of intestinal germ populations. A single course of an antibiotic prescription can affect this balance for months or longer. My prescription of an antifungal medicine for Brooks was aimed at two overlapping targets. One was the possibility that a fungal infection was directly related to the prostate inflammation; the other was that his two courses of antibiotics had made him worse by causing a disturbance in his bowel germ population that would correct itself once the number of yeast germs living there was reduced.

Within ten days Brooks and his prostate were both happy. His equipment returned to reliable functioning and he has remained well since. He is as pleased as he is surprised. This is true for many men whose similar responses to simple changes in diet don’t jibe with their expectation that I would have to treat them by calling out the big guns rather than coaxing their bodies back into balance. I’m confident that the remedies I suggested for Brooks worked because they were specifically connected to achieving a hormonal balance governed by a combination of factors related to his digestive flora and an intake of substances that made his prostate happy.

It’s not a big step from consideration of acute problems, such as what Brooks had, to the more chronic problems of prostate enlargement andprostate cancer.

How to Overcome a Negative Habit



Habits are powerful.  Unfortunately, they often are created outside our consciousness and without our permission. However, we can consciously change habits. Habits shape our lives far more than we realize— they are so strong, in fact, that they can cause our brains to cling to them at the exclusion of all else, including common sense.
At the same time, positive habits can change our lives for the better. So how are habits created and what can we do to influence them in ourselves and our clients?
Three Parts of a Habit
The Cue: a situational trigger that is based on a reward you are seeking.
The Routine:  a physical or emotional action you take to obtain the reward.
The Reward:  the satisfaction you get by following the habit.

The Steps to Changing a Habit
Identify the Routine:  You must identify how you go from a particular cue to the routine of the habit and the reward it gives you.
Understand Cravings and Rewards

The first part of a habit is the cue, but before the cue there is some type of craving.  Cravings drive habits.   Understanding cravings is key to figuring out habits.  In a habit, there is a specific reward that satisfies a particular craving.    In other words, figure out what you are getting from the habit because you ARE getting something from it!
Rewards are powerful because they satisfy cravings. But we’re often not conscious of the cravings that drive our behaviors. For example, when developing the air freshening product Febreze marketers discovered that people craved a fresh scent at the end of a cleaning ritual.  They found a craving that people were not aware of.     This craving is so strong that without added scent most people do not get satisfaction from an air freshener that just removes odors from the air – they have to smell the scent!   It is exactly the same phenomenon with breath freshners which can be made to eliminate odor WITHOUT any taste/scent, but no one buys them!
Most cravings are like this: obvious in hindsight, but difficult to discern when they are in control of your behavior. It is critical to discover the cravings that drive habits to be able to change or create habits!   To figure out which cravings are driving particular habits, it’s useful to experiment with different rewards. For example, say your reward is having a cookie after studying every night.  The next time you study deliberately substitute something else for the cookie such as going for a short walk or having a cup of tea instead. 
The next time eat an apple and another time change call a friend for call, etc. What you choose to do instead of eating a cookie is not important.  The key is to test different hypotheses to determine the exact craving that is driving your routine.   Are you craving the cookie itself, or a break from work? If it’s the cookie, is it because you’re hungry? (In which case the apple should work just as well.) Or is it because you want the burst of energy the cookie provides? (And so coffee may work just as well.) Or is it where you eat the cookie and who you are with?  Do you go to a specific place to get and eat your cookie?  If so maybe the real craving may have to do with a desire to socialize.  
As you test four or five different rewards, use this technique to identify patterns.  After each activity, note the first three things that come to mind after your reward behavior. This can be emotions, random thoughts, reflections on how you’re feeling, or just the first three words that pop into your head. Then, set an alarm on your watch or computer for fifteen minutes. When it goes off, ask yourself: Do you still feel the urge for that cookie? The reason why it’s important to write down three things— even if they are meaningless words— is twofold. First, it forces a momentary awareness of what you are thinking or feeling.
By experimenting with different rewards, you can isolate what you are actually craving, which is essential in changing a habit.
Determine the Specific Cue for the Habit

This is the trigger that initiates the craving for the reward.   So it is very important to learn the cues for habits.   Common cues including being in a particular place, being with a particular person, a particular time of time of day, a specific emotional state, etc.    Asking yourself these five questions can be very helpful for identifying cues:
Where are you when the urge for a reward hits you?
What time is it?
What is your emotional state?
Who else is present?
What did you do right before you had the urge?
Have a Plan!
Once you understand the habit you want to change you need to create a plan to change the habit!   The easiest way to do that is have a specific plan of action whenever you experience the cue or cues.    For example, if you smoke when you have coffee know this and plan to do something else deliberately whenever you have a cup of coffee.   The plan is key or you will slip right back into the old routine.
Another example is having a few beers every night when you get home.  Through the first three steps you discover that having the beer helps you relax after a stressful day.    You also learned that going for a 20-minute walk or doing Tai Chi gives you that same reward of feeling relaxed.   So now you plan to either go for a walk or do Tai Chi ever day as soon as you get home (or even better before you get home!).

The weight question

‘Those desiring to lose weight should perform hard work before food. They should take their meals after exertion and while still panting from fatigue … They should, moreover, eat only once a day and take no baths and sleep on a hard bed and walk naked as long as possible.’

Theories on the weight-loss benefits of walking around naked and not bathing have not been proven, but Hippocrates’ other dietary advice isn’t completely off the wall and shows that even 2,400 years ago, the relationship between food intake and energy expenditure was recognized.

Diet Start

Today ‘obesity’ is becoming universally recognized as a disease in its own right. Obese and overweight are terms that are often used interchangeably, but let’s clarify the difference between them:

¨ Overweight refers to an excess of body weight and includes all tissues, such as fat, bone and muscle, but not just excess body fat.

¨ Obese means that someone is carrying an excessively high proportion of body fat that could compromise their health.

If you are an athlete or body-builder, you may weigh more than the desirable weight range for your height, but this is normal because muscle weighs more than fat. Equally, you may be a relatively sedentary person who weighs in at the correct weight for your height, but who still carries too high a proportion of body fat. In this case, a good exercise programme is vital.

For those of you who feel that you are more ‘lard’ than ‘hard’, and don’t like what you are seeing on the scales, a better way of calculating just how overweight you are is by working out your Body Mass Index (BMI).

You can tell if you have surplus body fat simply by seeing if you can pinch more than 2.5cm (1 in) on your hips, tummy, underarms and back.

Alternatively, get your doctor or gym instructor to check out your BMI using callipers, or buy a set yourself from your local pharmacy. If you have more than 25 per cent body fat, then the chances are that you are carrying too much weight, or at the very least need to change your diet and participate in exercise that will burn fat and build muscle.

Successful weight loss and healthy weight management depend on sensible goals and expectations – losing just 5-10 per cent of your weight is the kind of goal that can help improve your health.

You may be wondering how you have got this far without hearing about calories. But you don’t need to become obsessed with the calorific value of everything you put in your mouth. Instead, it is much better to check food labels to see if the food contains unnecessary additives, sugar, hydrogenated fats and salt – and, of course, how high the carbohydrate content is.

MODERN RESIDENCE LAKE HOUSE DESIGN BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA LAKE VIEW

See all of its 340 square meters, the lake house designed by David Guerra Architecture located in Minas Gerais, Brazil. The very steep terrain, as the permit was built by architect has the opportunity to build a box-shaped structure with overhanging balconies. Residents are a mother and her adult son, so the house must meet their need for privacy and comfort, and entertainment. The landscape box provided by an excellent situation increases the value, while the collection is very personal spaces. Benefits son of a bedroom with a separate entrance, located on the ground floor, next to the playroom. Gourmet kitchen is also located on the lower floor where there are also two additional bedrooms and a service area. Balcony and terrace make the connection to fresh air and beautiful scenery. The first floor features a garage, laundry room, living room and dining room, balcony, a guest room and master bedroom.

This is a nice place to live, providing a platform for entertainment and relaxation for its residents and their guests, do not you think?

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA CENTER ROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA SROP

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

EFFICIENT RESIDENCE LAKE HOUSE BY DAVID GUERRA BEDROOM

Quick Tip: Guild Wars 2 – How To Split Stacks Of Items

Just a quick tip for GW2 and those of us who were tying to split stacks of things, only to link them into Chat and ‘shout’ the item’s link to people around us, the entire Map, etc. The way to actually sort things in a more private manner, is to hold down the ALT key and then drag the stack of items to an open slot. A dialog box should come up asking you how you want to split the stack of items (as seen in the example below):

Pressing the Shift key, as most know, will link the item in the chat box, and pressing Control, will link it and shout it out in Chat automagically – which is nice and embarrassing. I’ve seen some random linkages in the Chat Box [of things that aren’t of any interest] so I know it isn’t just me! I hope that this helps someone out and saves them from this atrocious “Faux Pas”…

See You In The Games!

Managing the Work/Rest Ratio in HIIT Training

High Intensity Interval Training aka HIIT training is all the rage and there are many different HIIT training protocols available, but to produce the best results it is important to understand how to manipulate the Work/Rest Ratio.    The Work/Rest Ratio is the ratio of time spent working in the high intensity interval to the time spent in the recovery interval and there is no one ideal Work/Rest Ratio. In fact there are three distinct methods you can use to design interval training programs based on how you manipulate the Work/Rest Ratio.
Fixed Work, Fixed Recovery
This is the most common method and often used for group training because it keeps everyone working together.   In this method the amount of time spent in the work phase is fixed as is the amount of time in the recovery phase.   For example the ever popular “Tabata” Protocol is a fixed work, fixed recovery protocol using 20 seconds of work and 10 seconds of recovery done 8 times.    Another example is the Sprint 8 protocol which uses 30 seconds of work and 90 seconds of recovery.  In addition, all MX4 programming uses this method either for a 60/30 work/rest ratio or a 4 to 1 Minute Work to Rest Ratio during Density Workouts.
Needless to say there are endless variations of fixed work, fixed recovery interval protocols and each one feels different and allows for a different level of relative intensity.    The advantage of these type of protocols is that they are very simple to design and very easy to track using a simple timer, and if using heart rate monitoring you can adjust the actual work intensity and recovery intensity based on individual heart rate response.   Also this is a very easy way for a trainer to manage a group as mentioned previously.
Fixed Work, Variable Recovery
In this method the amount of time spent working is fixed, but recovery time varies based on heart rate response.  This method is a more individualized way to do HIIT training where each work interval begins after the heart rate slows to a predetermined point correlated with a specific level of individual recovery.  The advantage of this method is it can be customized to each person based on their goal, age and current fitness level.   An example would be doing a 1 minute work interval with a fit 20 year old and setting the recovery threshold at say 120 beats per minute (a relatively low exercise heart rate for a fit 20 year old).  So he would work as hard as he can for 1 minute then go into recovery and stay in recovery until his heart rate slows to 120 beats per minute.
Variable Work, Variable Recovery
This method varies work time AND recovery time based on preset work heart rates and recovery heart rates.   For example using the same example of a fit 20 year old you might set a goal work heart rate threshold at 180 beats per minute – meaning that you keep him working hard until his heart rate hits this work threshold and then immediately begin recovery.    Then you would keep him at a reduced work rate until he hit a predetermined recovery heart rate threshold such as 120 beats per minute.    This is a highly sophisticated and highly individualized way of exercising with precise management of work and rest customized to the individual.
Have some fun and experiment with each of these to prevent plateaus in your workout progress!

Franchisee Profile: Marc Flame

Franchisee Profile: Marc Flame

Marc Flame is originally from the Bronx in New York, specifically Riverdale. Growing up, Marc spent every summer on Long Island at his grandmother’s beach house and loves the outdoors. After graduating from JFK Highschool, Marc’s parents moved to South America where Marc learned to speak basic Portuguese. After living in Brazil for a while, Marc moved back to New York where he attended New York University. He graduated in 1981 with a degree in Economics and International Business. Upon graduation, Marc spent much of his time on Wall Street starting his career Bankers Trust Company. Marc eventually became Chief Financial Officer at the banks Technology subsidiary. During Marcs’ tenure he established a successful record of improving operational efficiency and profitability. After fourteen years at BTCo, Marc left and joined Citigroup. Marc spent ten years within the Finance Organization of Citigroup. He then joined the CBS Corporation where he served as CFO of the CBS Technology organization.

After doing some traveling, Marc decided to relocate from Chicago to Atlanta where he began researching franchises to invest in. After much research Marc decided that Workout Anytime was where he wanted to be. Not even three weeks after watching the Workout Anytime franchise video, Marc signed for his first franchise. He now owns the first Workout Anytime located on the South side of Atlanta.
How did you learn about the brand? 
I was researching different franchises and was heavily focused on the fast-food industry when I came across Workout Anytime. I watched the franchise video and was immediately hooked. I knew right then that was what I wanted to invest in. Not even three weeks after seeing the video I met with Randy the entire senior WOAT team. It felt like a family and I signed with Workout Anytime after that meeting.
Why did you choose an opportunity with Workout Anytime? 
I’ve always wanted to own my own business. I worked at a Baskin Robbins in high school and it was some of the best times I’ve ever had. I have always enjoyed doing my own thing which is why I started looking into franchises. I chose Workout Anytime because I am very interested in the Workout Anytime model and I really wanted to do a franchise in a market that really needed it. 
Do you have any development/extension plans? Add units? Timeframe? 
I would like to eventually expand. I do not have a multi-unit sign at the moment, but the goal is to have 3-4 locations within 4-5 years. I am trying to open one every year and a half. Currently, I am working to be the most successful location rather than building out more units. When you talk about franchises people have glass ceiling expectations with what you can achieve with any one location. The Workout Anytime model allows me to push the boundaries, and ensure the opportunity for many members to enjoy all the advantages provided to Workout Anytime members.
Are you involved in any charities or involved in the community in any way? 
I am learning more about the Riverdale area each day and would love to work with charities and get involved with the community once I get to know it better.
Do you have any other interesting hobbies or passions?
I love spending time outdoors. Anything outdoors such as going to the horse stables with my daughter, 
watch my son dirt bike on the trails, and go to the beach as often as possible.

Quick Tip: Fallout 4 – TAB Key Stopped Working And Not Bringing Up The Pip-Boy? Here’s A Possible Fix [Text-Only]

I have been having a ton of fun playing Fallout 4 lately [again, building up my Settlements too much and ignoring the Main Storyline!] and ran into a ‘small-but-game-stopping‘ issue where the TAB key appeared to stop working. “Hitting TAB wasn’t bringing up the Pip-Boy anymore..??”

After doing some Troubleshooting and paying attention to what I was doing and pressing… it turned out to be a very simple issue – the TAB key was ‘locked’ out because of how I had used it in the Console.. Let me explain briefly:

I was playing around with SweetFX in ReShade off and on again, mainly to take Screenshots as I had lost a ton during a recent Hard Drive failure [as in thousands.. I know… but I don’t usually back up screenshots or recordings].
To open the Settings/Configuration for ReShade, the hotkey combination is SHIFT+F2.

Unfortunately, something in this combination of Fallout/ReShade/Windows ‘locks out’ the Shift Key after doing this with the Console open in FO4, and when hitting Tilde again to close the Console, this leaves TAB ‘disabled’ and it no longer brings up the Pip-Boy.

[This can also happen with the ENB series of utilities, which use SHIFT+ENTER to open and close the interface]

The Fix for this was simple, once I figured it out: hit Tilde again to open up the Command Console, then hit SHIFT once, then hit Tilde again to close the Command Console. That’s all there is to it!

Now the TAB key worked and I could bring up the all-important-and-totally-cool Pip-Boy once again! This is just a Quick Tip in Text-Mode only then; but I wanted to get it typed up and posted so that it could start to help out others that have run into this little problem [that seems to occur especially if running ReShade or ENB, in Fallout 4]. HTH

The Game Tips And More Blog’s Ludo Ludi (Game Play) #1-3

I wanted to start a video series that was Random Gameplay Video Clips that I have collected over time. I started out calling it FLASHBACK, creating a logo for it and everything; but I wanted a way to archive/share them out a little bit faster/easier, rather than ‘Featuring’ them every time, so I came up with the concept of “Ludo Ludi”.

It means “game” and “play” in Esperanto. The idea was to not label the gameplay clips or state what they are, in order to have other people enjoy the “surprise reminiscence” of the games. Viewers could try to guess what they are for fun or just enjoy them as part of a playlist where they didn’t know what was coming next. For the most part it would be easy to guess them of course; if you played the game, you’ll know what game it is and what class I played, etc.etc. But, I still thought it would be entertaining to have a bunch on a playlist of some sort, with no obvious names, having a transitory video (without logos/intros) of something loopable such as static – as though changing the channel on a television – in-between videos. With Youtube’s Playlist and Randomize features, this can now be done and one can sit and reminisce on games of yesteryear with my video clips showing snippets of gaming moments recorded from a wide variety of games! Everyone with ADD/ADHD can just click the Next button on the playlist to skip to the next one if the current one isn’t holding their interest! Everyone is a winner! With this in mind then, I now present one long paragraph and the first three installments of :

The Game Tips And More Blog’s New Gameplay Video Series, “Ludo Ludi (Game Play)”





Enjoy and See You In The Games!

Why you will lose false fat

Donna didn’t look fat, at least not in the leggings and long sweater she was wearing as she entered my office. Her legs looked slender and fit, and her sweater hid the rest. But she felt fat.

`I’ve got a guy’s type of weight problem,’ she said as she sat down. She was animated and energetic, but obviously frustrated. ‘Women are supposed to collect fat in their hips and thighs — aren’t they? — but mine sticks right here.’ She patted her stomach. When she was sitting, I could see that it bulged, even under the thick sweater. ‘I hardly ever overeat,’ she said, `but since I’ve hit 40, I get no forgiveness from my body. It’s like my metabolism took early retirement. I take two bites and I can feel the fat cells around my waist start to expand. Literally. I pinch my love handles, and they’re thicker before I even get up from the table.’ She looked at me expectantly, as if I might not believe her. ‘My last doctor,’ she said with a sour look, ‘told me there’s no way that food could make me fat that fast. But I can feel it happening.’ Again, she searched my face for reassurance. She had an upbeat personality, but she was almost ready to give up. She ate carefully, exercised hard, and still carried 20 extra pounds.

Diet Start

`It’s not your imagination,’ I said. ‘That feeling of instant weight gain happens to a lot of people. But it’s not fat you’re gaining. It’s fluid retention and bloating, and you’re probably getting it from food reactions. A lot of the swelling and bloating from food reactions occurs directly in and around the gut.

That’s why you feel it in your midsection right away.’

`If it’s not fat,’ she said, ‘why doesn’t it leave as fast as it comes? I look like this almost all the time.’

`Your biochemistry won’t allow it to go away, because your body is trying to protect you. When you eat reactive foods, your body sees them as foreign substances, almost as poisons, and it goes all out to protect you. It can take two to three days to stop reacting to some foods.’

Tut it’s not like I eat junk. I’m an old-time you-are-what you-eat type. I was eating granola before they even had a name for it.’ She smiled, but I could see she felt cheated. For many years, she’d followed all the rules — but the rules had been wrong.

`People can become reactive to healthy foods,’ I said, ‘even granola, if you eat it all the time. Do you eat a lot of non-fat and artificially sweetened foods?’

`Now that my metabolism has slowed down, I’ve got to.’

`I hate to say it, but some of those “lite” foods may be doing you more harm than good. If you’re reactive to a food, it can be virtually calorie-free and still make you gain weight. Even diet soda can cause bloating and swelling.’ She looked surprised. Most people these days are so accustomed to counting calories and fat grams — the quantity of their food — that they forget about the importance of quality.

`I don’t think you’re eating too many calories,’ I said. ‘And I don’t think your age is the real problem. Your metabolism is slowing down just 5 per cent every decade, and that’s not enough to cause what you’re experiencing. I think you’ve just developed some food reactions over a long period of time. When you resolve them, you’ll lost your weight.’

Tut I was tested for allergies and they didn’t find any.’ `Did they explain that not all food reactions are allergies?’ I asked.

`No.’

I wasn’t surprised. Most doctors don’t really understand food reactions. They usually have an all-or-nothing attitude; they think that you either have a classic food allergy, with hives and wheezing, or you have nothing at all.

I gave Donna a brief rundown on how food reactions work and how they cause bloating and swelling. I explained it out of respect for her. Some doctors think it’s acceptable to tell patients what to do, without telling them why, but I object to that approach. If patients are willing to change their lives by taking my advice, they deserve to know exactly why these changes will help.

As I gave all the details to Donna, she listened attentively and took notes. Over the next few weeks, she eliminated her false fat foods — one of which was oats, a primary ingredient in most granola — and dropped about 15 pounds.

Now I’ll give you the details on how food reactions get started. Then we’ll look at how they cause bloating and swelling.

If you’re going to make changes in your life, you deserve to know exactly what’s going on.

I’m sure some of this information will hit home. Often, when I tell patients about food reactions, they say, ‘That’s me you’re describing.’

MODERN ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Here is a mesmerizing seeks two-bedroom apartment with contemporary charm of events celebrating the beautiful Scandinavian style. The trough has two bedrooms and a kitchen year covers an area of ​​74 square meters. According Alvhem open plan living, social nucleus in apartments with high ceilings, walls painted in immaculate white, the beautiful oak floors and large windows. Splashes of color brighten the interior and seats with the elements that seem inviting visitors screaming. The kitchen island of brass with a thick sandstone table creates a social atmosphere that is sure to make any cook happy. The table has a sink sub-pasted from Blanco, who is both stylish and practical. From the terrace one has a spectacular view of the beautiful area and a perfect place for relaxation. What an inspiring use of space for a modern two-bedroom apartment!

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

MODERN TWO-ROOM DESIGN APARTMENT IN THE HEART OF STOCKHOLM

Choose Your Poisons

Food additives vary tremendously in character, from diethylstilbestrol (DES), a synthetic female hormone used to stimulate cattle growth by 15 percent and boost efficiency of feed by 12 percent, to butylated hydroxyanisole (BHA), an antioxidant used to retard or prevent rancidity and flavor deterioration. Then there is glycerol monostearate, an emulsifying agent derived from partial decomposition of fats, which is used in making ice cream, and a wide variety of artificial coloring compounds (there are now thirty-three permitted in Britain, only nineteen in the EEC, ten in the U.S., and four in the U.S.S.R.). Much of our animal food is laced with antibiotics, which are given to retard meat spoilage. They are also used to suppress evidence of disease in animals that are raised in adverse circumstances and are, therefore, prone to illness. They offer no nutritional benefits.

There are three main ways that food additives can be threats to health: they can be carcinogenic (tending to produce cancer), teratogenic (tending to harm the unborn child in the womb), and mutagenic (tending to produce changes in the gene pattern which can be passed on to future generations). One can add the danger of producing genetic changes in the cell material which promote early aging in the body—of particular concern to a woman intent on preserving her youthfulness and good looks.

Diet Start

Government agencies try to regulate the safety of additives in fabricated foods, but judging from the Canadian and American records of failure and the number of permitted additives that have in recent years been suddenly whisked off the market, this is an impossible task. Only 60 percent of the additives used in Britain have been tested at all and even then only for acute toxicity—that is, to determine whether or not they bring immediate adverse reactions to an organism ingesting them—not for teratogenicity nor for possible genetic effects. In fact, there is simply no way for them to be tested. The tests that are done are carried out on animals, not humans, and as the thalidomide tragedy showed, a substance can appear quite safe from teratogenic effects in laboratory animals, yet result in tragic consequences for a human fetus.

But even our methods of testing are outdated. According to Ross Flume Hall, this is because we have all our assumptions wrong. “Both the standards of nutrition by which these foods are judged and the methods of toxicology used to determine their safety are outmoded nineteenth- century models,” he says. Nineteenth-century nutritional theory is based on the notion that all we need from food is protein, carbohydrates, fat, vitamins, and minerals regardless of their source. It is unaware of the interrelationships in natural foods, and of the implications of possible nutrients as yet undiscovered (as with fiber until fifteen years ago) which may be vital for good health. “This limited concept of what constitutes nourishment persists,” says Hall, “even though it has been completely outmoded by the enormous advances in understanding of cell and molecular biology.”

The nineteenth-century toxicology still practiced today assumes that each chemical tested has its own level of toxicity. As long as one’s consumption of that chemical remains below that level, it says, one is safe. It gives no consideration to how different chemicals, tested separately, affect an organism when they are consumed together; nor is any thought given to the cumulative effects of taking a substance regularly over the years.

“What we are beginning to realize,” says Hall, “is that not only can chemicals poison in the short term, they can also cause long-term subtle and undetected changes in personal biology. These changes can show themselves in devastating ways such as cancer and other degenerative diseases and birth defects.”

Food additives are not the only problems with convenience foods either. Their simple nutritional worth is highly questionable. For in addition to their lack of fiber (natural fiber is largely removed in the manufacture of convenience foods), government surveys in Canada and the United States—where 80 percent of food eaten is now factory-produced —show that in spite of the great wealth of these countries and the availability to the public of a vast variety of foods, in general people are not getting enough vitamins and minerals in their diet. This is in large part because so many of the nutrients are lost in processing.

Researchers at Rutgers University experimented with frozen chicken pies to see what vitamin loss, if any, had taken place in the processing. They chose vitamin C levels. To their amazement, researchers found no vitamin C whatever in commercially prepared frozen pies. Then they added vitamin C to the pies and refroze them. When they were reheated two days later, three quarters of the vitamin had disappeared.

A random sampling of 6.5 million elderly people in Britain, in an investigation sponsored by the Ministry of Health, revealed that four out of five were suffering from vitamin deficiencies—a factor that is probably responsible for a large number of illnesses, including many mental disorders suffered by the elderly. According to Dr. Geoffrey Taylor, who has made a long study of the problem in Britain, “There is every reason to believe these deficiencies are present in other age groups of the population as well.”

These are a few of the reasons why the Lifestyle Diet does not include convenience foods. For lasting health and beauty you need the very best complement of nutrients you can get. The McCarrison Society, an organization of doctors and dentists in Britain dedicated to the study of the relationship between nutrition and health, issued a directive that expresses it very well: “Food should be left as close as possible to its natural state. It should be grown on healthy soil. Stored, canned, packaged or precooked food should, whenever possible, be replaced by fresh food. The protective value of a wide range of fresh vegetables, fruits, and low-fat dairy produce is particularly important. Cereal carbohydrates should not be refined and sugar consumption should be at an absolute minimum.” These are the basic principles of the Lifestyle Diet. Now let’s see how to put it all into practice.

Quick Tip: Medieval II Total War – ‘Fatal Graphics Error’ [Possible Fix]

I first bought this great game as a DVD Retail Box and then later on purchased it through Direct2Drive [when Direct2Drive was around, then that service became GameFly (2015 Edit: and now it’s D2D again)]. I also have it on Steam as a backup digital download source – it’s too hard to resist those really cheap Steam Sales! Recently, I was Re-Installing M2TW, to begin conquering the world once again… However, I was surprised to see nothing but an error message (on Windows7):

The “Fatal Graphics Error” message, when starting MTW2

I personally found this error humorous, as it complained about Graphic Settings – and I couldn’t even start/get into the game to change or even set them in the first place! So, I started Troubleshooting….

Apparently, a lot of people, on many forums, have been getting and asking about this error – and still are – so here is a great chance to share this Quick Tip on a simple ‘fix’ for it I eventually found, simply by playing with the Shortcut Properties:

Right-Clicking on the Shortcut for the game and editing the Compatibility Tab to match these settings,
is how I fixed the Fatal Graphics Error problem when I played M2TW recently. Try it out!
Click image to see Full Size

After making these changes to the Shortcut that runs the game (adding two quick checkmarks in the checkboxes shown above), after launching it should show a black screen [detecting settings?] momentarily and then load up the game properly (you may have to click on the icon in the Taskbar [Windows] to bring it up a second time) but that’s it!
Hopefully that works for you all, as it did for me.

See You In The Games!

Planetside 2 – Video Tutorial: How To Attack and Defend a Facility – Bio Lab (Subtitled) [Short Version]

In this brief Tutorial focused on New Players to Planetside 2, I present concepts to attacking and defending a large facility with multiple objectives, such as:

  • capture points
  • shields
  • generators
  • spawn rooms
  • terminals
and more…
In the video below, I am playing on the New Conglomerate FACTION. I CAPITALIZE full words that are either important structures and names to remember, or are important concepts to learn for battle.
During this battle at a large base, I show briefly how to use your HUD (Head Up Display) to locate OBJECTIVES, what some icons on the screen represent, where major structures are and important areas and aspects of the base.

Although my FACTION successfully takes over a Bio Lab, many of the concepts presented in the tutorial will carry over to battles at other large facilities, such as Amplifier Stations and Technological Plants.
[A separate tutorial for an Amp Station can be seen here:
http://gametipsandmore.blogspot.ca/2012/12/planetside-2-video-tutorial-how-to.html]

With subtitles over sections of a Bio Lab battle, playing as the NC (New Conglomerate), I go over some concepts a few times to make sure they set in for New Recruits, but for the most part, I stick to the main objectives of the base and how to quickly locate them, as well as the various ways to get inside..
Enjoy and See You In the Game!

Blog Hunting

Today I was hoping to link up with Laura Candler’s Corkboard Connections Blog Hunt, but it seems that linky closed already [sadface].  Still, I want to share a little about what I’m using as my Google Reader alternative and why.


In my mind, this is a battle between BlogLovin’ and Feedly.

BlogLovin’

I’ll confess that I didn’t move over to this platform initially. As soon as I caught wind a few months ago that Google Reader was dying, I quickly packed up and moved over to Feedly. With all of the recent push in the teacher-blogger community toward BlogLovin’, however, I decided to give it another try.
What I like
As a blogger, there are a few features that I really like about BlogLovin’. 
1. Notifications and Blog Finding
I like that I can get notifications when new people start following me. I also like that when I click on those notifications, I can see what other blogs people are reading. I’ve stumbled upon some great new-to-me blogs that way over the past few days. 
2. Viewing actual blogs
Rather than seeing a stripped down version of someone’s blog, I can see the actual website in a BlogLovin frame. This allows for easy commenting when I want to leave comments. It also lets me see how cute everyone’s blog is these days.
What I dislike
1. Too many clicks
It seems like it takes forever to navigate sometimes, and I’m constantly clicking to mark things read, jump between blogs, and if I actually leave a comment on a blog, I lose my place in BlogLovin and have to start over with the remaining unread blogs. I subscribe to hundreds of blogs, so I have to be efficient when I’m looking at content. 
2. It’s still buggy
I tried to go back and organize the blogs that I read into categories the other night, and I found that BlogLovin wasn’t saving my organizational changes for blogs unless I categorized them as soon as I started following them. That was annoying. I also noticed that some blogs that I’m certain I was already following were showing up as unfollowed. Others were showing up multiple times in my reading list. I suspect that a lot of these bugs will improve — I saw iPad updates for the app yesterday, so I know they’re working on it, but I wish a lot of these features were already working better.

Feedly

Since I’ve been using this for a few months already, I’ll openly confess that I’m a bit biased. It may also be the case that I’ve got this platform more figured out than BlogLovin, and some of the “advantages” of Feedly may exist in BlogLovin, too. But here’s what I’ve found…
What I like
1. Better app integration
There are several different apps that I like to use when I’m reading blogs (and in this case, I’m talking about web-based apps, not iPad apps).
Pinterest – Feedly has Pinterest integration built in, so I can hover over an image and pin it straight from Feedly. The pin will link back to the original blog.
Buffer – Buffer is an app that I use to schedule Tweets so that they’re spaced out throughout the day rather than sent all at once as I read blogs. If I read a blog post that I really like, I’ll send it to Buffer to share with others.
IFTTT – If This Then That is an app that sets up certain actions based on commands that I give. For example, if I star an article that I like in Feedly, it will automatically send it to my Evernote notebook with tags that I set. There’s a whole list of IFTTT recipes for Feedly here. 
Evernote – I can send items straight to my Evernote notebook from Feedly as one of the sharing options.

2. Easy navigation
There are lots of easy keyboard shortcuts to use to go through articles when I’m reading on my computer, and it’s very easy to organize articles in categories. Even when I’m behind in my blog reading, I can get through it pretty quickly without feeling like I’m missing important content.

3. Marking articles
I know I can “heart” articles on BlogLovin, but I can mark articles on Feedly for later with specific tags that make them easier for me to find. For me, that’s a better equivalent to starring articles on Google Reader, and I did that a lot.

What I dislike
1. Somethings get lost in translation
Sometimes the pictures don’t get pulled into Feedly correctly (which might not be Feedly’s fault), and I probably miss out on some cool content because of it.

2. Commenting is more complicated
I still have to click to go to the external link of the original blog post to comment or read comments. This is especially complicated when I’m using the iPhone or iPad apps. When I’m on a mobile device, I usually mark the article I want to comment on for later and check it out when I’m back to my computer.

And the winner is…Feedly, mostly

At least for now, I’m sticking with Feedly. I still like visiting BlogLovin’ to find new blogs to follow, but my new strategy is to follow on BlogLovin’, and then I add it to a list called “On My Feedly.” Then I add the blog to one of my reading lists on Feedly. Then when I go into BlogLovin’, I can immediately mark the “On My Feedly” list as read because I’ll know I’ve seen it all on Feedly. There are a bunch of new blogs that I started following as I was trying out BlogLovin’ that aren’t on my Feedly list yet, so that will be a process to move those over. It’s not a perfect system, but I expected some growing pains in the transition. 
I’m going to continue to use BlogLovin to discover new blogs because that’s a huge benefit in my mind.
Where did you land in the Google Reader alternative battle? I’d love to hear what you chose and why in the comments section! 

Astaxanthin – Anti-Oxidant Superstar

While many antioxidants can be obtained by eating organic fruits and vegetables, astaxanthin is derived only from a specific microalgae called Haematococcus pluvialis.  The algae uses astaxanthin to protect itself from intense sunlight, ultraviolet radiation and low nutrition.

There are two natural astaxanthin sources: the microalgae that produce it and the salmon and krill which consume the algae directly. The best resources for these foods are wild-caught Alaskan Salmon and Krill Oil Supplement, which offer many other nutritional benefits.

Research indicates astaxanthin may benefit those suffering from inflammatory conditions including arthritis, rheumatoid disorders, metabolic disease, as well as cardiovascular, neurological and liver diseases.

Astaxanthin can also help to increase your muscle capacity and stamina, decrease workout recovery time, and decrease muscle pain.  Other proven benefits include:

Reduction of Inflammation
Protects Vision
Enhances Heart Health
Decreases Oxidative Stress
Protects Against Sunburn
Boost Your Immune System
Helps Prevent and Fight Cancer

Astaxanthin and Eye Health

Astaxanthin is an extremely powerful anti-oxidant:  65 times more powerful than vitamin C, 54 times more powerful than Beta-Carotene and 14 times more powerful than Vitamin E.
Astaxanthin crosses the blood-brain barrier AND the blood-retinal barrier which is a huge deal for your brain AND your eyes!

Astaxanthin is a member of the carotenoid family of anti-oxidants that include beta-carotene, lutein and zeaxanthin.   Of all the carotenoids, only zeaxanthin and lutein are found in the retinas of your eyes.  This is because your eye is a highly light and oxygen rich environment, and it needs a large amount of free radical scavengers to prevent damage. 
Scientists have specifically studied astaxanthin for its effects on the eyes and discovered that it is completely safe, and much more potent than all the other carotenoids.   Specifically it has been shown that astaxanthin supplementation can be effective in preventing a whole list of eye diseases including:

Age-Related Macular Degeneration
Diabetic Neuropathy
Cystoid Macular Edema
Central Retinal Arterial and Venous Occlusion
Glaucoma
Inflammatory Eye Diseases including retinitis, iritis, keratitis, and scleritis

Astaxanthin is one of the few anti-oxidants that you should consider supplementing because you cannot obtain the recommended dosage from your diet alone.      The good news is that there are excellent Astaxanthin Supplements available from companies like Jarrow, Doctors Best, and Swanson to name a few.   It should be taken with a meal with fat because it is fat soluble with dosage from 4mg – 12mg per day although there are no harmful effects from higher dosages.

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME in the Jacksonville Daily Record

WORKOUT ANYTIME was recently featured in the Jacksonville Daily Record. The article talks about the new WORKOUT ANYTIME that opened up Monday, October 6. The article talks about how the Levitt family looks to open 15 WORKOUT ANYTIME locations in the next 5 years in the Jacksonville area. 
View the full article here. 

Battlefield Hardline: Beginning July 15th, A Double XP Boost is Active ! [Notification]

Just a quick notification to notify those interested in Hardline to note that a Double XP Boost is Currently On! Note that the notification was noted on Battlelog, as of July 15th – unfortunately, I cannot tell at this time if it is a Premium-Only Boost or a Double XP Boost for ‘Everyone’, as I recently subscribed to Origin Access (to test it for one month, to see whether you ‘lose’ patches/etc that you have earned while it is ‘on’, which I will share as soon as I find out). Still, check out Battlelog and see if it is ‘on’ for you! http://battlelog.battlefield.com/bfh/ GOGOGO

See You In The Game!


[Update: As of July 20th, the Double XP Boost is now over… See you next time!]

MODERN SWEDISH BEDROOM DESIGNS GO SROP

Although they are all unique, and I noticed that some of the same elements that deserve to be underlined. First of all, all the bedrooms the images below, with large windows, which are usually thin stylish blinds or curtains. On both sides of a king-size bed is a traditional bedside tables, shelves or chairs for the original. The walls are painted mostly white, but here and there, you will find an interesting color interference: some of the rooms are nice backgrounds to illuminate the room. Details of lighting are particularly interesting to observe. Please take a look at this beautiful gallery bedroom and tell us what information you will find interesting.

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

modern swedish bedroom designs

MODERN SWEDISH BEDROOM DESIGNS

Berberine – for Cancer Prevention, Anxiety, Depression, Increased Fat Burning, and More!

Berberine – for Cancer Prevention, Anxiety, Depression, Increased fat burning, and more!

Berberine is a yellow alkaloid found in several plants/herbs such as goldenseal and phellodendron.   It is a powerful plant chemical with proven antibacterial, anti-inflammatory, anti-diabetic, anti-cancer, and immune enhancing properties.    Herbs containing berberine have a long history of effective use and there is considerable science backing these uses.
It is also extremely helpful for treatment of seasonal allergies traveler’s diarrhea, food poisoning, and as an oral hypoglycemic for Type 2 diabetes.

As per Dr. Michael Murray Berberine has been shown to: 
  • Produce results in clinical trials in improving Type 2 diabetes on par or better than conventional drugs including metformin.
  • Improve blood lipid levels better than statins.
  • Lower blood pressure in many subjects as well as any class of antihypertensive medication.
  • Improve liver function and promote anti-obesity effects.
  • Exert significant beneficial effects on digestive health and the microbiome.
  • Produce very encouraging experimental data in a wide range of modern health issues including cancer, Alzheimer’s disease, Parkinson’s disease and others.
How does Berberine work?

Berberine activates adenosine monophosphate-activated protein kinase (AMPK).  AMPK is sometimes referred to as a “metabolic master switch” because it plays an important role in regulating metabolism.

AMPK causes a cascade of effects within cells involved with maintaining energy homeostasis.  AMPK helps shift energy towards cellular repair and maintenance.   It has many of the same effects as increasing exercise while at the same time restricting caloric intake.

Other benefits of Berberine include:
  • Slowing the release of free fatty acids to help prevent harmful fat deposits
  • Promoting insulin, leptin, and adiponectin function for a healthy metabolism
  • Supporting healthy blood sugar levels already in the normal range
  • Promoting healthy insulin sensitivity
  • Promoting healthy gut microflora
  • Supporting healthy lipid metabolism
  • Stimulating the release of nitric oxide for healthy blood flow
Berberine Helps Ease Anxiety and Depression

Another benefit of AMPK is that it protects neurons and increases key neurotransmitters which improves brain function and psychological well-being.  So, it should not be surprising that several studies have shown that Berberine is very useful for anxiety and depression.

Berberine and Cancer Prevention

Berberine slows cancer growth and causes cancer cell death through a variety of mechanisms: tumor cell apoptosis and cell cycle arrest, inhibits blood vessel growth to tumors, inhibition of tumor cellular invasion and metastases (spread), etc.
One of the main anti-cancer targets that is inhibited by berberine is NF-kappa B. NF-kappa B is one of the most important proteins in our cells, acting as a key switch in the development and progression of inflammation and cancer.
·       Cancer (and precancerous cells) often have a permanently activated NF-kappa B, which keeps the cells proliferating and prevents them from dying (apoptosis.)
·       Chronic inflammation can also be a result of activated NF-kappa B, and we know that chronic inflammation can lead to cancer growth
·       Additionally, Berberine sensitizes cancer cells to the effects of radiation but NOT of normal cells. So Berberine may make radiation therapy more effective. 

Berberine also inhibits the tendency of cancer cells to become drug resistant over time by inhibiting the cellular membrane proteins that pump drugs out of the cell. When Berberine is taken with numerous chemotherapy drugs, studies have shown that they work synergistically to fight cancer.
Contraindications for Berberine

·       Displaces bilirubin and should not be administered to jaundiced neonates (may increase bilirubin levels due to displacement of bilirubin from albumin)
·       May cause a prolonged QT (a variable in cardiac electrical conduction) in patients with underlying heart disease
Drug Interactions

While Berberine is quite safe and well-tolerated, it may be contraindicated if you’re taking medications.  For example, Berberine may hinder absorption of tetracycline and other similar antibiotics, rendering them ineffective. Also, because Berberine significantly inhibits CYP3A enzymes — enzymes needed to metabolize most drugs — it can lower the clearance of medications, which in turn can augment their effect. This can lead to overdose, the risks of which will vary depending on the drug in question.

Berberine increases the effects of drugs that lower blood sugar so it is critical that you not mix Berberine with these drugs unless under the supervision of a physician.  IT is important to note that Berberine produces all the benefits of Metformin with much lower risks!

Sources of Berberine

Berberine is available as an isolated supplement OR through certain herbs such as goldenseal or Phellodendron.    Nexrutine is a patented Phellodendron Extract with high levels of Berberine that is particularly effective at reducing joint pain, improving mood, and reducing prostate inflammation and likely prostate cancer risk.   Phellodendron also has has a long history of being used to treat prostate inflammation and prostatitis.

reACT Trainer Total Body Circuit Workout

One of the best tools we have at our disposal at Workout Anytime is the reACT Trainer.  Staff who know how to use the product properly and teach others to use it can make a great impression on any member or guest and help to differentiate their club from competitors.

Although the reACT Trainer is a lower body and core trainer it is easy to create full body circuits using the reACT Trainer along with the key upper body movements including:

Horizontal Press (chest press of some type)

Horizontal Pull (Row of some type)

Overhead Press

Vertical Pull – (some type of vertical pulling movement)

Here is a sample reACT Trainer Total Body Circuit:

And More: Deals and Sales – Guild Wars 2 is $24.99 Right Now

Woohoo! I have no idea when it started and no idea when it will end, but I just saw this with my own two eyes… if you are looking for one last reason to get GW2, it is now on sale for just under $25 American Dollars. That’s about £15 British Pounds if you are from the UK, руб890 Rubles if you are from Russia, 1500 Rupees if you are from India and what works out to be about $10,000,000 Canadian Dollars:

I just might get my own copy finally and be able to stop begging others to play theirs (you know who you are)… Go to http://buy.guildwars2.com/ to get it while it’s On Sale and See You In the Game!

Proven Ways to Avoid Holiday Weight Gain

As we head into the holidays most Americans will gain between 8 and 12lbs between Halloween and New Year’s Day.  However, there are ways to avoid this weight gain!
Here are some key tips:
Eat before you drink and celebrate and before holiday parties.     Going into a holiday party on empty and hungry is a sure-fire way to overeat.    Alcohol intake boosts appetite to begin with and if you start out without anything in the tank it just gets worse!    This does not mean overeating – eat a sensible meal about 2 hours before you go to the party.
Try to choose higher protein foods first because protein helps with satiety (feeling satisfied and not hungry).
Fill up on Fiber Rich Foods – which also help with satiety and help create a feeling of fullness when consumed with water.  Focus on the raw veggies and yes you can dip them in some dip that has some fat because together fiber and fat can really assist in managing hunger along with protein.
Eat some fat – that’s right eat some fat!   Fats also are key for satiety.   That being said a little goes a long way!
Bring your own food to a party.   Rather than having only high calorie, high sugar and high fat foods bring something you enjoy that is also healthy along with you!
Eat slowly and chew your food thoroughly – seems simple and it is.    It is also VERY effective for limiting food intake!
Use smaller plates, bowls and glasses – all of which help to slow down food and beverage intake and make you more conscious of how much you are consuming!
Try to Minimize Sugar and Starch Intake – both sugar and starch wind up as glucose (blood sugar) and high intake drives insulin which results in rebound hunger.      High sugar and starch intake increases hunger – particularly when drinking alcohol because alcohol acts like a super sugar and also drives insulin response.
Pause before getting seconds – as with slower eating and deliberately chewing food this can give your body time to realize it is no longer really hungry.
If you are doing the entertaining have extra containers you are ready to give away so guests can leave with some of the extra food!

Try not to eat in front of the T.V. which distracts you from how you feel and results in mindless eating!
Consider planning a cheat meal but have a plan for how much you are going to eat!   One meal can knock you off course but most of the holiday weight gain comes from completely giving up on healthy eating for many meals.   Planning one cheat meal every week and planning on eating a set amount of the foods you may be craving can work for many people rather than mindlessly eating.      If you plan your meal including your portions of alcohol, sweets, fat and sugar you can limit the damage and still have a great time!
Drink Water.   Often quoted and still true – water is the best beverage and avoiding sugar laden drinks in favor of still or sparkling water can make a big difference in minimizing holiday weight gain.
Workout!   Working out improves mental outlook and burns some calories while reducing stress levels!    When we are stressed we overeat!   Just 10 minutes a day can make a big difference!

Get Your Sleep.   Lack of sleep is terrible for your health and particularly bad for driving appetite and overeating.   Lack of sleep causes hunger and excessive eating because the normal feedback mechanisms that tell you that you are full do not work properly when you are tired.   Basically, a tired brain tells you to eat to feel better and it is VERY hard to resist these urges when tired!

DECORATING IDEAS FOR GIRLS BEDROOM GOOD

True, the fairy tale castles and princesses to provide a wide range of ideas for rooms, but today, we would like to show you something new: the heart. You have seen the newspaper attracted to each student a sheet of paper or sticker. It is a known fact: girls love hearts. Therefore, these six theme rooms under furniture in cardiac function. The colors are also typical of girls (pink, light green, yellow, red, light blue). Chairs, pillows, blankets, nothing has escaped the powerful heart-shaped plan.Some these interiors are a little crowded for our taste, but again, this is not our goal manufacturers.

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM RED COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM YELLOW COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM PINK COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM BLUE COLOR

DECORATING IDEAS FOR GIRLS BEDROOM

DECORATING IDEAS FOR GIRLS BEDROOM

Battlefield Hardline: A Double XP Boost is Currently Active! [Notification]

Just a quick post to notify those interested in Hardline that a Double XP Boost is Currently On! GOGOGO http://battlelog.battlefield.com/bfh/

See You In The Game!

My Trip to Bangladesh June 2011

The assignment in Bangladesh is to evaluate the performance of a department within an organization. The interesting aspect is that the objective / mission of the department is, Organization Development of its other departments as well as partners of the organization. It’s going to be an interesting assignment. This will be a long assignment where I will be staying for 4 weeks in Bangladesh and travel to the north of the country.
The journey here was uneventful and arrived at my hotel tired but happy to be here. I am staying at the Asia Pacific Blossom Hotel; http://www.blossomhotel.net/ this will be my second stay at this hotel. I stayed at this hotel in 2006 during my first assignment in Bangladesh.
The assignment itself got off to a tuff start as the day of the launch of the assignment was a “Strike Day” in Bangladesh and apparently there are more strike days planned in the coming weeks. I am no stranger to Strikes / Harthal in Bangladesh and was in the thick of them when I was here on assignments in 2006 and 2008. At least this time it’s in support of oil and gas committee on the ConocoPhillips deal. The once planed during the week is for political issues; these tend to get violent and can be dangerous.

Workout Anytime on WBIR-Knoxville Afternoon Show

WORKOUT ANYTIME on WBIR-Knoxville Afternoon Show. Every Thursday WBIR has a healthy living segment that is sponsored by the Governor and April Nitzsche was the guest for this week on their show. April spoke about how viewers can be healthy throughout the day when they have a few minutes to spare to stay in shape in 2014. April talked about how to live healthy, and offer tips to viewers.  You also can view the video here.

Original Mexican Mazel Mex

  • 2.5 cups cold water
  • 1.25 cups cornmeal
  • Generous dash cayenne pepper and/or cinnamon
  • 2-3 Tbs. corn oil
  • 3 onions, peeled and coarsely chopped
  • 8 large tomatoes, coarsely chopped
  • 1-2 fresh green or jalepeno chilis, peeled and coarsely chopped
  • 1-2 cloves garlic, peeled and minced
  • Diet Start
  • 1 Tbs. fresh cilantro, chopped and torn into leaves
  • 1 Tbs. fresh parsley, chopped

Combine water, cornmeal, and cayenne. Cook, stirring frequently, over medium heat for 5-8 minutes. Pat evenly onto bottom of 8″ x 12″ casserole.

Sauté onions in corn oil until translucent and fairly soft (10‑15 minutes). Add tomatoes, chilis, and garlic, and cook 2-3 minutes. Pour mixture over cornmeal base and bake in 350° oven for 20-25 minutes. To serve, sprinkle with cilantro and parsley.

YIELD: 2 servings.

Although taste is bitter if tomatoes are unpeeled, the peels are an important aid to digestion.

Hazel Enchiladas

  • 6-8 corn tortillas
  • 0.25 cup corn oil
  • 2 recipes Mazel Cheese Mexican
  • 1 recipe cooked Salsa Mazel
  • 1 recipe fresh Salsa Mazel

Dip corn tortillas in hot corn oil, then into cooked salsa. Fill with Mazel Cheese Mexican, and roll into enchiladas. Cover with cooked salsa. Bake at 350° for 15-20 minutes. Serve with fresh salsa.

VARIATION 1 Add I bunch fresh spinach, cooked and chopped, to Mazel Cheese Mexican.

VARIATION 2 Add 1 tablespoon fresh mixed chives and parsley to Mazel Cheese Mexican.

VARIATION 3 Use 1 recipe Mazel Cheese and 11/2-2 cups sour cream rather than 2 recipes Mazel Cheese.

YIELD: 2 servings.

Depending on size of tortillas and how you fill them, you may wind up with a bit of extra filling. If so, add it to the casserole or reserve it for another use. But better too much than too little.

And More: Corel’s VideoStudio – Crashing When Using ‘Open With’ To Import Clips Into VideoStudio [Fix/Workaround]

Just last Month, I picked up version 20 of Corel’s recently-updated video editing suite “VideoStudio” (nomenclature “X10”) and am having a lot of fun learning what it can do and how to do it all (coming from mainly editing videos with Sony’s Vegas ‘Movie Studio’ line of products [now taken over by MAGIX]). However, I quickly ran into a little issue with importing clips using the “Open With” option in Windows and wanted to share what I found…

Normally, in Windows you can ‘right-click’ a video file and mouse-over the menu option “Open With..”, which brings up a sub-menu of known applications, to ‘send’ the file to (‘opening the file with the chosen application’). Doing this, whichever application you select will startup and the file will be sent to it to work with.

However, doing this with a video clip and VideoStudio x10 I found, every time the program would open up, it would immediately ‘crash’ (close/stop/etc). Hmm… time for some Troubleshooting! I double-checked that the file in question was not corrupted excessively by playing it, testing it in a couple of video/media players, and even tried a few other clips that were ‘known good’ (that VS worked with before). Each time, using “Open With…”, the Splash Screen for VSx10 would show up and then just as the program itself looked like it was opening, the entire thing would crash and show this message:

Example of the “Corel VideoStudio has stopped working” Error Window Pop-Up
when trying to import a clip into VideoStudio X10 utilizing the “Open With” shortcut in Windows

I then went to the Corel ‘Official’ Fora [Forii?] and did some searching to see if anyone ran into this same issue. Unfortunately, all I could find were people experiencing ‘general crashes’, that is, crashing and non-starts without it being specifically associated with utilizing “Open With..”.

I then decided to try these same ‘testing files’ on some other video editing programs I have installed, such as Sony’s Vegas Movie Studio (now owned by MAGIX, the same company that makes the Movie Edit Pro product line, which I have no experience with yet, at this time). Using the “Open With..” command, Movie Studio was able to open and import all of the video clips without issue – so then, what’s up Corel? /tilthead

I thought of trying VideoStudio ‘on it’s own’, not importing or ‘sending’ anything to it – just opening the program and seeing if it works… Everything opened fine! I was just playing with the program the other day in fact, learning some of the features it offers [I’ll have to write a short ‘Review’ or at least a ‘First Impressions’ sometime of it]. So why was it being ‘fussy’ (to use the highly technical term)? I tried opening and closing the program a few times thinking about it, when I noticed that when I opened VideoStudio X10, I was being greeted by a nice-and-helpful “Welcome” StartUp Page…

The “Welcome” Section of VideoStudio
(Click to see Full Size)

Indeed, ‘The “Welcome” Startup Page’ offers a lot of helpful information on opening VideoStudio. There are Tutorial videos on some of the New Features for that version and even Basic Tutorials and Help File links. But wait – no editing interface! No Timeline, no Media Library to add clips – that’s it! That’s the problem! I went into the Settings to see if there was a Preferences option where I could set the Section to open VideoStudio to be – not the “Welcome” section, but the “Edit” section – the tab/area where all of the editing/mixing and importing takes place. There it was: Default Startup Page – and it was set to “Welcome Book”…

The Corel VideoStudio X10 Preferences Window
showing the Default Startup Area/Section which is shown when the program starts
(Click to see Full Size)

A simple pull-down menu change to “Edit” and that was it! Now, VideoStudio is opening to the “Edit” section/area every time. So, I tested it out: right-clicking on my video clip and mousing-over “Open With..” and then clicking on “Corel VideoStudio” – it worked! VS opened up and in a few seconds more, my little video clip was right there on the Timeline, waiting patiently to be edited. Woohoo!

Example of Corel VideoStudio x10 Starting Up In The EDIT Section
(Click to see Full Size)

Here is a video version of the steps above, made showing the error when trying to use “Open With..”, what happens and how to change it, as well as the final ‘working’ result of changing the option (after I finally figured out what it was):


[VIDEO NOT YET COMPLETE, IT WILL APPEAR HERE ONCE FINALIZED AND UPLOADED TO YOUTUBE]

Hopefully this will help any of you dear readers, who use VideoStudio and were running into this error/crash/issue when opening clips with VS (trying to use “Open With..”).. Enjoy and Have Fun editing your gameplay clips once again!

~Troy from The Game Tips And More Blog


[I’m calling this a Workaround, since this is more of that than a true ‘Fix’… It does not solve the base issue of VS not being able to import a clip using “Open With” without taking taking these steps (whether this is more Microsoft’s fault or Corel’s fault is beyond the scope of this post …and being more experienced in computer hardware than computer software (programming, etc), I would not have completely isolated the very base cause of the issue anyway – or at least, could not offer a 100% explanation of what is occurring)]


Note: I am not affiliated in any way with Corel and I have not, and I will not, be compensated for mentioning VideoStudio or any other of the products herein, in any way.  I have used other video editing products than these in the past, and will do so in the future, including free editing applications, such as VirtualDub, AviDemux, DVDVideoSoft products and more… I am merely an enthusiastic gamer-and-sometime-editor and wanted to share information that I discover about these products to help other gamers record-and-edit and have fun doing it, if I can do so.

The Amazing Power of Focus

I frequently like to put on music while I work, and I sometimes do that in my classroom, too. I’ve rotated through many Pandora playlists, and I use Spotify a fair amount. I like the music on those sites, but they’re more for entertainment than work.

I’ve finally found a resource that really seems to help me and my students get into the zone and focus.

Let me introduce you to my favorite new website, [email protected]

This website allows you to listen to instrumental music from a variety of genres that has been specially selected to get you into a state of “flow.” The music is sequenced in an order that draws on neuroscience and research about the impacts of music on productivity. They have a huge section documenting the science behind the playlists. 
I tried this site while reading some really dense texts for a PhD class, and I really felt like it helped me stay focused and productive. I cruised through the articles in record time! I also had it playing while I worked on writing this morning, and I do feel like it’s impacting my personal productivity. It seems to be helping my students as well. 
They have two membership levels — a free version and a paid version. The free version gives you 60 minutes of each playlist before stopping. You can listen to the playlists multiple times, but it will always be the same playlists. The paid version allows you to set a timer, customize playlists, listen to unlimited music, and track productivity for $4.99 billed monthly or $45 billed annually. I’m currently using the free version, but I suspect it won’t be long before I upgrade. It’s having a big impact on my productivity. 
If you like to have music on in the background while you or your students work, I’d definitely recommend giving [email protected] a try. I’d love to hear about your experiences with it in the comments!

I like www.focusatwill.com so much that I’ve become an affiliate with the site. This means that if you click the links above and subscribe, I’ll receive a very small commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CRF, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

HOME DECORATING WITH ASIAN STYLE

Asian themes uses bright and vibrant colors, and thus, it might not always be a good idea to do up the whole house using this theme. It is always better to concentrate on some part of the house and use it as the focal point by decorating it using the Asian theme. There is heavy dependence on texture and color in this theme, and this needs to be kept in mind.

Home Decorating With An Asian ThemeHome Decorating With An Asian Theme


Home Decorating Room With An Asian ThemeHome Decorating Room With An Asian Theme


Home Decorating With An Asian Theme Bed RoomHome Decorating With An Asian Theme Bed Room

One of the best places to decorate using the Asian theme is the dining room of the house. When the dining room is decorated, one obviously can use the vibrant colors but besides one can also add decorative pieces on the table. One can use things made of bamboo or Chinese utensils which are very famous in the Asian area.

The Incredible Benefits of Grounding – Walking Barefoot on the Ground!

Anyone with small children knows they want to try to ditch their shoes every chance they get – but if you think about how you feel when you are barefoot you will probably realize that you  also feel better when you can walk around barefoot.  Researchers have begun to unravel why being barefoot directly on the ground can in fact be very good for your health!
Your immune system functions well when your body has an adequate supply of electrons, which are easily and naturally obtained by barefoot contact with the Earth.
Research has shown that electrons from the ground have measurable antioxidant effects that can protect your body from inflammation. For hundreds of thousands of years on the planet humans have been in direct contact with the ground without anything that would block the flow of electrons into our bodies.
However in modern time’s pavement, wood, rubber, plastics and many other forms of non-conductive material are between our feet and ground blocking the natural flow of electrons.
The surface of our planet has a negative electrical potential. So when we are in direct contact with it electrons flow to your bod through a process called “grounding”.   Grounding causes positive physiological effects that promote optimum health.
Specific researched benefits include improvements in blood viscosity, heart rate variability, inflammation, cortisol dynamics, sleep, autonomic nervous system (ANS) balance, and reduced effects of stress.
When you connect directly to the ground without any non-conducting material between you and the electron field of the planet there is an improvement in the balance of two sides of your autonomic nervous system:  the sympathetic and parasympathetic nervous systems.
How Shoes May be Impacting Your Health
Materials like metals are excellent conductors of electricity (aka electrons!). The human body is also conductive because it contains a large number of charged ions (called electrolytes) dissolved in water.
Other non-conductive materials, such as plastic and rubber, have very few free or mobile electrons. Traditionally shoes were made of leather, which is a good electrical conductor. However almost all modern shoes contain rubber and plastic which block the flow of electrons from the earth to your body.
The Health Benefits of Grounding
Your immune system body has evolved a method of destroying bacteria and viruses by generating reactive oxygen species (ROS) that are delivered by immune cells. However, these ROS can also cause extensive damage to healthy tissues. ROS are usually positively charged molecules that need to be neutralized immediately to prevent damage to the body after destroying bacteria or viruses.   This is one of the key functions of anti-oxidants which are most important in immune cells to protect them from the ROS they generate!
Anti-oxidants essentially provide a supply of negative charges. Food based antioxidants (such as Vitamins C and E) and anti-oxidants your body produces are critical but a regular supply of electrons grounding can supply them as well.
Evolution facilitated the process of grounding by providing conductive systems within your body that deliver electrons from your feet to all parts of your body. This system has been integral to human physiology for thousands of years. Negative electrons are always available, thanks to the Earth, to prevent the inflammatory process from damaging healthy tissues.
All of this was interrupted when we started to wear shoes with rubber and plastic soles, and no longer slept in direct contact with the ground. Several experiments have proven that a person who is grounded is less stressed and more relaxed.
So have some fun, kick your shoes off and get back to nature!
How to get the benefits of Grounding
Grounding is simple in warmer climates – simply spend time barefoot in direct contact with the earth.   Even better do this on a beach walking along the edge of the water because the flow of negatively charged electrons will be highest here because sea water is an ideal conductor of electrons!    Any amount of time will help but the more you can do it the better!  Even better spend some time laying on the beach or ground with your body in direct contact with the ground without any artificial fabrics, rubber or plastic between your skin and the ground.
For those of us who do not live in warm climates staying grounded during colder months is a bit more challenging but doable! There are actually grounding mats available that plug in to the grounding wire port of a normal 3-prong outlet or a grounding rod (US and Canada only). The earth’s natural electrons flow right up through the ground wire and onto the mat, even if you’re in a high rise. Most mats come with an outlet tester you plug in to the outlet so if your outlet is configured properly.

My Trip to Bangladesh Cont…..

The assignment is proceeding well, the evaluation questions have been designed and the questionnaire and show cards are prepared and translated in to Bangla. I will be using an “In Depth” interviewing technique. The evaluation itself has 2 aspects to it. Firstly; to looking at the internal mechanisms which either makes them effective or not as the case may be (As an internal service provider) and; secondly, getting conformation from outside the Unit (As an external service provider) to establish if they were effective. The main internal interviews have been conducted and now I have to conduct the external interviews. The external interviews are going to be held in the districts of Dinajpur, Nilphamari and Lalmonirhat. I will have to undertake an 8 hour journey over road to get to Sayedpur where I will be based. Hope to get back to Dhaka on the 15th.

Kneeling High to Low Chop – The Best Core Exercise You are Not Doing!

Core stability is a big buzzword in fitness, and for very good reason.     The ability to keep the core stable is essential for proper movement and prevention of injury.      Stability has three aspects related to the planes of movement:
Sagittal Plane Stability– is the ability to prevent flexion and extension of the core from the low back to the top of the head.
Front Plane Stability– is the ability to prevent lateral flexion of the core from the top of the head to the low back.
Transverse Plan Stability – is the ability to prevent rotation of the core from the top of the head to the low back
Stability is about preventing movement – not creating movement!   All muscles can act as stabilizers, movers, or absorbers, but the muscles of the core spend a lot of time preventing movement in many activities from running to walking to jumping.    This is why exercises like the plank are considered functional because the plank is about using core muscles to prevent movement of the core as opposed to exercises like a crunch which is about creating movement.
To have a strong and stable core it is important to perform stability exercises in all three planes of movement.     The plank and side plank do a great job of challenging muscles to prevent movement in the sagittal and front planes, but that leaves the Transverse Plane.    This is significant because the vast majority of injuries occur in the Transverse Plane with Frontal Plane injuries close behind.
It is also important to note that rotational movement (movement in the transverse plane) is fundamental to human movement in general and the generation of explosive force in many activities from Golf to Tennis to Boxing.
One of the best ways to develop rotational stability in the Transverse Plane is doing high to low anti-rotation chops in a half kneeling position using either resistance bands or cable resistance with a rope handle or pole attached.
Execution

The anchor point of the resistance band/location of the cable handle should be position up high.     Your body should be facing perpendicular to a line from the handle/anchor point straight down and across your body.     You should be in a half kneeling posture down on one knee (the leg closest to the cable/band should flexed with foot flat on the floor and hip and knee bent at 90 degrees.   
The other knee should be down on the floor (use a cushion or mat!) with shin and top of foot along the ground directly behind the knee.   It is important that the knee is directly under the hip.  It is also important that the spine be held straight with a straight line from top of head through the spine and hip to the knee on the ground.    Extend the spine fully and keep your spine fully elongated throughout the exercise.
Reach across the body and place both hands on the resistance band/rope spread apart with hands shoulder width apart.gripping the band/rope.
Keeping the shoulders and hips facing forward the entire time pull the rope/band directly down and across the body and pause in the bottom position making sure there is no movement to in the shoulders or hips while maintaining a fully lengthened spine.   Then slowly return to the starting position.    Form is VERY important in this exercise.
Here are two great instructional videos:
http://www.stack.com/video/3730538400001/elite-performance-with-mike-boyle-increase-core-strength-with-anti-rotation-exercises

http://www.muscleandfitness.com/workouts/abs-and-core-exercises/videos/half-kneeling-stability-chop

Battlefield Play4Free – PlayTesting The AEK-971 Assault Rifle (One Full Round – Myanmar – Raw Gameplay [Unedited] Video)

Battlefield Play4Free and The Daily Draw

Just a quick primer for those that don’t know; Battlefield Play4Free is a Free-To-Play title, which means it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money. In this game, you do so by purchasing “Play4Free Funds” that you can then use in the in-game Store. There is also a nice feature offered where you can win ‘prizes’ (weapons, armor, clothing, etc) from a game called The Daily Draw at the main Battlefield Play4Free website. You can play once every day, choosing a card from a random draw of eight and the card you choose will be an item ‘underneath’.

The items possible to win range from temporary one-day-use-only weapons and clothing, to seven-day-use ones, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future. The Daily Draw also gives a chance to win ‘Boosts’, where you can earn extra Credits [for instance], as seen in the screenshot below:

The AEK-971 Assault Rifle

I recently won the AEK-971 in The Daily Draw on my Assault class soldier and thought I’d try it out and see how it felt and quickly write a post about it [I call these ‘PlayTests’]. Now, I am not a gun expert or know a lot about the statistics of the guns, so I will mainly be discussing briefly here how the gun ‘feels’ and ‘plays’, especially compared to the default G3A4 Assault Rifle.

The AEK-971 unlocks nice and early at Soldier Level 3, but the main reason for this seems to be that it isn’t supposed to be very different from the Default Assault Class Rifle. As you can see from the comparison above, which is the main Store/Inventory screen information for the weapons, the only real difference is the amount of damage it can do. It has the same accuracy rating as the G3A4, the same range, and the same amount of ammo in the mags. After winning it in The Daily Draw, I played a few rounds with AEK-971 and originally recorded a couple of full matches. Here is one full match, shared unedited for you [a ‘Raw Gameplay’ video], testing out the AEK-971:

I was also testing out the Trial of CyberLink’s PowerDirector 12 for editing.
A Review article about that application – with Tips – Coming Soon™!

Despite not being listed as any more accurate than the G3, I felt more ‘capable’ with the AEK (as though I could ‘put up a fight’ a lot better), probably due to the increased damage. It feels a little more accurate too, even though it isn’t really supposed to be, according to the Store/Inventory info for the gun. So, I figured this is a great time to do some testing! [Yay, tests! lol]

AEK-971 Accuracy Analysis

I did some basic analysis on the recoil pattern of this rifle and it is indeed similar to the default assault rifle, but the AEK is ever-so-slightly more accurate, in my opinion. Here is an example of a test I did, a screenshot of the spread patterns, collecting the bullet markings, below:

Coloured spray paint marking the AEK-971’s Bullet Spread, on average
(Click to see Full Size)
  • The left side is the spread while ‘shooting from the hip’, not using the sights, just standing there holding down the trigger  [the spray painted arrow is red-coloured as in, ‘try not to do this at all if you can, unless in very close quarters combat’]
  • The right side is the spread while ‘zoomed in’, that is, using the sights on the gun (it would use a scope if there was one), still just standing there holding down the trigger  [the spray painted arrow is yellow-coloured as in, ‘try to avoid this’]
  • In the middle is the spread while zoomed in/using the sights, crouching down, still holding down the trigger though – but also now compensating for the recoil of the gun (attempting to contain the spread into a small area) – in this case, slowly pulling DOWN the mouse while firing since the recoil of this gun pulls the barrel UP  [the spray painted box is green-coloured as in, it is recommended to do this (even better if you can tap the trigger instead of holding it down)]

As you can see, even though the rated accuracy for this gun is “Low”, you can get a pretty decent containment of the spread, by kneeling down, using the sights, and compensating for the recoil by moving the mouse accordingly [this little tip helps with all guns].

In most games, you can try to compensate for the recoil of a gun by slowly moving the mouse in the opposing direction to where the barrel travels. For instance, if the recoil pulls the barrel of the gun left, when shooting, moving the mouse to the right then, will cancel out some of the recoil and make for a smaller spread of bullets and easier/faster repositioning for the next shot. Try to remember that each gun will be  different in it’s recoil and which direction you should compensate, when using each weapon though. 
[Note that due to game programmers making bullets ‘miss’ (no matter what), in an attempt to imitate reality (which has imperfections in the gun and bullets, air changes, etc), it will never be possible to fully compensate/correct for the ‘spread’ of bullets in a gun (this goes for most games)]. 



In my tests, the Assault Default G3A4 seemed to pull up and away to the left slightly, when shooting it. Holding down the trigger longer, the gun climbs way up into the sky easily (hence the “Low” Accuracy rating, I assume). For the AEK-971, it does still pull up, but it does not pull to the left in the same way as the G3A4, especially when using the sights. It sort of does a light ‘stepping’ to the left and then to the right, somewhat randomly [whatever the algorithm is in the programming]. This, to me, makes it ever-so-slightly more accurate in the ‘feel’ of the gun, because while it still ‘goes all over the place’ when shooting, it sort of compensates for itself just a bit, and the end result is more of a direct climb up in the recoil, something that felt, to me, easier to compensate for than with the Assault default G3. (I assume this very slight change in the spread/recoil is not enough to win this gun a “Medium” rating in Accuracy, but it is enough to make you have to Level to 3 in order to be able to purchase it..).

Close-To-Medium Range Kill with the AEK-971 in Myanmar. Even with the ‘side-stepping’ that the gun does (and the enemy strafed around as he ran out towards me from behind the rock in the center of the screen) I still got the kill, mostly due to the Very High Damage Rating of the weapon
(Click to see Full Size)

In Conclusion

Overall, the AEK-971 was similar to the default Assault class rifle, the G3A4, when playing. To me, it did feel slightly more accurate, but not by much. If you are having a really hard time hitting people with the G3A4, your accuracy won’t increase very much at all if you purchased this rifle. However, if you are getting used to the default Assault gun, this one packs a lot more punch, and you’ll be getting more kills overall if you upgrade to it. Because I recently won this gun Permanently [during the course of compiling this article, yes it does happen in The Daily Draw! woot] I can’t see the current price for this rifle anymore, to purchase it from the in-game Store; but last time checking, it was only 300 Credits to try it out for one full day. It was also listed as [what I call] ‘Earnable’ because, if you can rack up 45,000 Credits, you won’t have to pay for upgrading to this rifle with any Real Money at all (you can just use the Credits). If you did buy some Play4Free Funds and have 1,250 to spare, you can purchase it at anytime (not having to wait until Soldier Level 3), permanently. So in closing, PlayTesting the AEK-971, I found it slightly better than the Default Assault Class Rifle, even if it only ‘felt’ that way due to the higher damage it does.

Long Range Kill with the AEK-971 in Myanmar. The thin iron sights of the gun (default sights) help a lot with targeting farther away. With the Very High Damage Rating – even though the gun has a Low Accuracy Rating – single-shot/tap shooting can still make it lethal at range, when needed
(Click to see Full Size)

Have fun trying it out for yourself sometime and See You In The Games!

Gameplay Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

It’s Not Just You™ – HumbleBundle ‘Vegas Pro, Discover Creative Freedom’ Installer/Registration Not Working [Notification]

For the next two weeks (13 Days, according to the Countdown at the HumbleBundle Website, starting today) there is a fantastic offer for Video Editors, Music Composers, Web Developers and more – over $900 worth of Software, including Sony’s Vegas Pro [the Vegas Editing Product Line was bought out by MAGIX, a German software company that has produced it’s own editing software for years, popular for their “Music Maker” and “Movie Edit Pro” lines]. So what’s the issue? Well, this Bundle is so darn popular, many parts of it aren’t working/responding, at this time. For example, if you run into the Installer ‘starting but just closing/crashing’ or the store or program ‘not registering’ or the ‘website is down’… just letting you know… It’s Not Just You™

Part of the reason why this Bundle is so popular (although many HumbleBundles are quite popular at different times), is because one of the main pieces of Software offered is Vegas Pro Edit, originally by Sony. This video editing software is a Premium Version (“high end”) of this program, normally being sold at around $400. Along with other great products, such as Magix Music Maker, Xara’s Photo and Graphic Designer, Xara’s Web Designer, Photo Story Deluxe and more – it’s easy to see why this Bundle is so popular, for all kinds of content creators and producers. Indeed, if you are into (or trying to get into) making music, editing video, or web design, at all; I highly recommend picking up this fantastic bundle of software, if you can. The link/URL to the HumbleBundle directly, is here:

https://www.humblebundle.com/software/vegas-pro-creative-freedom




For those unfamiliar with HumbleBundle, it is a retail site that offers a mix of software, books and games, connected to and donating a portion to, a customer’s chosen Charity. For example, my account is connected to Extra Life, the ‘Gaming Marathon’ Fund Raising charity that I try to play for every November, on behalf of Children’s Miracle Network Hospitals. Because I attached this Charity to my Account, any purchases I make will contribute a portion to my charity. One of the greatest things about HumbleBundle however, is that the products – although one is not able to choose which products to buy specifically – are usually offered in ‘portions’ or ‘packs’ for any amount that you can afford to pay (as low as $1 up to whatever you can pay for the software company/charity/etc); and the more you can pay/donate, the more software/books/games/etc you will get. Since 2010, these ‘Pay What You Want’ Bundles (for Windows, Mac and Linux) have become quite popular over time.

The issue that has arisen this time then, is that the Bundle is so popular, that the server for the Installer has become Unresponsive (“not working”). Even the Website for the Retail/Vendor/Developer itself has become Unresponsive, giving this Error Message [to me] seen below (from Chrome):

As also sometimes happens with the most popular HumbleBundles, some people are experiencing very slow Downloading of their purchased products (as in 256kBps or less). Others are experiencing the Installer for the products stops functioning. This is what I personally am experiencing too (the Installer seems to startup, but then ‘crashes’ (or at least disappears) and is unable to continue. After one random attempt, I got a message stating that the Installer actually tried to Download the Installation Files but could not properly communicate with their servers. The message that came up [for me] can be seen below:

Trying another time later on, I did see the Installer for the ‘MAGIX Music Maker 80’s Version’ pop up and start Downloading, which was nice to see; however the overall download speed was pretty slow [understandably] at about 300kBps.

If I may make a Suggestion then – if you are running into any of the issues above, at this time: my suggestion would be, to definitely pick up the Bundle if you can [Note: You have to purchase the Bundle for at least $20 to get Vegas Pro] – then wait a while before you attempt to install anything. According to the MAGIX website, you can access your purchase (to install it) anytime after buying it, from now until September 2018 [Note: A free Magix account must be created if you do not already have one]. So, there is no rush, once you purchase it, to get the Installation Files from MAGIX. I also recommend backing up your Installation Files, once Downloaded, onto a USB drive, External Drive or even Optical Disc – anything that can back up your purchase for future re-installation, if needed (at least, until you buy a newer version of any applications you like..).

By the way, a quick note about Vegas Pro ‘Edit Version’ (about a 450MB download) – for those wondering about the difference between the Vegas Movie Studio versions and the Vegas Pro versions (and what the ‘Edit’ identifier means), here is a short summary of the differences:

  • the Movie Studio versions of the editor are an easier-to-use, scaled-down version of the Vegas editor, with still many features, allowing up to 200 Tracks of Events (clips/media) – increased from 20 Tracks recently! It just lacks many of the advanced features of the Pro versions (such as the  ‘NewBlueFX Titler’ [professional version], Bézier Tool Masking (“any shape”), et.al). The Movie Studio version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-movie-studio/product-comparison/#productMenu

  • the Vegas Pro ‘Edit version’ of the editor costs less than the other Pro(fessional) versions, as it is missing the DVD/Blu-Ray authoring package, as well as some advanced filters and creation utilities (such as the Boris FX media generators, et.al) – it is still a ‘full featured’ Professional-level Video Editing program however, allowing Unlimited Tracks, full 4K Support, Bézier Tool Masking (“any shape”), includes the ‘NewBlueFX Titler’ [professional version] and much, much more. The Pro version comparisons can be found here:

    http://www.vegascreativesoftware.com/us/vegas-pro/product-comparison/#productMenu


[Note that the links above will show the most recent versions of the programs, but the comparisons themselves (the effects and capabilities of each) will remain similar, despite the edition versions changing over time]

Here is a capture of the Vegas Pro ‘Edit version’ comparison, for the 14th edition [CAD prices, sorry]:

Although the Vegas line of editing products have always had a bit of a learning curve due to their more advanced capabilities (Sony used to give out a DVD with some introductory courses for it; I am privileged to say I have one of these), MAGIX has created a few tutorials of their own, which can be found at the MAGIX Vegas Pro Tutorials website, here:

http://www.vegascreativesoftware.com/us/vegas-pro/online-tutorials/

So, try not to let it bother you ‘too much’, if you have run into any of these issues (downloading, installing, registering, etc). Just wait a little while longer and try doing it again, in the near future. For now, don’t worry – It’s Not Just You™…

Good Luck with it – and Have Fun!
[Note: I am not affiliated with Sony, MAGIX or HumbleBundle in any way, and I will not receive any compensation for mentioning them here – I am merely an enthusiastic user of their products and wanted to share what I felt was helpful information/notification. I have used other video editing programs in the past (such as PowerDirector, Nero Vision and Windows Movie Maker and some free video editors, such as Avidemux, DVD Soft’s FreeVideoEditor and VirtualDub) and will still use them when desired in the future]

Addendum:

During the time it took for me to compile this posting, I was able to try again and began Downloading then eventually Installing Vegas Pro [Edit version] – and it is going smoothly still – however, Downloading of the various applications in the Bundle are still quite slow. 
If you do not mind that, dear reader, go ahead and try again now; otherwise, as in my Suggestion, perhaps wait a while (as in days) before attempting to have a fast/smooth installation of these popular applications. 

And More: A Simple Explanation Why ‘Loot Boxes’ May Be Considered “Gambling”, In Games Like Star Wars Battlefront II, Et Al… [Editorial]

((Portions of this article
may or may not have
information obtained
from this unidentified
Imperial Officer))

Recently, in the game Star Wars: Battlefront 2 (EA, Dice), there was the introduction of “Loot Boxes”. These are purchasable ‘crates’ that can contain multiple items. These items are generated randomly (RNG, Random Number Generation) and are obtainable by using “RealLife™” Money [my superscript as pun] – and therein lies the problem being discussed.

In an attempt to explain it simply on a Steam Forum Thread a few days ago, I posted the comment below. I replicate it here, to share with others, so that this whole ‘issue’ may be understood more fully:

“If I may pop in, to explain the reason why “loot boxes could be considered gambling”; it is due to a few factors:

– There is an RNG factor in the potential items from the Loot Boxes (the items are random, and some items are worth more than others)

– The inclusion of the possibility of utilizing RealLife™ Currency to obtain them.
[Because of this element, more than anything, it could possibly be construed as “gambling”…]

– Because the items (1) can be exchanged in the game for other items that ‘cost RealLife™ Money (2), they are ‘gambling on the possibility’ that they will ‘save money’ if there are better/higher items in the Box purchased (i.e. they will ‘save money’ if the RNG produces higher/better items in the Box; they will not have to buy much more)

Together, all three points mean the game essentially has “gambling” within it…
I assume the reason why some parents are getting upset about it, is that there is a possibility of a Minor using their RealLife™ Money to obtain the Loot Boxes (in any game).

The solution is simple however; remove the possibility of utilizing RealLife™ money to obtain the Chests/Boxes/etc OR the possibility of getting ‘better items’ that will ‘deconstruct into elements that can accrue to get better items’ (“saving money” if the better items appear via RNG) and there is no longer the possibility of it being “gambling”, as it were.”


The above points, along with the fact that the ‘items’ can actually affect a players’ performance (i.e. a person with more items or better items can actually live longer or do more damage than someone without the items), is the sum of the whole problem that is upsetting many gamers, the entire issue becoming aflame in the recent release (Nov.17th) of “Star Wars: Battlefront II”.

Other games (eg. “Team Fortress 2”), handle this concern for the most part by making sure that the items contained in their ‘loot crates’ are only ‘cosmetic items’ (hats, skins, costumes, etc) that do not affect player performance against other human players. It remains to be seen whether the “RNG Factor” involved in such ‘Crates of Loot’ in these other games, like TF2, are going to still become a ‘gambling’ issue, or not.

Hopefully this helps you dear reader, in understanding the issue at hand and why some people are getting ‘up in arms’ about it at this time. 

~Troy from The Game Tips And More Blog

The Role of B-Vitamins in Preventing Brain Loss

One in five people older than 70 suffers from cognitive impairment which will progress to dementia and death in half of these people within five years.  So it is very important to address all the modifiable risk factors for cognitive impairment.   One of these risk factors is elevated homocysteine which is a strong, independent risk factor for Dementia, Alzheimer’s Disease, and Heart Disease.  
One of the longest and most comprehensive studies ever done showed that one in six cases of Alzheimer’s Disease can be caused by increased homocysteine levels.
In order to process homocysteine properly the body needs adequate levels of Folic Acid (Vitamin B-9), vitamin B12, and Vitamin B6.   A double-blind randomized controlled trial showed that the reduction of homocysteine by B Vitamins can slow the rate of accelerated brain atrophy in people with mild cognitive impairment which is often the first step towards Alzheimer’s Disease.
Another study showed that B-Vitamins can reduce brain loss in areas prone to the Alzheimer’s Disease process. 
Other Benefits of B-Vitamins
B-Vitamins as a group are incredible important to a wide range of cellular and metabolic functions from energy production to production of hormones. Benefits of optimal levels include increased energy, improved mood, reduction of allergy symptoms, help preserve vision, help to maintain bone strength, and help prevent heart disease and stroke.
How do I get B-Vitamins?
Although it is possible to get the RDA of B-Vitamins through diet alone it requires a carefully planned diet and for vegetarians it is very challenging because there is no vitamin B-12 in vegetables. Milk, yogurt and cheese, along with eggs, are the only vegetarian food items that naturally contain significant levels of vitamin B12.
In addition many people have conditions which prevent optimal absorption and cellular uptake of certain B-Vitamins such as Folic Acid.   Each of the key B-Vitamins come in several forms with some being much more active and effective than others.   When everything works right the body can convert other forms to the active forms, but there are many things that interfere with this process.
For example Intrinsic factor produced in the stomach is what allows the intestines to absorb this vitamin.  Not everyone produces intrinsic factor so common sources of B-12 are not effective.
Also since B-Vitamins are water-soluble excess amounts are easily and safely excreted so taking a high quality B-Vitamin Supplement or Multiple Vitamin with activated forms of B-Vitamins in adequate amounts is the safest way to cover yourself.    In addition, although each B-Vitamin performs critical functions in isolation they also work together to optimize many functions so taking a complete B-Vitamin Supplement is highly recommended.
What are all the B-Vitamins?

B- Vitamin          Active Form                                                    Inactive Form
B-1                        Benfotiamine                                                Thiamine
B-2                        Riboflavin-5-phophate                                 Flavin Monocleotide
B-3                        Niacinamide                                                 NAD                                        
B-5                        Panthothenic Acid                                         None                   
B-6                        Pyridoxal-5-phospate                                    Pyridoxine Hydrochloride
B-7                        Biotin                                                             None
B-9                        Methyltetrahydrofolate  aka Metafolin         Folic Acid                                         
B-12                      MethylCobalamin                                         Cobalamin
Can you take too much of the B-Vitamins?
For certain ones the answer is yes!  You should not take in more than 800mcg of folic acid supplement.  Too much can mask a condition called pernicious anemia.  Multiple Vitamins and B-Complex Supplements will contain 400 – 800mcg and more from diet is not a problem.
For vitamin B-6 intake above 200mg per day is not recommended.  Again multiple vitamins and B-Complex will generally contain less than this amount and more from food is not an issue.
Regular “Niacin” can cause significant skin flushing and itching, but this is harmless although it can be very uncomfortable.    Extremely high dose niacin can be used to treat high cholesterol levels but the regular form that causes flushing can also cause liver issues at high levels.   This is also true of “time-released” forms.     The best form for use for cholesterol is “Flush Free Niacin” aka Inositol Hexiniacinate as it will not cause these issues.   NAD (Nicotinomide Adenine Nucleotide) is very safe but there is no reason to take more than 10mg per day.
As always do not take any supplement when pregnant without consulting your registered health care professional.

WORKOUT ANYTIME on CNN Money

WORKOUT ANYTIME on CNN Money in an article titled, “What’s next for Blockbuster’s empty stores.”  The article gives information about the recent announcement that Blockbuster will be closing their remaining locations, and how this benefits franchises looking for real estate in growth markets. WORKOUT ANYTIME is featured at the beginning of the article with info about WORKOUT ANYTIMEopening 20 locations in former Blockbusters and looking to open more. Randy is quoted about why the locations are ideal and how easy it is for them to convert the real estate. Jeff is quoted about the great location and how easy it is to tell members of the community where to find the gym. The article also states that WORKOUT ANYTIME is looking for more Blockbuster stores to convert to WORKOUTANYTIME locations.  Click here for the entire article or begin below.

What’s next for Blockbuster’s empty stores
By: Patrick deHahn

Blockbuster’s closing signals the end of an era, but it also means there’s a lot of retail space to fill.

Last week, Blockbuster announced plans to shutter its remaining 300 U.S. locations. It was the final nail in the coffin of a steadily declining brand, which was bought by Dish Network (DISH, Fortune 500) in 2010 after the retailer went bankrupt.

(Read More)

‘Setting Of The Month’: Bandicam’s Xvid Implementation (with Screenshots and Quality Analysis)

As the First Post of a new type of article here at The Game Tips And More Blog
[started due to popular demand!], I would like to explain a bit about my ‘Setting Of The Month’:
What is meant by “Of The Month” (at least at this blog), is less ‘lunar syzygy’ and more ‘what is currently being served’, in concept. Every once in a while I will post what Recording Settings or Rendering Settings I am currently using. I want to begin doing these posts in response to two things:

  • It was requested by you readers! Over the first half of the year, I run a Poll here at the Blog (it is located on the top right panel area) and currently, the single most popular Requested Topic For Future Posts is “Tips and Tricks of Video Capturing and Editing”. Therefore, as part of answering that call ‘by popular demand’, by my respected readers, I want to share as a ‘Tip’ what settings I have been using of late to capture – not to tell you ‘what to use’, but to simply give everyone a suggestion – perhaps even a place to start from, when recording or editing their gameplay adventures.
  • I see ‘settings’ asked about a lot, everywhere. Whether it is in game forums, technical forums, video editing and recording application forums, or even in my Inbox once in a while, people are constantly asking what settings to use, or “what settings do you use” – and that’s great! I’m glad to see helpful replies of others (and sometimes short explanations on how someone is using a specific setting and why). As anyone who has asked me directly knows, I enjoy helping others with suggestions on settings and usually try to explain why I am using one setting over another.
And so, here is the first edition of a new addition to this blog, without further adieu:

 

This Month’s Featured Setting

Bandicam’s Xvid Codec

For the past little while, I have been messing with the Xvid codec – not the ‘official’ one from XviD.org that you have to download – the one that is built-in to Bandicam, easily available via pull-down menu in the Format area, where you choose which codec you want to record with. As of the most recent version of Bandicam [at the time of this post], Xvid is now the Default Codec that is pre-selected, when you install/startup Bandicam. Where in previous versions, a ‘Bandisoft-optimized’ MPEG-1 codec was the Default, now a ‘Bandisoft-optimized’ version of Xvid is thrust into the limelight – and I wanted to test this puppy out and see what tricks it can do!

If you’ve were computing through the 1990’s, you may have heard about the Xvid codec. A competitor to the DivX codec around the turn of the millennium, I am actually going to skip over the history of the Xvid codec [other than this one paragraph]. Parts of such history may actually be a ‘dark affair’ (depending on who you talk to), worthy of it’s own short documentary, as the DivX vs XviD history has some aspects in common to the history of other products and companies that were popular over time [with Saturday Night Television Specials such as “Apple vs Microsoft”, “Xerox vs Apple” and more..]. As with many companies and products in popular use today, they all have “Origin Stories” that you won’t find on The Internet and never will… And Now, Back To Your Regularly Scheduled Program

The Xvid codec is a version of MPEG-4 (it is MPEG-4 Part 2 or “H.263/ASP”), so it is directly related to it’s younger-but-bigger brother, AVC (which is MPEG-4 Part 10 or “H.264/AVC”). As such, Xvid [ASP] does not have many of the functions that are found in H.264 [AVC], such as Deblocking, where the codec will try to ‘hide’ some compression artifacts that occur due to over-compression; but Xvid is still a great codec to record with, it’s main strength being speed. Because it doesn’t have many of the processing functions of it’s more recent and bulkier MPEG-4 versions, it can ‘figure out a frame and save it to a file’ very quickly – which is essentially what is happening, technically, when game recording.

Recording with Bandicam’s Default settings for their implementation of Xvid [designated herein as “Xvid(b)”**, to show that it is the “Bandicam-Optimized Version of Xvid”] will give you a Quality Setting of 80%. The capturing framerate, by Default, is set at 30 fps (Frames-Per-Second). The audio format, in this Default setting, is compressed “MPEG-1 Layer 2” format (MP2) for the Audio. Here is a screenshot showing what all of Bandicam’s Default settings, for their implementation of Xvid, looks like in one image:

The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Default Settings)
Click to see Full Size

Below, are a sampling of a handful of games and the framerate performance hits that were seen while recording with these Default Xvid(b) settings (i.e. the differences between ‘playing the game and not recording’ versus ‘playing the game and recording at the same time’):
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }

Recorded Game Title                     Resolution      Performance Hit (Δ)
Hitman: Absolution Benchmark 1366×768 ~ 2 fps
Hitman: Absolution Benchmark 2560×1440 ~ 4 fps
FurMark (Full Run) 1366×768 ~ 2 fps
FurMark (Full Run) 2560×1440 ~ 0 fps
Unigine Valley Benchmark 1366×768 ~ 6 fps
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 4 fps
Batman: Arkham City Benchmark 2560×1440 ~ 9 fps
Skyrim (Introduction) 1366×768 ~ 0-8 fps
Skyrim (Introduction) 2560×1440
Minecraft 1366×768 ~ 0 fps
Minecraft 2560×1440 ~ 0 fps

table code created by Danny Sanchez (journalistopia.com)

As you can see in the table above, the difference in framerate between ‘Playing’ and ‘Playing While Recording’ is very minimal [the performance ‘drain’ being accentuated in higher resolutions for most games]. Although only a handful of games were tested, I did try testing both spectra of resolutions possibly in use by the average gamer today, by recording with an ‘enthusiast’ resolution (2K/1440p) as well as a commonly-run laptop/notebook resolution (1366×768) which could also be run by older or less-capable systems. Bandicam’s optimized Xvid performs very well in the tests, with almost as low of a performance change as the ‘super-light-performance-hitting’ MJPEG codec.

Like MJPEG however, Xvid’s weakness is the lack of tools to compensate for compression. Again, I mention here the MPEG-4/AVC ability to somewhat ‘hide’ compression artifacts, with code for utilities such as “Deblocking” built into the codec, where the edges of areas that the codec is making its calculations in are ‘softened’, so that the ‘blocky’ effect of high compression (called Macroblocking) is less visible. In Xvid, there is no such utility, so if too high a compression level is attempted [too low a bitrate is stipulated], then these ‘block’ artifacts can easily be seen, especially in ‘flatter’ areas of a frame (portions of the screen with less color and/or changes happening), as seen in the below frames, extractions from the actual recorded video frames themselves:

[In the examples below, when the compression artifacts aren’t as obvious, I will show the entire screenshot in compressed JPG format, then underneath I ‘zoom in’ to show the compression artifacts from the codec as magnified extractions from the original video frames, in BMP (BitMaP) format. I use sampled areas for that, as full 1440p Screenshots in an uncompressed format would be over 10MB each]

Xvid(b)** at 90% Quality [altered from Default 80% Quality Setting], Battlefield 3.
Click to see Full Size
The result when recording at 90% Quality (up from the Default of 80%) was very satisfactory, with only ‘nit-pickable’ parts to show the codec’s weaknesses, like the Upper Left area of this scene above (with the dark interior areas). Some artifacting can also be seen in the Middle Top area (slightly obvious even in this compressed JPG), where the plain sky areas take the brunt of the compression of this frame taken from the original game recording video produced by Bandicam.

Xvid(b)** at Bandicam’s Default of 80% Quality, Battlefield 3.
Click to see Full Size
The above image is taken from a game recording of Battlefield 3 that had some pistol action going on, with an explosion caught in the background. The quality of Bandicam’s Default setting isn’t too bad and high action scenes can actually look quite acceptable. For example, in this frame above, with the explosion occurring on an upper walkway, only the Right Edge of the explosion (with the debris) has obvious Macroblocking – and the sidewalk [and foliage] macroblocks had to be ‘looked for’ here – and are less noticeable in the moving video. The ‘flatter area’ (with less colour variations) in this scene, is the poster advertisement, which the codec punishes with compression, leaving colour banding and macroblocks evident. The rest of scene is more complicated material and demands the codec to utilize more bitrate, ending up looking not too bad at all, when VBR is used (Variable BitRate, “changing data rate”) mode).

[I personally found that in dark (as in nighttime) scenes, at 80% Quality there was distracting colour quantization (colour quality loss) and macroblocks (little square compression artifacts); but for most material, the 80% Quality setting seems ok to use for Xvid(b)**, most of the time]

Xvid(b)** at Bandicam’s Default setting for Xvid of 80% Quality, the Batman: Arkham City Benchmark.
Click to see Full Size
The above image is an extracted frame from a recording of the Batman: Arkham City Benchmark. A very difficult scene for any codec (unless you tell it to ‘keep all quality, use 100%’ and then don’t mind the larger file size that will be created) it is hard for a codec to decide what to compress and what not to, as particles fly all over the place and light and dark areas shift around as the Benchmark runs through this area with changing levels/regions of Luma [lightness, brightness]. Bandicam’s Xvid did a good job trying to keep the text sharp at 1440p – but at 80% Quality, macroblocks are everywhere (those present in the screenshot above are not from the JPG compression, they were present in the game recording itself). At 80% Quality, anything with subtle gradient colour changes are absolutely tortured by the codec, seen especially in the change from light to dark in the Center Top light fixture area and the Left Lower curtain region. Bright areas however, such as the light fixtures themselves and almost all of the particles flying around, are judged by the codec to be ‘important to human eyes’ and detail is kept high for those objects.

Xvid(b)** at Bandicam’s Default setting of 80% Quality, Minecraft.
Click to see Full Size
The above frame is taken from a recording of the Minecraft Demo starting shoreline, originally captured at 1440p (the image is resized down to 1280×720). I was interested in how Xvid would handle Minecraft, a difficult game to capture and compress, as hard edges and lines are everywhere. Bandicam’s version of Xvid did surprisingly well, as the video recording itself is a joy to watch, with compression artifacts barely noticeable (recording at higher resolutions helps with that, but uses more disk space for the game recordings). Magnification of the original video frame is just below (next image):

These two sampled regions are magnified to 200% (doubled in size). They were extracted from the game recording frame above, which itself came from the original game recording produced by Bandicam and the built-in Xvid codec.
Click to see Full Size
While not as obvious in the moving video, the above frame extractions (both Left and Right sides) show Gibbs Effects [‘ringing’ or ‘mosquito noise’] around the hard edges of Minecraft’s graphics. The colour gradient changes, blending slowly into the background/sky colour in the Right Half of the above image also cause Ringing and Macroblocks to occur. Distant water gets treated with extreme prejudice by the codec, as the jumble of lines and animation from the textures are ‘sluffed together’ [my technical term] and Macroblocks are obvious. Again, these artifacts are more obvious in the stills from the game recording – the video itself, when watched, was more appealing to the eye and these compression artifacts aren’t as noticed as the frames fly by and the cow looks at you in a wondering manner.

Regardless of some of Xvid’s compression shortcomings illustrated above, with the speed that it performs at, along with the ability to turn up the Quality setting in Bandicam, these artifacts shown will not occur as often in higher quality settings – and then Xvid can be a nice codec to run with, especially if a system cannot handle a codec that does higher processing on the frames [taking more time to do calculations on them and saving them to a file, creating ‘lag’]. Older systems or laptops that do not have the hardware to utilize GPU-accelerated game recording (with codecs such as NVIDIA’s CUDA and NVENC, AMD’s App Acceleration and Intel’s Quick Sync) can utilize Xvid as a less-taxing codec to record with [as another option on the Utility Belt of Game Recording Codecs to choose from]. Indeed, it is almost as speed efficient as the ever-compatible MJPEG codec, for capturing, editing and compression.

The default setting, when installing Bandicam, creates a GOP of 150 [GOP stands for Group Of Pictures or the number of frames between Information/Key Frames in a video]. This is fine for normal viewing (and it leaves a lot of headroom for compressing ‘only the differences’ between the frames, resulting in smaller filesizes), but a large GOP can create problems with editing, as many NLE’s (Non-Linear Editors, such as Sony’s Vegas/MovieStudio line, Adobe’s Premiere products, Lightworks and more) do not work well with so many frames in-between the Keyframes – however, editors such as Corel’s VideoStudio, CyberLink’s PowerDirector and Microsoft’s own Movie Maker do not exhibit this issue [I tested these three applications by hand, myself, just to make sure and they imported fine and were handled without the “glitchy-ness” or “trails” that were exhibited in (for example) Vegas].

Although originally captured for an article on the Xvid codec here (which can potentially also experience the issue mentioned in the above paragraph) this image shows an example of what the “trails” or “glitchy-ness” will look like, as it was captured from a video with a Large GOP (large keyframe interval) output produced by Vegas. (Click to see Full Size)

When editing a video with a large GOP, the video editing application must ‘seek’ to the next Keyframe whenever it has to process a request and calculate/build all of the frames from there (which slows things down and delays processing and editing). Also, depending on the application, with some programs video can only be ‘cut’ on keyframes (unless an application is coded to create keyframes where needed). All of these steps and problems created by ‘Long-GOP’ video can be avoided [when using the above-mentioned video editing programs] by simply adjusting the Keyframe Interval in the Xvid settings to “1”.

One caveat to keep in mind, with setting a Keyframe Interval of “1”: although it will now make for speedy/easier/morecompatible editing with many video editing applications, the codec will not have as much ‘headroom’ to work with, when compressing your game recording material. 
What this means is, that instead of only keeping track of the changes between frames (say, a person running by down the side of the screen), where the codec will literally only save those ‘differences’ in the file; it now has to save every single portion of the viewable screen in every single frame, complete and independent in ‘stand-alone’ frames (the KeyFrames), and while the video will be much faster in seeking and have increased editing compatibility, the codec requires much more bitrate now, to save ‘everything’ in every single frame.
The result: your video file size will end up larger than before. However, you can now edit the video in Vegas, Premiere, Lightworks and more… the choice of how to go about this aspect then, is up to you [whether to use a GOP of 1 for easier editing, or not]. If you do not use these specific video editing programs (perhaps instead, you are using PowerDirector or VideoStudio Pro or Movie Maker, which to not have as much trouble with ‘Long-GOP’ material, not needing the GOP to be one frame) or you are not having problems with whatever editor you are currently using, there is no need to make this change to the Xvid recording settings in Bandicam [this is why there is no green indicator arrow in my ‘Suggested Settings’ illustration coming up in a little while, for this option]
Staying on the topic of Bitrate [from the above paragraph] for a moment, “..what kind of file sizes are we looking at..?”, you might ask. Well, here is a sampling of some of the Bitrates that were seen when recording with Xvid(b)** at Bandicam’s Default Settings for the codec:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px; } .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc; } .tableizer-table th { background-color: #104E8B; color: #FFF; font-weight: bold; }
Recorded Game Title                    Resolution     BitRate (Mbps, GBph) 
Hitman: Absolution Benchmark 1366×768 ~ 34 Mbps, 0.97GB/hour
Hitman: Absolution Benchmark 2560×1440 ~ 83 Mbps, 2.4GB/hour
FurMark (Full Run) 1366×768 ~ 44 Mbps, 1.2GB/hour
FurMark (Full Run) 2560×1440 ~ 45 Mbps, 1.2GB/hour
Unigine Valley Benchmark 1366×768 ~ 37 Mbps, 1.06GB/hour
Unigine Valley Benchmark 2560×1440
Batman: Arkham City Benchmark 1366×768 ~ 20 Mbps, 0.57GB/hour
Batman: Arkham City Benchmark 2560×1440 ~ 54 Mbps, 1.5GB/hour
table code created by Danny Sanchez (journalistopia.com)
Just to compare some file sizes of other codecs: the Low Quality setting for the Dxtory codec (with Compression) recorded a run of the Unigine Valley Benchmark (at 1080p) at about 326Mbps (9.3GB/hour), while FRAPS produced a recording of about 291Mbps (8.3GB/hour), with Lagarith (in Default/RGB Mode) creating a recording of the same material that ran at about 235Mbps (6.7GB/hour). Of course, bitrates fluctuate, depending on the complexity of the material (more movement/action/etc, which requires more bitrate to properly represent the material.. but a longer explanation of that is outside the scope of this post [believe it or not…I’m trying to keep them ‘short’! hah]).
The other setting that can be changed in the Bandicam interface for their version of the Xvid codec, is the Quality. Here is an example of the differences in quality output at the various Quality settings for Bandicam’s Xvid:
Comparison between varying Quality settings, for Bandicam’s version of Xvid (from Left to Right; Quality at 40%, 60%, 80% and 100% Quality). The JPG compression used for this composite [the four videos side-by-side] did not overly affect the Macroblocking occurring – the ‘blockyness’ seen in these frames is almost untouched, even though the videos from the original Unigine Valley Benchmark recordings were converted into this JPEG image – this is very close to how it looked in the video (although slightly more noticeable as still images). Click to see Full Size
As you can see, the perceived quality for Xvid goes down quickly, with Macroblocks becoming more obvious as the quality setting goes down. However, acceptable Quality can be maintained if the quality setting is kept high [in my opinion, stay at 90% or higher if you can]. Remember though, that with the higher quality settings, more space will be required by the codec, to save all of that data. Also, if using a Keyframe Interval of “1” (creating a GOP size of one frame, each frame in the video then being a Keyframe), the codec will also not have as much room to compress the images/video and your output size will increase. As stated above though, the benefit of using a Keyframe Interval of “1” is, then your game recordings will be easily importable/editable in NLEs like Premiere, Vegas, Lightworks, etc – if you are are having troubles with those specific applications [if you are not, there is no need to limit the GOP to one frame, which is why there is no green arrow indicator in the below illustration]. Below, are my Suggested Settings then, for this codec in Bandicam, in one image:
The ‘Setting Of The Month’: Bandicam’s Version of Xvid, included with Bandicam (Suggested Settings):
Quality is at 90%, PCM (“Uncompressed”) Audio is selected [mainly for editing compatibility], a higher compression (“Smaller file Size” option) is chosen (and a Keyframe interval of “1” is suggested for compatibility with editing applications such as Vegas, Premiere, Lightworks, etc. if required [only change if needed as it increases file size, no green arrow indicator is shown on the Keyframe Interval])
Click to see Full Size

Overall, I think ‘Bandisoft’s version of Xvid’ in Bandicam does a decent job with Quality – and is downright excellent where Performance is concerned. On my system (and hopefully yours), Bandicam’s Xvid had very little drain on the performance of the game while recording with it, creating very little ‘lag’ while recording (it had a low ‘performance hit’). As long as the quality setting is kept high (90-100%), the recorded output Quality can be quite acceptable, with only a little Macroblocking (block shapes being visible) and Posterization [colour quantization, which is a reduction in the amount of colours, resulting in ‘colour banding’ or ‘bands’ seen] in the darker and ‘flatter’ areas of a frame in a game recording (Macroblocking may occur in areas such as skies, less-colourful regions, etc). Try out some recordings with Bandicam’s version of Xvid for yourself and see if you prefer using it for recording your gaming adventures.
Please note dear reader, that I am not saying “this codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – use what you prefer. 



See you in the games!


Personal Short Version/Opinion:


While the Bandisoft-optimized version of Xvid included in Bandicam works pretty well and is fast, I find myself not using it very often, other than this past month or so, for testing. After recording for a while with Xvid’s ‘successor’, h.264/AVC, the extra features of Deblocking and other tools in AVC have ‘spoiled’ me. Going back to the slightly more ‘blocky’ output of Xvid – even though it creates very little lag when recording – is slightly distracting to my eyes. When I see an Xvid game capture of mine now, my eyes are instantly drawn to the darker/flatter areas of the scene and those little tiny block shapes…and I sigh at the slowly-aging Xvid codec, remembering its’ heyday’ of compressing my TV shows recorded on my ATi TV Wonder PCI card. The late 1990’s and the 2000’s were ‘Xvid’s Time’ to me, when I used it for almost everything – and while it performs well in game recording today (even Xvid.org’s ‘Official’ version, with the right settings), I am now just too used to the benefits of more modern codecs, like h.264/AVC, which can even use the videocard/hardware, for GPU-accelerated recording.

I realize there are a lot of people gaming on laptops out there, and not everyone has a dedicated/separate videocard inside their system to record with, but the more I use my GPU to record with, the more I am impressed with the performance when recording most games [note that some games ‘don’t like’ GPU-accelerated recording (are not fully coded for compatibility with it) and these games have large hits to performance with it]. At the moment of this writing, I have two NVIDIA videocards running in my system (performing together in SLI mode) and I am enjoying using the GPU-accelerated CUDA offering in Bandicam to record with. Like AMD’s AppAcceleration and INTEL’s QuickSync, CUDA utilizes H.264/AVC through the hardware to record, having high performance [for most games] and producing nice output, utilizing some of the newer aspects of MPEG-4 (such as Deblocking) when recording, to hide compression artifacts [the little ‘glitches’ from compressing the video]. The speed, and presence of light ‘compression correction’ from this hardware implementation of MPEG4 has spoiled me now, and I am finding it hard to go back to the slightly more obvious artifacting in ‘older’ codecs, such as MPEG-1 or Xvid (which is ‘older’ MPEG-4), especially when those codecs are used at lower quality settings, to try and save hard drive space. (Turning up the Quality settings for these codecs helps a lot, if your system can handle it)

As CPU architecture evolves and modern CPUs have ‘mini-GPUs’ built into them, the differentiation of capability between ‘gaming rigs’ and ‘gaming laptops’ blurs [as far as game recording goes], as GPU-accelerated game recording is possible now by less and less expensive hardware (AMD APUs) and processors (INTEL’s QuickSync), even within laptops [as opposed to full desktop systems]. This means that “gaming laptops” now have much more capability when it comes to game recording, today. If your laptop is capable of using GPU-accelerated recording, give it a try. If it is not, systems that do not use the GPU to compress their video can still perform well recording games, as is shown with the above article, by using Xvid. “If you can’t choose the H.264 encoder in Bandicam, choose ‘Xvid'” ~ Quote from the Bandicam.com website.

Do some testing of your own dear reader – and have fun experimenting, finding a codec that you will eventually prefer to record with – and See You In The Games…
Last Remarks (in addition/continuation to the Prologue of this article): 
Another thing to keep in mind is, that my settings (both for Recording and Editing/Rendering) change slightly over time… I may have been able to purchase a new disk drive recently for instance, so then I will allow my recordings to take up more space [for a while anyway]. I may be trying out a Demo/Trial of a new version of a Video Editing Application, so I have been experimenting with some different Rendering settings. Perhaps a videocard driver or codec was updated, so now I will experiment a bit with the recording application settings, seeing if I can squeeze a little more Quality out of my recordings, while keeping the Performance high. All of these reasons and a few more, are why my settings constantly change over time. Don’t worry, I’ll try to remember to come here and share them with you, anytime I find a “Good Combination” that works well for either High Quality or Fast Performance, the ‘Holy Grail’ of course being a Perfect balance of both. 
As I have begun more dedicated testing over the past few years, I have found that specific games themselves ‘prefer’ certain recording and rendering settings over others. What I mean by “prefer” is: as new game rendering engines are written, hardware architectures change, and programmers utilize ‘something over another’ in general during a game’s development, this affects what settings a game ‘works better with’, whether it is a specific game recording program, hardware/GPU, or specific recording and rendering settings; hence my usage of the word “prefer”. 
This is why, for example, some games will perform better on an AMD/ATi-based videocard in Benchmarks and Reviews than an NVIDIA-based GPU – and then other games will have better results on an NVIDIA-based videocard over an AMD/ATi-based GPU – those games were simply being developed [the programmers wrote the code] on a system with that certain GPU installed in it at the time. This also means there is a chance of specific optimizations in programming that slightly favour one brand of GPU over another [and they may even have been ‘compensated for their efforts’ by that respective company, but *shhh* these things aren’t spoken of outside Mordor]. 
In regards to the above and game recording, I have found that some games will have better performance with different game recording applications as well. For example, one game may have less of a performance hit while recording with Dxtory and then another game will have better performance recording with Bandicam [as an example] – it all depends on the code and how it is written and being rendered. That’s why I ‘change it up’ so often, altering my recording settings (and rendering settings) as each game I play exposes its nuances. That’s what I mean if I ever say a game ‘seems to prefer’ recording with one game recording program over another. 
Keep this all of the above in mind then and also remember dear reader, that I am never telling you “you should use this”, I am always suggesting only a possibility in my posts, and it is always up to you to try it out and decide if you want to use a recommendation of mine or not.
 [I encourage everyone to always take the good ideas from others and leave the bad, making up a composite of their own liking and preferences and what they want to utilize – whether it is with game recording and editing, or Life In General – but, that last part is for another blog…] 

 **[designated as “Xvid(b)”, to show that it is the “Bandicam-Optimized Version of Xvid”]

Health Concern: FAT?

The term “fat” includes fats from meat, fish, poultry, and dairy products as well as vegetable oils and the nuts, seeds, and grains from which they have been extracted. There are two basic kinds of fats—saturated, occurring mostly in animal foods (although some vegetable fats such as the kind that coconut contains fall into this category too), and unsaturated, in the form of vegetable oils such as safflower, corn, and sunflower, and in seeds and nuts. Fish tends to contain more unsaturated than saturated fats, meat more saturated than unsaturated.

Whether saturated or unsaturated, all the fats you eat rapidly form a film around blood cells and platelets, creating a kind of sludge which causes them to stick together. This clumping significantly interferes with circulation by clogging blood vessels and even temporarily closing down small capillaries. As a result, your cells do not receive all the oxygen and nutrients they need to function efficiently. They only run at about 80 percent capacity. This interferes with cell metabolism as well as with the efficient elimination of cellular and tissue wastes.

Diet Start

The chemical structure of an unsaturated fatty acid differs from its saturated brother in that at least two of the carbon atoms in its formula are free. This means that they have no hydrogen atoms attached to them, as the molecule of a saturated fatty acid does. It was long thought that while saturated fats were bad for you, unsaturated fats were good. For unsaturated fats have been shown to reduce cholesterol levels in the blood, and therefore were believed to be helpful in preventing arteriosclerosis and coronary heart disease. That is the reason we have been encouraged in the last thirty years or so to include plenty of polyunsaturates in our diet by switching from butter to margarine and vegetable oils. The catch is that although unsaturates do this, like all fats they still raise triglyceride levels (another factor linked with coronary heart disease) and they also create the same clumping as the saturated fats do, which leads to tissue anoxia.

Women have also lately been encouraged by poorly informed writers to include lots of polyunsaturates in their diet for their beauty’s sake. Unsaturated fatty acids are an important constituent of skin and muscle tissue and so it was thought, quite wrongly, that we need more of them. For what we have not been told is that the chemical structure of unsaturated fats with their free carbon atoms makes them extremely unstable compounds, and that when an unsaturated fat is exposed even to the smallest trace of a catalytic agent it begins a process of autooxidation which results in the fat molecule’s breaking down to produce what are known as free radicals.

Free radicals are highly reactive particles which, if left unchecked in the presence of oxygen molecules, will form toxic peroxides. These peroxides can damage and destroy cells. They have also been implicated as a primary cause of the aging process itself. When a cell, or the genetic material of a cell, is destroyed by free radicals, the result is something known as a lipofuscin pigment granule—often referred to by biochemists as a “clinker.” With age, ever more cells are damaged or destroyed as tissue degenerates, leading to increase in the number of these pigment granules. This is something you want to avoid in every way you can if you don’t want to look and be old before your time.

To some extent, the presence of sufficient amounts of an antioxidant such as vitamin E in the system may prevent this from happening, because it minimizes the damage done by free radical chain reactions by breaking the chain. Vitamin E, like other antioxidants, helps block the oxidation that turns fatty acids into harmful peroxides. The more unsaturated fatty acids in your diet, the greater will be your need for the vitamin.

An interesting dietary survey that was done at the University of California at Irvine looked at over 1,000 patients and examined the degree of wrinkling and crow’s-feet, frown lines, and other indications of skin degeneration such as damage to the collagen and elastin fibers and the irregular pigmentation characteristic of old skin. The subjects ranged in age from seventeen to eighty-one and 76 percent of them were women. Cadvan Griffiths, M.D., the professor of surgery who carried out the study, discovered that there is an undeniable link between marked clinical signs of aging and the intake of unsaturated fats in one’s diet. Those who regularly and frequently included polyunsaturated fats and oils in their diet had marked signs of premature aging. Some looked as much as twenty years older than they were. Very few of those who had made no special effort to eat more polyunsaturates showed any clinical signs of premature aging. Evidence is also accumulating that links free radical reactions to the etiology of cancer, senility, atherosclerosis and hypertension—all of them disorders generally associated with aging. This is all the more reason to limit the amount of every kind of fat you eat to no more than you actually need.

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

Good ideas that we can see these concrete houses the Netherlands have been totally inspired and inspiring call to us to try. Most of the ideas that we can see the space was not available outside of this house. concrete material, which come from the use of brick and stone was looking for a huge ornate and extraordinary. We can try to come to our ideas to make this house looking for a pleasant as well as ourselves and our families.

The concept of an interior provides ample room to combine the ideas. Integration space that stands between the living room, dining room and kitchen area is desirable for those who like social live and love to watch their children. These applications are rustic room in search of other great ideas that make us who see this house completely. The decorations of great gold bathroom also feel comfortable. Honestly, the more attractive space in this house was the place of these decorations ideas outdoor dining. Designed by Arjen Reas

NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS
NETHERLANDS CALM OUTDOOR DINING ROOM IDEAS

HOME DESIGN FULL OF COLOR AND INSPIRING

It was probably what the designers had in mind when you fill this place with colorful decoration items such as floor cushions, rugs and rustic small packages. Because the white background, these elements stand out and create a pleasant visual contrast. The living room, dining room and kitchen are connected not only physically, but also intelligent design. We love the way the house seems to be decorated according to a fun pattern, which consists of color and youth.

Home Design Full of Color and Inspiring

Home Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Living Room Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Kitchen Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bedroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

Home Bathroom Design Full of Color and Inspiring

My Trip to New Delhi & Hyderabad Cont…….

Today I finished the 2nd organizational capacity assessment of research organizations. I must say that I was impressed with this organization in terms of its outputs. I was equally impressed as to how they have been able to manage the organization with limited resources.

On the way to the organization today I was able to take a photograph of the 3 wheeler which was kitted out as a tipper and used for garbage collection. Here it is.

Georgia Bloggers Blog Hop

It’s time to teach the country about yes ma’am and ya’ll.
Down here in Georgia, we talk with a drawl.
We’re bringing you some freebies as sweet as our tea.
Enter our contest, you might get some things free!


I moved to the Atlanta area eight years ago when my husband decided to go to law school at Emory. It didn’t take long for us to decide that we’d say goodbye to the cold Michigan winters and make Georgia our permanent home. 


We eventually settled in Decatur, a quaint suburb of Atlanta, and we love our little town. Decatur has more festivals than any town I know, and we have a thriving downtown with local shops, concerts, and amazing restaurants. We’re minutes from downtown Atlanta, but we’ve somehow captured a small town feel, and I love it. 

Image of Concerts on the Square in Decatur via visitdecaturga.wordpress.com

This weekend, we’ve paused from our peach picking to give you a taste of Georgia. Twenty-five teachers invite you to take a road trip through our southern state. Hop through our blogs to get freebies.
                                          
This weekend only, I’m giving away my Standards for Mathematical Practice posters from TpT for FREE! You can pick up mine just by clicking here. 



My entire TpT store will also be 20% off this weekend only — June 20-22, so check it out! 

We’d also like to give you a chance to win a bushel basket full of our products. To enter from my page, you just need to follow my blog on Bloglovin’. Already do that? I’d also love for you to follow by email in the link at the top! You can enter once from each person’s blog.

a Rafflecopter giveaway

a Rafflecopter giveaway

So what are you waiting for?! Time’s a wastin’. Go get more free stuff and sign up to win!

An InLinkz Link-up

ever worry about what happens to your car when you drop it off at the dealership? Worry no more. Leave your cell phone in the car, with the camera on, or put in a Go Pro, or dash cam

Seriously, last week some customer did this at the dealership I work at, he wanted to bust the guys who detail the inside of the cars

http://tywkiwdbi.blogspot.com/

Limitations of Organization Capacity Assessment (OCA) tools

Since April of 2002 I have been involved with Strategic Planning, Restructuring, Re-engineering, Organization Revival, Organization Analysis, Organization Capacity Assessment and Organization Development projects across sectors and boarders. Most of the tools that ate used for this purpose can be traced back to a few general tools which were made famous in the latter part of the twentieth century. Increasingly I have felt the need to further customize these tools in a way that they become more relevant to the current context. This customization has been happening in the past and continues at a faster rate at present.

The single biggest reason that I attribute for this need is that; today we live in a technological age which has some peculiar characteristics. The characteristics are that we need to innovate and improve not only our products but also how we do things inside the organization at a faster rate. This is nothing new; most of the thought leaders of our time have made big bucks selling this message repackaged with additional jargon. These characteristics currently affect most of the knowledge based industries. However as time goes by their affect on every organization be it government, private or development sector will grow exponentially.

As mentioned above since we have to improve the way we do things inside an organization we run into the human dimension of things. We are also aware of the “change management” that needs to happen inside the organization to facilitate the “keeping up” with the changes that drive our organizations toward bigger and better things. However we don not consider that some of the changes required may be limited by the knowledge / intellectual capacity of the staff (here staff include owner directors, CEOs, CFOs, CIOs, and CKOs). In some organizations we may have staff that has reached the limit of their intellectual prowess. When an organization reaches this level it is said to have arrived at the door step of “mediocracy”

The current tools that most of our contemporary consultants use for organizational diagnosis will not help identify this issue of “mediocracy”. However there are some characteristics that are peculiar to these organizations where they have reached the glass ceiling of intellectual limitation / mediocracy. Let me take a few cases from assignment that I have done in the past and elaborate this.

The 1st example that I would like to take is an ICT company that started over 25 years ago. The organization has been fairly successful in keeping up with the changes in the ICT technology; and has been making above industry average, earnings per share. However in the early 21st century there was a need to re-strategize to keep up with the faster pace of change in the ICT technological environment. I was invited to develop a new strategic plan for this organization. By this time I had already identified some of the key markers of an organization that has reached its pinnacle based on the intellectual capacity of its staff; and I was able to identify them in this organization during my first meeting with the senior management of the organization. I suggested to the Managing Director who invited me that the organization not only needed a new strategic plan but it also needed a corporate renewal plan and a VRS. This suggestion was not looked at favorably and I was asked only to develop a strategic plan.

The markers that I identified were:

1. The organization starts adding parallel value chains to the existing organization structure.

2. Organization does not move forward or backwards in the value chain

3. The organization does not spawn new businesses that are “stars” / neither are they known for any innovation (other than the innovation of some of the principles / 3rd party brands that they may represent)

4. History of young star performers leaving the organization on a continuing basis

5. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.

6. Long serving staff in a particular discipline / technology / expertise

7. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise

8. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles

9. Large number of managers based on technical areas as opposed to value addition

10. Staff do not take up higher education or professional development

11. Average age of staff moves parallel to the age of the organization

The above 11 markers as identified by me is a clear indication that the organization has run out of ideas and the incumbent staff are not able to get the organization out of the hole that it has dug for itself. They need fresh blood and a new playing field to continue being profitable. In its current state it will just survive but never reach its former glory / heyday it enjoyed in the beginning of its existence.

The 2nd example that I would like to take is a research organization set up to do applied economic research. This organization too has been in existence for over 30 years and had enjoyed considerable success in the early part of its existence. This organization too displayed the following common markers as identified by me earlier.

They were:

  1. Long serving staff in a particular discipline / technology / expertise
  2. History of young star performers leave the organization on a continuing basis
  3. Boasting of people (the young starts) who have left the organization and gone to achieve great things as been trained at this organization.
  4. Some staff that leave the organization after a few year (not the stars) join the organization again as a manager or a senior in the same field of expertise
  5. Staff talk of the same obstacles that they face every year (one years experience repeated over many years) as opposed to innovating / re-engineering / work-a-rounds to overcome obstacles
  6. Large number of managers based on technical areas as opposed to value addition
  7. Average age of staff moves parallel to the age of the organization

In addition they displayed the following:

  1. Doing (research) work in traditional / theoretical / safe areas as opposed to doing applied / non traditional / contentious issues based research (Not competing in your space as mentioned in the mission but trying to compete in the space that you perceive to be good at / running back to mama so to speak; relying on your academic training as apposed to innovation)
  2. Contempt / arrogance towards younger organizations (doing applied research) and relying on the age of the organization and past performance as a mark of value (of research) as apposed to quality, (rigor), and relevance to current context.

The above may be considered anecdotal by some; but over the past 8 years across 19 countries I have come across these markers with increasing frequency across private, government and not for profit / development sector organizations which are not considered to be in the knowledge driven sectors.

The question is; are we at the stage that this initial varying degree of prevalence of the markers in other sector may become the norm across organizations and sectors? Only time will tell. However, I am convinced that we are seeing the beginning of another divide that will start another wave of brain drain as organizations start to realize this phenomenon and start to poach intellectual staff from all over the world.

Fallout 4: High Resolution Texture Pack (Free DLC) Is Now Available [Notification]

For those that haven’t heard yet, as mentioned last week at their site here, Bethesda has released a High Resolution Texture Pack, that is now available for free, downloadable via Steam.

The graphic ‘upgrade’ includes ‘native 1440p’ textures [which means the textures themselves are 2560×1440 pixels in size – but remember, textures usually aren’t displayed at Full Size, they are squished into say, the sides of a gun, or a sign or other things in the world – even if they cover a large wall in the game, they will usually not display ‘at full native size’ – and even if they do, they can be repeated (“tiled”) to fill in the space of objects needed, in the game world – basically, 1440p textures should make the game look great]. It also includes Enhanced Draw Distancing and God-Ray tweaks [those glow-y, streaks of light, showing up especially when a source of light is behind something, such as the sun behind trees or buildings].

Now, up until this release, I personally was playing with SweetFX a lot in FO4, having fun increasing Sharpness and Shading, dealing with the Aliasing, taking Screenshots and ‘Realistic Photos’ and ‘Close-Ups’ (with Depth-Of-Field, etc) of some of the Characters in the game. These can be found here, at a slowly-growing Flickr page I started for The Blog. A couple examples of these, taken with ‘SweetFX in ReShade’ are just below – I look forward to what the entire game could possibly look like with the new High Resolution textures!

Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size
Fallout 4 – Mrs. Nordhagen, Settler I – SweetFX in ReShade
(GTAMblog7Photo SweetFX Preset, made available Soon™)
Click to see Full Size

ReShade by Crosire (reshade.me)
SweetFX by CeeJay.dk (ceejay.dk)
Game Material by Bethesda Game Studios (bgs.bethsoft.com)
Captured by Troy from The Game Tips And More Blog

Since I don’t actually have room for it on any of the drives I have Games on at the moment [which seems to always happen when something cool comes out, of course], I will be moving some things around and uninstalling other games I am not playing at the moment, to make room for this big fella…

It is an optional/separate “DLC” download, weighing in at a hefty 58GB installation through Steam. Once I get it going, I will be working on a QualityTest for it, comparing the graphic look between the two versions and what they really look like in-game – as well as the Performance Hit the Texture Pack creates – look for that coming post Soon™ if you are waiting to see what they look like or if it is ‘worth the download’; but if you can’t wait and want to get started seeing it yourself, go get it via Steam for free now, here.

This free download, by the way, is – in Bethesda’s own words, “…a love letter to our amazing PC fans that have supported us – not just with Fallout 4, but across multiple decades and games…”. 
Right back at ya’, Beth! 
“Thank You” ~ Sincerely, The Game Tips And More Blog

Header and Footer Images captured by Bethesda, from their example screenshots of the High Resolution Texture Pack

Guided Math Resources

I recently went to a workshop about guided math groups, and I have tons of new ideas that I’ll be sharing in the coming weeks. I couldn’t wait, however, to share a couple of the resources that I’m really excited about.

First, is this book:

Good Questions: Great Ways to Differentiate Mathematics Instruction, Second Edition  is a resource that I was able to start using with my students as soon as I got it. It is full of open-ended questions and parallel tasks that students at any level could access. It’s organized both by grade levels (K-2, 3-5, 6-8) and domain strands (Number and Operations, Geometry, Measurement, Algebra, and Data Analysis and Probability). It also lists which Common Core State Standards each question aligns to.

We were working on line plots (4.MD.4) when the book first arrived. Consider these problems:

You create a line plot that is based on measuring items to the nearest quarter of an inch. You notice that your plot looks a lot like a steep mountain. What might the measurements be and what might you be measuring? Why does it make sense that your plot would look like a steep mountain? (p. 174)

We had a great class discussion about inferences we can make about data based on the shape of a line plot, and students were really creative about what the line plot could be measuring.

There was also a parallel task where students could choose how to represent the data.

The set of data below describes the ages of a group of people at a family party.

32, 30, 5, 2, 1, 62, 58, 28, 26, 25, 24, 2, 4, 39, 16. 

Choice 1: Create a line plot to display the data. 

Choice 2: Create a bar graph to display the data. (p. 186)

Some students felt more comfortable with bar graphs, but they realized that it was harder to figure out intervals and scales for the bar graph vs. a line plot. That yielded a great discussion about how to choose which type of graph to use.

This is a great resource to use for student math journals, and it’s one that I will be going to daily. I can’t recommend this resource enough.

Another math resource that I’m falling in love with for my math workshop and guided math groups comes from the Bridges in Mathematics program. Until attending the workshop, I’d never even heard of this program, but it seems like it’s well-suited for developing math centers and guided math groups. There are some sample tasks available as a free supplement to the the program (to align it with Common Core) at http://catalog.mathlearningcenter.org/free. I’m also planning to purchase their Building Computational Fluency program for $45. I need something more structured and organized for checking students’ multiplication and division fluency in the fall.

Do any of you use the Bridges in Mathematics program in your school? If so, I’d love to hear more about it — I’m really intrigued!

Have a great weekend!

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

For furniture, I love the few pieces I have and does not change, but as a blogger we discover daily news, it’s hard not to crack …

Above the living-dining room where Jo Yana chose to paint the main wall in pink – small nod to her favorite designer Karim Rashid … You’ll also notice the suspension ATOMIUM in Kundalini the most beautiful effect!

This room also houses the home theater installation conducted by Dynamic Home Cinema. In front of these gorgeous wooden drops are pregnant Y21.2 Audio Linear …

At the entrance, a picture of Miles Aldridge sets the tone of the apartment, and FIDELIO Philips broadcasts Playlist place … On the side of the dining room, chairs LOUIS GHOST EROS and greet guests.

The main hall lit by the luminaire BLOB M Karim Rashid …

The cuisine is inspired by Parisian apartment signed Périchon we mention above, because the walls and ceiling were painted in gray have to emphasize the white lacquered furniture. Yellow light under the bar and a nice bin Brabantia bring the strand of color …

We love the headboard PARROT signed by photographer Solve Sundsbo …

The workspace of blogger … A reading area with ottoman LEBLON DELIENNE-QUAD and library. An office signed K-DESIGN, and the now famous chair VERTEX signed Karim Rashid.

DYNAMIC DESIGN HOME CINEMA

DYNAMIC DESIGN HOME CINEMA

Workout Anytime in Citizen Tribune

Workout Anytime in Citizen Tribune

WORKOUT ANYTIME was recently featured in the Citizen Tribune. The article explains the newest WORKOUT ANYTIME location coming to Morristown, Tennessee this October. It gives background on Steve James and Scott Elliot and how they came about the WORKOUT ANYTIME brand. The article also goes into further detail on the services at the gym and the owners planned community outreach.
You can view the full article here. 

Beautiful Bed Room Design Sample

Beautiful Bed Room DesignBeautiful Bed Room Design

Beautiful Bed Room Design MinimalistBeautiful Bed Room Design Minimalist


Beautiful Bed Room Design ElegantBeautiful Bed Room Design Elegant


The hottest color of 2010 is Beautiful Bed Room Design which is a strong color that must be used as a complement with lighter tones so as to not overwhelm the space and to make it look classy and fun.In the pictures above you can see a beautiful turquoise interior starting with the chandelier and ending with pillows.It’s a good combination between turquoise and floral tapet from walls.

Battlefield 1 – DirectX Error “GetDeviceRemovedReason” [Workaround]

At first, because of the phrasing of the error, I thought it might be Hardware, namely my GPU (Graphics Processing Unit, the Videocard); but since that was working fine with literally, all other games – playing in longer gaming sessions even [and I know for sure that I wasn’t actually physically pulling out my videocard while playing …I think] – I omitted that possibility (for now) and focused on a potential Software approach, which meant checking configuration…

Looking at the Settings for the game then, I tried reducing everything down to the Lowest Possible Settings; to reduce the load on the GPU and the load in the processing of the game itself. (With lowered settings, there would be less data being streamed from the game, less being extracted from the compressed/encrypted files of the game, less being calculated and drawn, less everything). If there was a problem with how game data was being handled, this might being it to light [note: an issue with integrity of the files would not be detected this way, this is more of a data handling troubleshooting step; integrity of the game files can usually be checked/verified with a Repair/Verify through the game client or if that doesn’t help, a Reinstall of the game usually assures accurate game files (barring Drive/RAM file handling (Hardware) issues – which is another tangent/issue altogether, heh) – screenshot of where to run a Repair/Verify of the game files for BF1, below].

Example of the Location of where to Repair the game files in the Origin Game Client, showing Battlefield 1 in 2017
(Click to see Full Size)

Nope. Crash. Error [which I lost the clean Screenshot of, of course – but a version of it is in the Header for this posting – I will add a clear Screenshot of the error window to this post when I can capture it again, if it occurs]. Hmmm…. Since it was a DirectX error (and I am 93.33-repeating-percent-sure that I did not “remove the video card” while playing..), I tried one last thing. Instead of swapping out the GPU to try with something else (a GPU from a friend’s PC, for example), which is approaching a Hardware type issue; I tried something else: I changed the DirectX level in the game from DirectX 12 to DirectX11 [this may not have been solely ‘my idea’ – although I am sure I would have eventually arrived at it as a troubleshooting step, I looked up this error and found many, many locations and sources of others stating they have this issue and encountered this error and I may have read it somewhere, for it to have come up – merely mentioning because I just don’t want to take sole credit for something I may not have come up with entirely by myself…].

Example of where to ‘Disable DirectX 12’ and ‘Enable DirectX 11’ in the Video Settings, in Battlefield 1
[Hmm, this is more of a Workaround than a ‘Fix’ for this issue…]
(Click to see Full Size)

Success! I played a good couple of hours this way, with no crashing, closing, freezing, or errors at all – great! After trying it after re-opening the game, rebooting and playing some more, testing it the next day or two after as well, it seemed ‘solidified’; changing the DirectX level/version from 12 to 11 seemed to ‘solve’ the issue [for me, for now].

I think this is more of a ‘Workaround’ than a ‘Fix’, since it doesn’t solve the issue permanently… there is still something in the game engine or how it communicates with DirectX/Windows/theGPU, which is causing something that is not ‘fixed’ by this step; but, since it does work to get past the issue, I thought I would share, to help others that may be running into this seemingly-popular problem (‘popular’ judging from the queries I found about this issue on both the Battlelog forum and EA Support Forums, spanning a few years now..). I hope this works for you, dear reader, as it seems to have done, for me.

[Since this is not a true ‘fix’ (I do not know if this is permanent nor do I know the actual source/nature of the issue, therefore I cannot say this is a ‘fix’, imo); I will post this with the title “workaround”…]

Addendum:

Other helpful tips/steps that can possibly help, if the above step does not work (and some additional information), can be found in multiple places on the Battlefield and EA forums, such as this list by a helpful poster named STEEiL:
https://forums.battlefield.com/en-us/discussion/54605/directx-function-error-amd-getdeviceremovedreason-error-in-battlefield-1

Good Luck – I hope it gets working for you soon – and See You In The Game!

My recommendation: The 3-step dietary programme Do what I did, look the results

The dietary plans that follow offer simple, nutritious and delicious recipes on a staged regime that should take you from overweight to optimum weight and enhanced well-being.

The reason many people depend on junk and convenience foods is because they lead such busy lives. Most of the recipes in these plans are quick to prepare, and should be within the capabilities of even the most reluctant cook. There are exceptions: preparing the Chicken Soup will take a couple of hours, but it makes a lot and you can freeze separate portions, ensuring that you can have a nutritious low-carb meal even when the clock is ticking away.

So blitz your cupboards and discard any foodstuffs that don’t fit the bill. The journey to a healthy, lean body begins here.

The Plans

The 3-step programme includes 3 eating plans. The Fast-Track Plan will help you lose weight quickly and give you that all-important boost on a 50 per cent protein/20 per cent carbohydrate/30 per cent fat regime that will initiate benign dietary ketosis. It should last for 7-21 days, after which you are ready to move on to the next stage. Your weight loss should be around 2-5.5kg (4-121b) if you are a woman and 4-7.25kg (8-161b) if you are a man, depending on how long you remain on this plan.

Diet Start

During the Keep on Tracking Plan you increase your levels of low-tomedium GI carbohydrates and move into a 35 per cent protein/35 per cent carbohydrate/30 per cent fat regime. You still monitor ketosis and watch how introducing higher levels of carbohydrates affects your weight loss, which should now even out to 0.25-1 kg (1/2-21b) per week.

The No Backtracking Plan is your eating regime for life. You can gradually introduce fruit and vegetables, grains and pulses from the higher GI ranges, in moderation. It is important to keep an eye on how your body reacts to these and to establish your perfect weight-management level.

If you are a vegetarian, there is plenty of advice on how to adapt the plans and recipes to suit your dietary requirements. Granted, your choice isn’t as varied as that of a non-vegetarian, but don’t use this as an excuse not to give it a go. If you follow the basic guidelines and make simple changes to the recipes where necessary, you should lose weight and eradicate insulin resistance successfully.

FOOD TO THROW OUT

  • White flour and sugar
  • Honey
  • Biscuits
  • Crisps
  • Sweets
  • Sugary drinks
  • White rice, bread, pasta
  • Processed foods high in carbohydrates
  • Ready-made sauces
  • Gravy mixes

Customize the plans to suit your lifestyle and dietary preferences

The suggested menu plans are not set in stone – they are templates to encourage you to eat the right sort and amount of food.

If you wish to change a recipe – because you don’t like lamb and would rather have chicken, say – it really doesn’t matter. Just try to use foods of a similar dietary value. When swapping vegetables and fruit, go for ones in the same GI category; try to exchange meat for meat, or fish for fish, in the same amounts. If you change a recipe from meat to fish, you may need to use slightly more fish to give you the same level of protein. For example, 125g (4oz) of poultry or lean meat should be replaced with 175g (6oz) of fish.

Simplify the recipes

If you are short of time, or like your food a bit plainer, simplify the recipe. If you don’t fancy Baked Tuna with Tomato and Herbs, adapt the ingredients, ensuring that you still have sufficient protein, carbohydrates and healthy fats – have a tuna salad with tomatoes and dark green leaves.

On a budget

If money is short and you find some of the suggested ingredients a little expensive, use some budgetary ingenuity to bring down the cost. Fresh salmon can be replaced with coley or whiting, or even tinned salmon.

Use the suggested meals as inspiration. In order to manage your weight in the future, you will have to experiment and be prepared to adapt.

Health Concern: FAT? continue…

How much Fat do you Need?

Very little. Just about any food you can think of contains some fat, and when your diet is made up of at least 75 percent vegetables, fruits, and grains with a few nuts and seeds but without added oils, fats, cheese, or butter, as in the Lifestyle Diet, about 15 percent of your calories will be in the form of fat anyway. This is all you need. The body is capable of making its own fatty acids from the foods you eat with the exception of linoleic acid, and the mere three grams you need per day is more than supplied by eating a couple of tablespoons of sunflower seeds or one small dish of oatmeal. Even leafy green vegetables such as kale or spinach contain about 10 percent of their calories in fat. It is hard to be fat-deficient. Studies of people put on very low-fat diets, even when as little as .7 percent of their calories are taken in the form of fat as linoleic acid, have shown no adverse physical or psychological effects.

Diet Start

Even official bodies have recently begun to recognize the need to reduce dietary fats for the sake of preserving health. The U.S. Senate’s Select Committee on Nutrition and Human Needs recommended in its report “Dietary Goals for the United States” a reduction of fat intake from the present 45 to 30 percent as well as a decrease in sugar consumption to 15 percent of total calories and a corresponding increase in the consumption of complex carbohydrates—the fruits, vegetables, and grains that are the foundation of the Lifestyle Diet. For long-term health and beauty, you should make an even greater reduction so that only about 15 percent of your daily calories are taken in fat.

This is in line with the Pritikin and other low-fat, low-protein diets which have recently caused great interest in both the medical profession and the general public. Pritikin recommends a diet of 80 percent complex carbohydrates, 10 percent protein and 10 percent fat. Although a radical departure from the traditional British, European, and American dietary habits, regimens like the Pritikin diet can not only substantially reduce cholesterol and triglyceride levels, high blood pressure, and high blood sugar, but can also lead to an automatic weight loss and leave people feeling and looking years younger. Such a low protein, low fat diet can also literally beautify a woman both physically and psychically.

At first such a change takes a bit of getting used to, but soon it becomes second nature and the increased vitality, slimness, and good looks it brings you in a few weeks help make it an easy way to eat permanently.

When these are broken down slowly throughout the day, they provide the pancreas with a steady flow of glucose at a rate of about two calories a minute. When you eat something sweetened with refined sugar, the glucose poured into the system (say 100 calories or more all at once) suddenly soars. So does the production of pancreatic insulin in reaction to the insult. When this insult occurs repeatedly, as it does in the usual Western diet, with its average of two pounds of sugar per person per week, the blood sugar levels become depressed, then soar, then become depressed over and over again by a pancreas made trigger happy. In many people this leads to hypoglycemia or low blood sugar, with its corresponding fatigue and mental and emotional symptoms. It can also result in diabetes and in the development of allergic reactions to foods and to petrochemicals, which have recently been linked with diverse mental disorders as well as many acute and chronic forms of illness.

Repeated eating of sugar and products containing it can also result in deficiencies in the B-complex vitamins and an imbalance in certain important minerals. And just in case you are reassuring yourself that you, after all, only eat raw sugar, you should know that one sugar is just about as bad as another. Raw sugar does contain some of the natural vitamins, minerals, and fiber that are found in the sugar beets or sugarcane from which the sugar has been taken but raw, brown, and turbinado sugars are all still highly concentrated simple sugars which create the same metabolic problems as white sugar. As such, they are potential disease-makers. The Lifestyle Diet excludes every form of refined sugar—from chocolate to jams to packaged breakfast cereals with their hidden sweetness. It does allow a little honey for sweetening muesli (two tablespoonfuls a day) plus one tablespoonful of blackstrap molasses if you want it for its nutritional value.

WTH ? How do both front tires blow up simultaneously?

for the original version, click though on the video below, which will only play on youtube itself

After a review, the team discovered a suspension arm defect led to the entire right front upright collapse, which snapped the wheel tethers and created the dramatic effect

Fallout 4 – Things The Game Doesn’t Tell You Or Explain To New Players Very Well (in Point Form) [UNDER CONSTRUCTION]

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it eventually… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there was a Steam Sale on (Welcome New Players, heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]

I’m having a ton of fun playing Fallout 4 (as I always say, ‘spending too much time Working On Settlements and ignoring the Main Storyline’) – but I wanted to share a bunch of things that I had to ‘figure out on my own’ in the game, or that I saw others had to (in forums, etc)… There is a kind of Tutorial in the first town in the game, and when you first start out some things are explained, but not much after that (there are some Instruction Screens the first time you Lockpick or Hack A Terminal). Below then, are a handful of concepts, in point form, that I wanted to share; especially for New Players, that the game doesn’t quite cover (or ‘cover enough’):

  • If it says “You lack the requirements to create this item” … and you have the requirements and Perks listed… there can actually be more Component requirements (build materials needed), you have to SCROLL DOWN on the Requirements List (labelled “Requires”) to see them
  • How to Holster your Weapon: Hold R for a moment (on PC, by Default); the same key as you have set for Reload (The game walks you through Aiming and Reloading, but does not seem to cover Holstering)

  • Weapons do not need to be Repaired in Fallout 4, but Power Armor can be damaged and need Repairing at a Power Armor Station, which can be found in Towns and Settlements, and can be Crafted in Workshop Mode as well (they require two Perks/Skills; Armorer (Rank 1) and Local Leader (Rank 2))

  • How to use the VANS Perk so that it shows the ‘Trail to Follow’: (See my article on V.A.N.S. … hold Q for a bit, then put away Pip-Boy right away with TAB and the ‘smoke trail to follow’ should be left behind)
  • You can adjust the Difficulty at any time in the game, even if it is just temporarily (such as if you are ill and can’t fight as well for a while). To change your Difficulty, bring up the Menu while playing (Escape on the PC), then go into the Settings, then into the Gameplay category, changing the Difficulty in there, from Very Easy all the way to Survival Mode (where you have to Sleep, Eat and Drink to stay alive and everything is ultra-hard to kill!). The chance for Legendary Items (and the Legendary Enemies that carry them) increases with the Difficulty – but you can also increase the chance of Legendaries by simply going further South and East, increasing the Difficulty of the Area/Mobs/etc
  • If you TRADE with Dogmeat he can carry Items like all other Companions can (he can also wear Dog Apparel, such as Dog Armor or Dog Collars, if they are found in The Wasteland)
  • You can increase how much Robot Companions can Carry, depending on what parts you build them with (need Automatron DLC to build a Robot that can be your Companion [to ‘accompany you on your Travels’]), watch the “Carry Weight” Amount as you choose parts
  • It is “ok” to Drink ‘the regular Water that is everywhere’, it will still heal you a little; it is just Irradiated and causes some Radiation Exposure. If you have a container such as an Empty Bottle or Milk Bottle, you can also fill these containers at Streams or other bodies of water, to Cook with

Don’t totally ignore Cooking (although you totally can, if you want to). Cooking various icky parts and gooey bits that you find in The Commonwealth not only heals you, most of the Recipes also give you ‘Buffs’ – temporary increases in various Stats – and things like Breathing Underwater or the ability to Carry More… Cook All The Things!

  • The RED Bar in your Health Bar (that is normally GREEN) is the level of Radiation you have acquired. It ‘takes up space’ in your Health Bar, because you cannot be “100% healthy” with Radiation Exposure (it must be removed with RadAway or by a Doctor at a Clinic (for a small fee))
  • The Water Pumps that are built at Settlements give ‘Pure Water’ from underground (it counts as “Purified Water” as it comes from underground where it has been protected/filtered from radiation by the land/ground, similar to how it would be IRL). The Water Pumps can be drunk from directly (like a Water Fountain) or the water can be bottled to drink later (if carrying empty bottles/etc); you don’t have to go all the way back to The Vault to get “Pure Water” [something I was doing in Survival Mode all the time]
  • To Build in a Settlement, go up to the Workshop Bench (always ‘mostly red’ colour, with ‘tools’ on it and usually located Centrally in the Settlement) and Activate it. If you are “Allied with the Settlement” (helping them out or have already helped them out by Completing a Mission for them) it will open Workshop Mode
  • To Scrap in Workshop Mode (to ‘break down an item/weapons/armor into Components you can use for Building Materials), look at it (drop it on the ground if you are carrying it) and hit SCRAP. Walk around a Settlement as soon as you can utilize Workshop Mode, looking for anything that you can Scrap in the area, for use as building materials. The items you Scrap all get ‘broken down’ into Components, which are the building materials themselves, the ‘things you construct other things with’ – everything being stored in the Workshop Bench itself as Inventory

You do not have to Scrap everything ‘manually’/’one at a time’. Just STORE or put Junk Items in the Workshop Inventory (‘trading with the Workshop Bench’, called “Transfer”) and when you want to Build something, the Workbench calculates if you have enough Junk Items to break down into enough Components to build with. It will show what you want to build as GREEN if you have enough estimated building materials to construct the thing you are trying to build. (You may also need certain Perks to build some things, watch the Requirements list)

  • People can ‘steal’ your Power Armor… Raiders can Steal your Power Armor if they come across it in The Wasteland, for example. Settlers can even take Weapons out of nearby Crates/Containers to use, when attacked. To avoid losing your Power Armor, take out the Fusion Core from the Power Armor (“Transfer”) when leaving it, so that it cannot be used by anyone else (it is like ‘taking the keys out of your vehicle’) [NPCs don’t seem to carry/use Fusion Cores on the Armor]. However there have been stories of cases where Settlers will take a Fusion Core out of a container in a Settlement and throw it in a nearby Power Armor Suit and run off with it to Defend the Settlement! Crazy. Although most of the time, the Settler will simply ‘get out’ of your Power Armor after the Settlement is Defended – still, take out Fusion Cores from your Power Armor when you leave it, so that noone (for the most part) can take your Power Armor and you can always find it where you left it.
  • If Items and Containers around you are ‘glowing green’ or looking like they have ‘pip-boy radar on them’, this is a result of the Highlighting from the Scrapper Perk. Any items that you ‘Tag for Searching’ for (eg. when trying to Build something and you didn’t have enough materials, you can “Tag the Components for Search”) will have this GREEN highlighting when the Pip-Boy detects you are close to an Item in the world that is made up of that type of Component (eg. Steel or Plastic).
    To turn this OFF, open the Pip-Boy and go to the Junk page in the Inventory tab, and change to component view by clicking on the Component View button at the bottom (‘C’ on PC).
    Then in this view, go through the Component types and clear the Tag For Search by doing it again on the Component type.
    Then, your ‘Highlighted view’ from the Scrapper Perk is turned off and Items and Containers will not ‘glow green’ around you anymore

  • Speaking of glowing green, unless you want your vision to be green-ish and REALLY BRIGHT every time you crouch (Sneak), don’t get Night Person Rank 2 (Perk). Although the Perk does state that you’ll get “Night Vision when you Sneak”, unless you really want to be able to see really well (and slightly green-ish) in the dark or when you Sneak, hold off on Rank 2, or watch some videos on it first, to see what it looks like. [To some, the Bonuses are worth it – and they don’t mind the way it looks – but personally, I did not like how the Night Vision worked/looked; and since Rank 2 of the Perk and the Vision are tied together (you cannot have one without the other), I personally avoid Rank 2 of the Perk, for now]
  • If you Exit the game (in any way except using ALT+F4), the game will Save your progress as an “Exit Save”. Then, when you start up the game again and Load the Exit Save, it will [should] Delete that Savegame. Note that if you try to Exit the game with the Pip-Boy up, the game cannot Save your progress when you Exit to the Main Menu or the Desktop (be careful in Survival Mode!)

  • Don’t forget to periodically see what Upgrades you can perform on your Weapons (to do more Damage) and Armor (to withstand/absorb more Damage) at Weapons Workbenches and Armor Workbenches. Some Modifications require Perks to ‘know how to do them’; check the Requirements as you go through your Weapons and Armor, to see what you need to make them better
Tip: If you are having trouble killing things, look for ways to improve your Weapons to do more Damage and your Armor to protect you from it – with Modifications at Armor and Weapon Workbenches! Also, the further South/East you go, the harder (higher level) enemies you will face. Tread slowly, go back over areas you have been, to see if anyone has ‘moved in’ and left items/money around. Stick to the ‘NW’ as long as you need to (especially in Survival Mode)…

Speaking of Killing Things, here is how to utilize the Suppressor (the Weapon Modification attachment that actually works really well in the game; but it is more ‘realistic’ than ‘silent’…).

Note: Knowing how to attach a Suppressor to your Gun requires the skill/knowledge, represented by needed the “Gun Nut” Perk of different Ranks (needing Rank 2 for attaching a Suppressor to Pistols and needing Rank 4 for attaching a Suppressor to Rifles)


Here are some Tips for shooting enemies (even groups) with a Suppressor on your gun:

– Shoot from a distance
(the Suppressor reduces sound, but is not “Silent”, just like IRL)

– Headshot for instant kills
(most of the time, aim manually to help this, as the chance to miss is always present in V.A.T.S. With good aiming, that single shot can always be spot-on)

– Stop attacking your enemies for a moment
(they will look around at first of course, but if you don’t move and don’t shoot, they will not know what the hell is going on and if you wait longer, they will eventually even stop looking “thinking it was the wind/rats/etc”)

– Repeat, killing the second enemy, and so on…

Try to remember that if you shoot too frequently, they can hear the direction (suppressors aren’t silent, just like IRL) or can see the puff of smoke or something, because they eventually figure out where you are BUT ONLY if you keep shooting when they are Cautious and looking for you. If you stop shooting when they are looking for the source of the sound/attack, you will be ok. Remember, “low and slow…”.

  • Weapon And Armor Attachments (Modifications made to Weapons and Armor at Workstations for each) can be taken off of Weapons and Armor you find and put on your own favourite pieces/items… As an example, take a ‘Weapon you found on a Raider’ to a Weapons Workbench and choose a lesser attachment/modification than what is present on the item. In this example, if you want a “Hardened Receiver” that is on a Weapon you found, choose one further ‘up’ the List of Modifications, such as a “Standard Receiver” and ‘build’ it on the Weapon you found; then you will be changing the Attachment and receive the “Hardened Receiver” Modification in the form of a small box ‘kit’ in your Inventory that you can then use on your own Weapon! Simply go back to your favourite gun at the same Weapons Workbench and see if you can put the new Weapon Mod (“the Hardened Receiver” with higher damage output) on your favourite gun
  • If people around you are glowing (looking, for example, red or green) and look like they have ‘lines through them’ as well, you may have a helmet of Power Armor that has the “Targeting HUD (Heads-Up Display)” on it as an Attachment/Modification. This effect is visible even if it is only active on a Companion’s Power Armor Helmet. Simply remove or change the Targeting HUD Modification of the Helmet at any Power Armor Station, to disable the effect.

[……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful – especially new players to the game….. Have fun with Fallout 4!]

Marathon Training Tips

As the saying goes “those who fail to plan – plan to fail.”   This is true in business and it is also true in preparing for rigorous athletic events like running a marathon.     Successful completion of a marathon is all about creating a plan based upon the goal of completing a marathon on a specific date in a specific location.
Determining Starting Point

The length of your plan will depend on your current fitness level relative to running.  So the first step is determining your current fitness level which can be done in several different ways:
If you are currently running you can get an idea of your current fitness level based on how often you run, how far you run, and your average pace when running.
If you are not currently running, then do a 12 minute run test – see here for a how to guide to perform this simple test:  https://www.brianmac.co.uk/gentest.htm
Once you know your starting point you can determine how long it will take you to prepare adequately to complete a marathon. The key is slow and steady progression of average distance per run and total weekly training miles – go too fast and you WILL get hurt!    The body needs time to adapt to the stresses of running.    A good rule of thumb is to increase your weekly mileage (and mileage per run) by no more than 10% per week.
So if you are currently running 15 miles per week you would only increase total mileage to 16.5 miles per week and if your long run was 5 miles you would increase it by half a mile.
In order to successfully complete a marathon, you need to be running somewhere between 30 and 50 miles per week with individual runs of 16 – 23 miles.  The advantage of gradually building up to a 20 – 23-mile run is that you have mental experience with running over 20 which can be very challenging the first time you do it.   That being said, placing too much emphasis on distance can result in over-training if not done carefully.
Training Mix

Assuming you have a base of running 15 or more miles per week on a consistent basis you should begin to mix up your training by including shorter, harder runs with longer slow runs and at least one interval training session per week.      
It is critical that you have a training base of steady mileage prior to increasing training intensity and beginning interval training where you will perform higher intensity intervals of quarter mile to half mile mixed with recovery periods.   
There is an entire science behind interval training and the best athletes train with a heart rate monitor all the time to precisely determine the intensity of their work intervals and how long they recover during rest intervals of slow running/jogging or walking.     This is one of the many reasons that, in an ideal world, you work with a running coach/trainer who has experience designing and working with runners to prepare for marathons and other runs.   A good coach will help plan and adjust your training based on how you progress from week to week which is essential for the best results!

Strength and Mobility Training

Running requires a lot more than just cardiovascular and muscular endurance – it requires specific strength and mobility to avoid injury and allow for optimum running technique.  Integrating a run specific strength and mobility program into your training can be a game changer and the program should include:
            A specific dynamic warm-up and foam rolling for areas of tightness and pain
Dynamic Warm-up:  http://www.active.com/running/articles/before-you-run-the-dynamic-warm-up
Foam Rolling:  http://www.runnersworld.com/foam-roller/how-to-use-a-foam-roller
Cool-down with run specific stretches – http://www.runnersworld.com/injury-prevention-recovery/5-post-race-standing-stretches-every-runner-should-do/slide/1
Strength Training Exercises for Running
It is essential to have great core and glute strength to properly stabilize the body during the impact of running to prevent injury.
It is also critical to strengthen all the muscles of the lower body including the hamstrings, calves, and intrinsic muscles of the feet.
Sample Strength Training Program for Runners:  http://www.runnersworld.com/strength-training/10-essential-strength-exercises-for-runners/slide/2
Putting it all together

If preparing for a marathon seems like a lot of work and complicated that is because IT IS!    Like running successful business assessing your starting point and setting a realistic goal with a specific plan of action is key.     Also having a coach is HIGHLY recommended to not only help you create a realistic plan and schedule but to monitor your progress and adjust your workouts and plan accordingly.  

1st I’ve seen or heard of a GM supercharger on a 1958 Corvette

Does Weighing Yourself Help You to Lose Weight?

Do weight changes translate into fat loss?
On a day to day basis a scale is an extremely poor tool for giving you information on changes in bodyfat levels which are very small.  Daily weight changes are mostly accounted for by four factors:  bowel movements, urination, starch and sugar intake, and blood volume.    Since your blood volume typically does NOT vary that much the other factors are more relevant.
Bowel Movements and Urination vary a lot between different people anywhere from 1.3lbs to 5.7lbs in a single day.    This is one of the reasons to consistently weight yourself after you wake up and go to the bathroom and before you eat or drink much.
However, the biggee when it comes to daily weight fluctuation, is usually glycogen storage levels.    Glycogen is just the storage form of glucose aka blood sugar.    All starch and sugar ultimately end up as glucose, glycogen or fat.     
For example, on the front end of a low carb diet you will show big weight loss which is almost all water because you store glucose/glycogen with water – hence the term carbo “Hydrate”.  Muscle and organs contain the highest levels of water, and this is significant because most of your bodyweight comes from muscles and organs. 
  
So daily changes in weight are NOT a good reflection in changes in bodyfat levels!
Can daily weighing help with long-term weight loss and fat loss?

In order to answer this question let’s review the scientific studies that have looked at this issue.     The recent advent of WIFI scales is allowing much more accurate weight records because prior to that people had to take the time to write down their weight each day.
In a recent WIFI scale study called the Weight Trial here were the results:
Over a six-month period, those who weighed daily lost about 13 lbs more than the control group.
Even those who weighed themselves up to five times each week lost less weight than the daily weighers.
Daily Weighers were more likely to do things like eating less food and watching less television so clearly the weighing helped by changing behaviors!
Although this study did not measure body fat, it is quite likely that the body weight loss did translate into significant fat loss.
For certain groups, daily weighing is a bad idea such as people with eating disorders and other psychological disorders including extremely low self-esteem.     In addition, daily weighing does not work for everyone.   For some people the inevitable plateaus or variations in weight loss can very frustrated and quit the whole process!

So daily weighing may be helpful for you, but it is not perfect and it does not accurately measure changes in bodyfat levels so it is important to do use some method of body composition testing to measure these changes which should be your ultimate goal!

Quick Tip: Getting ACTION, Dxtory, FRAPS and More Working With Battlefield:Hardline [Fix/Workaround]

I have been doing some Recording Tests over the past while with Mirillis’ ACTION – for those who aren’t familiar with it, ACTION is a game recording application, similar to MSI’s Afterburner, Bandicam, Playclaw and others – and I was reminded that it does not automatically “work” with Battlefield: Hardline [that is, ‘hook onto it’ or ‘detect-it-and-get-ready-to-record’]. I actually remember running into this issue during the Beta, but at the time I merely used another recording program and didn’t think much of it since. To find out more about this issue recently (since reminded of it) I dug around a bit and did a few tests, trying to find a solution and/or conditions it did work under – and wanted to share my few findings as a ‘Quick Tip’ for others, here.

Looking around, I found out that this is still an ongoing issue with Battlefield: Hardline – and before that, it was to some extent with Battlefield 4, even causing BF4 to ‘crash’ on Startup for some people. I also found out that these issues occurred not only with ACTION, but also with other similar programs, such as FRAPS and Dxtory, according to the Battlelog Forums and the main Mirillis Forum. In many places, I found the same solution stated again and again by helpful posters… So, I tried it out – and it worked perfectly! I repeated testing with it a few times – and once I was satisfied it solved the issue and was repeatable (for others to use), I wanted to share it here, with you.

Here are the steps of what to do [with a shortcut I figured out, to type it in faster/easier, near the end of this post]:

  • In the game, hit the Tilde key (“~”, which looks like a ‘squiggly’ line – the key is in the upper-left of Standard keyboards, to the left of the Number 1 and above the Tab key), which should bring down the Console. In here, you can type in commands for the game.
  • Type the following in one line:

    RenderDevice.PresentAsync 0

    (That is, “render device dot present async”, then a space, then a “zero”)

  • Hit enter and then you can close the Console by hitting the Tilde key (~) again.

That’s it!

As long as that is all you want to do in the Console (you don’t want to enter in any more commands), you can then just close it, as it is done – those are all the steps to do. You should then see the HUD (indicator) for ACTION pop up on the screen in the corner you chose in the “HUD Settings” section, in ACTION.

Note that this may not always be needed… For example, if you launched BF4 in Windowed or Borderless modes, it may not be required. In Battlefield: Hardline, it seems to be needed no matter what mode you run the game in [for the interface of these programs to be shown and able to record without issues]. For example, I just started up Hardline in Windowed mode a couple of times as a test – with ACTION and FRAPS – and those steps were still needed to get these ready to record (their little hud/ui/interface did not show up at all until the above command was entered. 

Another way I saw suggested in Forums, was to enter in the command via a User Configuration file (User.CFG), created in the game directory. For those who don’t know, a User Configuration file is simply a text file that the game will ‘run’ when it starts up – and this text file can have commands listed in it, so that you don’t need to manually type the command each time you play the game.

Although even a Battlelog Moderator suggested it at one time, here, it seems it is possible that this process can be “detected” or “seen as” a hack – and you can effectively be Banned, Blacklisted from Ranked Servers, and other negative actions taken against you – as seen in this thread at the Mirillis’ Forums, here… Although I am sure there are many people out there using this command in a Configuration/Startup File without issue, as it has happened to some people in the past…I personally would suggest against going this route, for now, and merely type it in whenever you want to use ACTION/Dxtory/FRAPS/etc to record your gameplay in Battlefield games.

On my own, I figured out a faster way of typing this command into the Console and wanted to share it here – apparently the Tab key will try to ‘guess’ at the terms you are typing in (much like the Command Line or Terminal in Unix, Windows, and other operating systems [black box screens that you open to enter commands]) and by using the Tab key, you can quickly enter the command above by using these steps, after opening the in-game Console with Tilde (~):
Hit “r” then the Tab key
Hit “d” then the Tab key again
Hit “p” then the Tab key one more time
Hit “0” (zero) and hit Enter
That’s it! 
R-tab-D-tab-P-tab-Zero. Done! Now, the same command as above has been entered even faster and you should see the HUD/indicator for your preferred recording program pop-up on the screen – and you can now record your battles once again. Here is an example/reminder GIF of using the Tab input method for this command, in Hardline:

GIF Example/Tutorial/Reminder of How To Get ACTION, Dxtory, FRAPS And More to Work With Battlefield:Hardline
(Click to see Full Size – Save and Share with others!)

Hopefully the above gets these programs working with Hardline for you too, dear reader, as easily as it did for me.

See You In The Game!

[Personal Log TwoZeroOneSixPointSix: I could not find the ‘original’ bearer of this wonderful information, to give Credit to them – and to find out “why” it solves the issue with these few recording programs (as I am not a programmer, the reason is not immediately obvious to me) and I always like to try and share the “why things work” of solutions I present, to others as well. I eventually assumed it was a developer at some point in time, but in the vast posts of passed-on knowledge, their name has become lost into the aether… Regardless, I want to say ‘thank you’ to whomever this helpful dev is – and I want to pass on that thanks to all the other anonymous sharers of this tip [about this issue with Hardline] on Forii everywhere. This QuickTip is merely a culmination of, or passing on yet again of, this great bit of information on this issue with these few game recording programs and Hardline. Enjoy]

Taking pills and supplements

Pills and supplements both have their uses, but only in moderation and only as long as strict guidelines are followed.

Over-the-counter (OTC) diet pills

The 1991/2 Weight Loss Practices Survey, sponsored by the US Food and Drug Administration (FDA) and the National Heart, Lung and Blood Institute, found that 5 per cent of women and 2 per cent of men trying to loseweight use diet pills. Products considered by the FDA to be OTC weight- control drugs are primarily those containing the active ingredient phenylpropanolamine (PPA), such as Dexatrim and Acutrim. PPA is available over the counter for weight control in a 75mg controlled-release-dosage form. The medicine should be used in combination with a restricted diet and exercise.

Diet Start

Using diet pills containing PPA will not make a big difference in the rate of weight loss, says Robert Sherman of the FDA’s Office of OTC Drug Evaluation. ‘Even the best studies show only about a half pound (250g) greater weight loss per week using PPA combined with diet and exercise,’ he adds. Sherman cautions that the recommended dosage of these pills should not be exceeded because of the risk of possible adverse effects, such as raised blood pressure and heart palpitations.

Supplements

To rely on taking pills as a way of supplying nutrients is not ideal, for in a perfect world such nutrients should come from our food. But when you consider the quality of some of our food — fruit and vegetables grown in mineral-depleted soil, picked before they have ripened and shipped over vast distances in refrigeration, then put into long-term storage; meat full of hormones; grains stripped of most of their nutritional content — then taking a good multivitamin supplement and possibly extra vitamin C can benefit most people. And while you are trying to balance your blood-sugar levels, reduce body fat and rebuild lean muscle tissue, there are a few supplements that may help.

Key supplements

Magnesium

A fundamentally important mineral that counters insulin resistance.

It is hugely deficient in the Western diet. Consider taking 230-600mg per day, unless you have suffered kidney failure or have a high degree of AV heart block.

Quercetin

A flavonoid with powerful anti-inflammatory properties that helpsto control high insulin levels and inhibit fat production. Take 200-400mg three times a day before meals.

Omega-3 fats

If you don’t eat fish, take 1,000-3,000mg of fish oil daily in capsule form. Vegetarians can use flaxseed oil or crushed flaxseeds instead of fish oil capsules. Try flaxseed oil in salad dressings (or even in smoothies) to ensure you get enough of this health-enhancing fat.

Chromium

A trace element that plays an important role in carbohydratemetabolism and regulating blood-sugar levels. It has proved useful in treating diabetes and shown to be effective in encouraging the body to lose fat, not muscle, when dieting. Take 400-600mcg of chromium picolinate or chromiumpolynicotinate a day.

Lcarnitine

Used extensively by athletes to ensure maximum performance inendurance or aerobic sports. It is also useful for weight loss because it is involved in burning fat in muscle cells. Take 1,000-3,000mg per day.

DIETARY MYTH

Myth: I will get quicker results if I use diet pills.

Fact: there are no shortcuts — no magic pills. Losing weight sensibly and safely requires a multifaceted approach that includes setting reasonable weight-loss goals, changing eating habits and getting adequate exercise. Appetite suppressants (diet pills) may help some people in the short term, but they are not a substitute for adopting healthy eating habits in the long term.

INTERIOR DESIGNERS NEW YORK CITY

INTERIOR DESIGNERS NEW YORK CITY

INTERIOR DESIGNERS NEW YORK CITY

Are you planning an interior designers in New York City? Looking for the lights of New York City? A field of interior design flourishes at New York Medical Interior Design. This is a niche area of ​​design. The focus is that of furnishing medical care institutions must be given to patients not only the service friendly, but friendly design as well. The reason is that hospitals will not only try to repair the physical ailments of patients, but the psychological and spiritual well-being of the patient as well. The population is aging and the need for sensitivity to the design, construction and installation is becoming an important part of the management of age. responsive design provides some relief therapy and improved quality of life for retirees.

Interior design students and professionals are increasingly aware of the medical concept of interiors in New York and other large cities. “Health professionals and designers believe that the concept of environment helps patients physical, mental and emotional wellbeing. What exactly does New York medical interior design involves what are the therapeutic and economic benefits? If medical services who wish to provide a therapeutic context, then what should be the development architecture? INTERIOR DESIGNERS NEW YORK CITY are important points interior designer must consider when creating a design for a medical center. If the installation activity promotion and creativity, so that should be incorporated into the design.

The space must be organized so that patients have the privacy of your health care environment. Planting, lighting and colors have been used effectively to create a pleasant environment must not disrupt or interfere with the routine of the patient. Factors such as codes, regulations, and the money available for the design of medical affairs in New York interior designer, is responsible for knowing and following. There are several quality books on the interior of the doctor. If a medical institution on patients’ and Senior Care then they should definitely consult an interior designer experience in this field. If the search for textbooks in the field not to look over the books written by Jain Malkin. His research on the subject has led to a series of excellent books. Interior designers new york city research has resulted in more and better places for patients and those who work to change the appearance of buildings and health facilities.

BEDROOM DESIGNERS NEW YORK CITY

BEDROOM DESIGNERS NEW YORK CITY

KITCHEN INTERIOR DESIGNERS NEW YORK CITY

KITCHEN INTERIOR DESIGNERS NEW YORK CITY

Franchisee Profile: Bill and Bob Aicklen

Franchisee Profile: Bill and Bob Aicklen

Bill Aicklen and his brother Bob, who is currently based in Texas, will be opening their fifth Workout Anytime gym in May. The brothers opened their first gym in Decatur in November 2009; bought the company’s flagship store in Dunwoody in 2012; purchased the brand’s first franchise location in Douglasville in 2013, and built their fourth store in Rome in June 2013. 

Bill, 63, received a Bachelor of Arts in philosophy from Old Dominion University in Virginia, and landed his first job in the banking industry working in the operations and financial systems department. From there, Bill moved on to spend the next 30 years of his career in the computer software business, performing various roles including post-sales, training and support. 

In 2006, Bill decided that he wanted to get out of corporate America and Bob, who was interested in investing in businesses, invited Bill to manage the operations. 

The first business that the brothers partnered in was an express oil change franchise. They built and operated two stores in Woodstock before selling in 2012 to focus their time and effort on Workout Anytime. 
How did you learn about Workout Anytime? 
We were looking for other business opportunities, and Bob came across Workout Anytime on the Internet. A business broker also presented the concept to us. 
Why did you choose an opportunity with Workout Anytime? 
From a franchise standpoint, it’s an easy business to get into; it’s simple. There’s not a lot of moving parts and you can staff the gym with just one or two people. Also, we both have strong customer service backgrounds and understand the importance of hiring the right people and providing excellent service. 
How has business been since joining the brand? 
We have between 1000-1700 active members at each location. Since we took over the Douglasville store and invested money into upgrading the equipment, we have turned it around. Our club in Rome is based in a small city with very little competition in terms of big name brands, and we have been very successful there. I expect Suwannee to also do well because it’s in a highly concentrated residential area. 
Are you involved in any charities or community outreach?
We localize our charity work depending on the club, and we usually donate free memberships for silent 
auctions. We also partner with Red Cross by allowing them to park their blood drive buses in our parking lots every quarter – the next drive will be in Douglasville at 3pm on May 12. We have also previously put buckets in our gyms for people to donate pet supplies for the Humane Society.

Curing the carb on a vegetarian diet

Adapting the Fast Track, No Backtracking and Keep on Tracking plans for vegetarians raises all sorts of issues. It certainly isn’t impossible, but your level of choice will be somewhat restricted in the initial phases of the plan — especially if you are a bona fide vegetarian who doesn’t eat fish or eggs, as well as meat. A balanced healthy diet is the ultimate aim of these plans.

Many people adopt a vegetarian diet for reasons of health rather than ethics, but unless you are careful about menu-planning, the average vegetarian diet isn’t necessarily any healthier or less fattening than that of a non- vegetarian. There is often a tendency to combine too many complex carbohydrates with high levels of saturated fats — think pizza, jacket potato and cheese, fries with manufactured mayonnaise or sugar—ridden ketchup. In fact the chances are your diet could be less healthy. This is because vegetarians need to eat a variety of plant-based foods to provide all the essential amino acids that are readily available in animal protein. If just one of the essential amino acids is low or missing then protein synthesis will fall to a very low level or stop altogether.

Diet Start

Complimentary proteins

The key to ensuring that you recive the full compliment of essential amino acids on a vegetarian diet is to combine beans and grains. If you always choose a protein and a grain from the two lists below then your protein intake should be balanced.

The risks of a diet too low in protein

If you arenot careful then you may not have enough protein in your diet. Protein deficiencies in adults may result in lack of vigour and stamina, mental depression, weakness and poor resistance to infection. Antibodies will not function as well as they could — a condition that impairs the healing of wounds and recovery from disease. If you have been through a period of ill health then a higher intake of protein is vital in order to rebuild or replace tissues that are no longer functioning properly.

Good nutrition

In addition to making sure that you eat enough protein, a vegetarian diet may also be lacking in iron, zinc, calcium and vitamin B12 and D — all of which are normally found in animal products. However, these vitamins and minerals can all be found in alternative animal-free sources, and these foods should be staple foods on a vegetarian diet.

Low-carb plans for vegetarians

You may think that it is impossible to follow the Fast Track, No Backtracking and Keep on Tracking plans if you are vegetarian, but you would be wrong. If you want to create vegetarian versions of these plans then there are a number of simple rules that you will find it helpful to follow:

  • Eradicate all processed and refined carbohydrates from your diet.
  • Follow all the general guidelines for the individual diet plans, such as drinking lots of water and eating the bulk of your fruits and vegetables raw.
  • Use the individual plans as a starting point and adapt the recipes to suit your diet.
  • Use tofu, whey protein drinks, certain cheeses, eggs and nuts to provide adequate levels of protein and help you to balance your blood sugar levels.
  • Always carry snacks such as nuts, protein drinks or hard-boiled eggs with you as it may sometimes be difficult to stick to your diet when you are eating out.
  • Try to avoid situations where it would be very easy to break your resolve, such as when you are hungry and the only lunch option available is a sandwich.
  • If a book exists called A million and one things to do with tofu — buy it.
  • Make food as interesting as possible by experimenting with fresh herbs, spices and oils rich in omega-3 fatty acids such as flaxseed oil.
  • Boost the nutritional value of your food by adding fresh sprouts, such as alfalfa, to your salads, soups and smoothies.
  • If you start to feel tired and lacking in energy, add small amounts of brown rice or other wholegrains to your meals.

WORKOUT ANYTIME in Club Industry

WORKOUT ANYTIME in Club Industry

In an article titled, “Reaching Landmark 50 Gyms Open, Workout Anytime Prepares for Rapid Acceleration in 2014” features WORKOUT ANYTIME’s 50th club opening. Along with opening their 50th location WORKOUT ANYTIME is looking at rapid growth acceleration through the 2014 year. WORKOUT ANYTIME’s CEO and co-founder Steve Strickland outlines a few important development metric’s of the year such as in 2013 WORKOUT ANYTIME doubled in locations.
You can view the full article here. 

Carbohydrates, good or bad for dieting

Another distinction that some nutritional counselors make is between refined and unrefined carbohydrates. In dieting index weight loss, we prefer to classify carbohydrates as low-, medium-, or high-dieting. However, because you’re bound to hear carbohydrates defined as refined and unrefined, this section discusses how the terminology relates to the dieting index.

Refined carbohydrates are more highly processed than unrefined carbohydrates. Processing includes such activities as cooking, milling, and separating the whole food into parts. Examples of refined carbohydrates are white bread, white rice, most packaged breakfast cereals, donuts, cakes, cookies, bagels, fruit and vegetable juices, fruit drinks, soda, and candy. The list goes on. Refined carbs are usually high-dieting, but some can be low, as in vegetable juice and some fruit juices.

Diet Start

Unrefined carbohydrates are those kept in their natural state. In general, the unrefined carbohydrates tend to contain more fiber. Examples of unrefined carbohydrates are whole vegetables and fruit, whole grains, dried peas and beans, and nuts and seeds. Some foods are processed more than others. For example, fruit juice is not processed as much as fruit drinks. Usually unrefined carbs are low-dieting, but not always, so be sure to check the dieting index listings before you eat them.

Pastas

Even though regular pasta is a highly refined, processed carbohydrate, its dieting value can be low, medium, or high, depending on how you cook it. If you cook spaghetti for only 5 to 6 minutes, its low-dieting. Other types of pasta may need slightly more or less cooking time. If you open a can of prepared spaghetti in sauce, those noodles will have a higher dieting index because they’re mushy.

Cook pasta just until it softens and you’ll be eating a healthier meal. The longer pasta is cooked the more available the starch in the pasta is for quick digestion—exactly what you don’t want.

The Good and the Bad

Carbohydrates aren’t good or bad; the difference is in how you eat them and how much of them you eat. This is one of the reasons why dieting index weight loss works so well. You don’t need to give up your favorite treat food, whether it’s white bread, bagels, or candy bars. But you do need to eat them in such a way that you don’t cause a quick rise in your blood sugar levels, and you do need to watch portion sizes.

The dieting index gives you a way of managing your blood sugar and insulin levels, thus assuring that you aren’t storing fat and also that you continue to lose weight.

One way to do this is to manage your dieting load by meal and by day. You’ll be balancing the low-dieting foods with some high and some medium, and overall, you can keep your insulin levels low.

Now’s the time to give up the notion of bad and good carbs and of fattening and nonfattening carbs. Instead, accept all carbs as okay, based on how you eat them.

Fallout 4 – “Starting Out: On Settlements, Building, Crafting, Materials And More” – A Beginner’s Guide of Tips and Concepts to Settlement Building and Development [UNDER CONSTRUCTION]

Update: Added images for Main Concepts sections (Food, Defense, etc)
Update: Added steps for How To Assign a Settler to a Work Station/Shop/etc
Update: Added how to Give Yourself Any Building Components, or Food, with Commands (Cheats Section)
Update: Added how to Build past the Size Limit in Settlements (Not a Cheat, Doable on Console as well as PC)

[Note.: This post is ‘LIVE’ and ‘UNDER CONSTRUCTION’, as I continue to add more data and Tips and Example Screenshots to it… I decided to make it available now however, to assist those playing Fallout 4; especially those just starting out – seeing as there is a Steam Sale on now (go get it! heh). I will be adding more Text and Tips and Screenshots and More and this post cannot be considered ‘finalized’ until after I add a ‘Final Footer Image’ to the posting (see some of my other posts for examples of this type of ‘end image’ I put in my posts). Please excuse changes as they occur and temporary mistakes and spelling errors, which may show up should you return to this article while it is under development. Enjoy, however – I hope you find something helpful to you – and have fun in Fallout 4!]




I have been having a ton of fun playing Fallout 4 lately… and while I am taking forever to finish up a ‘First Impressions’ of the game [I keep playing and building up my Settlements instead of writing!], I wanted to share some Tips on handling Settlements; some concepts and ideas that might help new users to the game, players that may not have developed their Settlements very much yet, or players that are looking for ways to possibly improve or increase their Settlements and their Production and associated benefits (Bottlecaps income from Stores, Settlers roaming around and finding/providing you with Supplies, Clinics for healing and removing Radiation, and more).

Screenshot showing the Workshop Area of The Sunshine Tidings Cooperative, Decorated (Work In Progress).
(High Resolution Texture Pack enabled [not 100% sure, sorry, but I think it was at this time]
The Automatron DLC Robot Workbench can be seen, center background. Minuteman Flag seen, left wall, foreground)
Click to see Full Size

[Settlements and their development and growth is one of my favourite aspects of the game, not only because it supplies you with Junk/Scrap/Materials to build with and Money as well, but also because of the ‘life it breathes into the game’… every Settlement becomes ‘alive’ with people coming and going, working and resting, asking for help or talking amongst themselves around you. After getting a few Settlements set up and running smoothly, they become a place to restock, sell and collect, modify and improve gear, rest and maybe enjoy some scenery, taking a break from the action by building and re-working, improving and creating a place of solitude and pride, in each little ‘town’ in The Commonwealth…]

Example of the Workshop Mode interface bar, normally seen at the top of the screen in Workshop Mode (Building mode)
Click to see Full Size 

Here then, are some main ideas to start off with or to keep in mind  – hopefully helpful to fellow gamers who are either starting out in Fallout 4 [from the latest Steam Sale], or are looking for ways to improve their currently-undeveloped Settlements (colour-coded somewhat-by-importance to help separate them for easier reference):

1.  In the very beginning, build Food and Water and Beds, as much as you can.  

These three things (Beds, Water, Food) are the main limiting factors to how many people will come to live in a Settlement. 

 [The maximum amount of people that can ‘live in your town’ is supposed to be your Charisma+10 (so if you have 5 Charisma, that would be 15 people); Provisioners who run Supply Lines (more on them later on down further) don’t seem to count towards this calcuated total (by my experience so far). Also, this limitation is stated in many places online – however, I have Settlements that are much higher than this number (over 30!) so I have not finalized the concept of Settlement Limitation Amount, at this time] 

Don’t worry about Guard Posts and Turrets, at least, as much as you might think at the start – because although they do help with the overall safety of your Settlement; reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in the Raids, and setting a higher Security rating (which seems to affect Happiness, but not Immigration rate – more on Happiness later on…) – you can actually put the responsibility on yourself to take care of Raids at first [and get the bonus experience and loot that comes with it!] by Fast Travelling to the Settlements as soon as you see the ‘Help Defend’ tasks come up – or making ’rounds’ between your Settlements as they are starting up, as Raiders sometimes attack while you are there and you can then help clear them out – and get all the Loot they drop, too! 

[The game leads you towards building Turrets at your Settlements near the beginning, too – in the form of a ‘tutorial’ of sorts, somewhat-early on]


2.  Plant any Food (Corn, Tatos, Mutfruit, Gourds, Watermelon and Razorgrain) you find, at first.

Starting out, you want to maximize your growth, so re-planting food you pick up not only increases how much food a Settlement can produce/feed for the Settlers, it also multiplies how much you can harvest!

You can harvest any plants by ‘picking them’ (hitting the Action key while close to them). You can then immediately re-plant the food you just picked, by entering Workshop Mode and going to the Resources>Food section.

A while later, you can start to Cook with your Food – not only do the meals you prepare have special bonuses (they are all different!) but boiling up some VEGETABLE STARCH, made from all materials that you can gather at any Settlement, is a great way to create your own Adhesive building material. Used for almost everything, Adhesive is a very important material to have!



Vegetable Starch, a source of Adhesive, you can create yourself by cooking together Corn (3), Mutfruit (3), Tatos (3) and using Purified Water (1). Purified Water, you can either find as you travel, cook yourself [3 Dirty Water can be boiled up to make 1 Purified Water], or use Water leftover from your Water Sources in your Settlement – as any extra Water that is not used by your Settlers will be ‘kept by the Settlers in the Workshop inventory’ [in the Workshop Bench]. You need Adhesive for Modifications to Weapons and Armor and even for Building – it is used for almost everything and is therefore very important to keep stocked!




3. Tied for the third most important thing/things to start thinking about, are these two concepts:

    • As you can, increase your Turrets and Guard Posts, to increase the Security of the Settlements, and as stated above, reducing the amount of Raids that occur, reducing the amount of Damage that will be sustained in Raids, and keeping your Settlers ‘feeling secure and more relaxed’ (Happier), too. 

    Although the Security Rating of a Settlement (“Defense”) does not effect the speed at which Settlers will immigrate to your little town, the Defense Rating of a Settlement affects the Happiness Rating – which affects how ‘Productive’ the Settlers are in that Settlement (speed of gathering resources, amount of Caps earned, etc) – more on Happiness later on…

    If you have more Guard Posts than you have assigned Guards, they will ‘patrol’ around the Settlement, going between them, back and forth. If you have the same amount of Guard Posts to Guards, they will each stay at one, standing ‘on guard’, most of the time.

    [I personally like to have a couple extra Guard Posts created in my Settlements just to have the Guards move around more… It creates more movement in the Settlements overall and makes them ‘feel more alive’ – something I really like in my Settlements!]

    • Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, “automatically” for you to then use!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time – they will even ‘break down’ the items at the Scavenging Station – and you can watch them do it! 

    [If you have the Automatron DLC/Expansion, you will find that robots Assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    ‘How do you Assign Settlers to Scavenging Stations?’
    Further down, there are Steps with Screenshots for each,
    in the Section “How To Assign Settlers To Work Stations”


    After a while, with more Settlers coming in (sometimes they will migrate to your Settlements quite fast, seeing a solid place to find food, water, beds and have some security/safety), you’ll start to see Junk/Scrap/Materials pile up slowly, even Bottlecaps flowing in, sitting there waiting for you in the Workshops of your Settlements. 

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    Don’t forget to ‘make your rounds’ and periodically travel around to check all of the Workshops, grabbing these extra ‘Caps and ‘Mats, snatching-up the extra Purified Water you’ll see in them, to sell for even more Bottlecaps (especially if you are more desperate for money sometime). Purified Water is created by extra Water production of the Settlement; water that the Settlers aren’t using from the Sources you have set up. This extra Water gets placed in the Workshop for general use and Supply Line provisioning to other Settlements – but since it sells for a decent price and ‘piles up for free’, grab it and Sell it, if you really need ‘Caps!



    4.  As you find more Settlements, start up Supply Lines between them all…

    Supply Lines are ways to ‘share’ the resources of the Workshops between Settlements. You assign a Settler to create a Supply Line between two Settlements, and they then become a “Provisioner”, leading a Caravan between the two Settlements, taking supplies between them so that you can effectively ‘use the Junk/Scrap/Materials/Components of both of them’, no matter which one you are in!

    Supply Lines are started by entering Workshop Mode, then going up to a Settler (one that is Unassigned with no ‘job to do’, or one that you want to make run a Supply Line instead of the job they are currently assigned to) and choosing Supply Line from the bottom menu bar.

    That townsperson will then become a Provisioner, leading a caravan and a wacky Brahmin through the wilds of The Commonwealth… between the Settlement that they originated in and the one that you assigned them to make a Supply Line to.
    Between these two Settlements then, you can utilize any* Junk/Scrap/Components between them, in their Workshops.

    *Note that it appears you cannot share any Weapons or Apparel that you put in [I have not tested Miscellaneous items yet]; you can only share Junk [as of the time of this posting, this may change in a future Update/Patch in the game, of course].

    Requirement: Supply Lines require the Local Leader Perk to be able to ‘organize the people’, which requires a Charisma of 6 – but it has no Level requirement, so you can get it at the start of the game if your Character has a Charisma of 6. If your Character does not have a Charisma of 6, you can also put Perk Points into Charisma as you Level – you get one Perk Point every time you gain a Level – thereby slowly increasing your Charisma to 6, eventually. You can also put on Gear and Clothes that ‘accentuate your Charisma rating’ [eg. Apparel that says “CHR 1”], to get your Charisma up to 6 ‘instantly’!

    [With places like Tenpines Bluff, a Settlement you find somewhat-early on, that has barely any resources at all and barely anything to Scrap for Building Materials – the game seems to even be encouraging you to think about Supply Lines… at least, this is my interpretation..]

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!


    Workshops will create Scrap building materials (Components) for you ‘automatically’ from any Junk Items you store in them – just ‘keep building’ and if you have the Junk that can be broken down into the Components you need, it will do it for you!



    What I mean by the above Tip is, if you put in a bunch of Forks and Knives you have found (for example), and you want to build something in your Settlement that requires Steel to build with, just go ahead and start Building – your Workshop will ‘smelt/breakdown the Junk items (in this example, the Forks and Knives) into Steel’ automatically, so you can essentially ‘use the Fork and Knife to build with’ – you do not need to “drop the items on the ground and then go into Workshop Mode and Scrap the items one by one” to get the Materials from your Junk items to Build; just select your part to Build and it will let you build it – if there is enough “components from junk parts” to do so!

    [I’m not sure if this changed from an early Patch or something, but I see a bunch of people asking in forums, even recently, if there is an easier way to get Scrap (building materials) from Junk items besides manually ‘Scrapping them one-by-one on the ground in Workshop Mode’ – there should have been a better Tutorial for this, in a way, in the game itself; but I hope this information above clears it up and helps people out]

    Remember: 
    Junk Items = Scrap Components = 
    Building Materials!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!
    • Repeated, Scavenging Station concept from above, as a Reminder:

      Build extra Scavenging Stations as your Settlement grows, as your Junk/Materials allow you to, so as the Settlers keep flowing in, you can assign them to the empty Stations – concentrating more on Scavenging over time will get your Settlers working and searching around, bringing you any Junk Items they find, ‘automatically’ for you!

    Scavenging Stations are assigned to Settlers, who then start wandering the Settlement randomly, picking up Scrap and Junk items they find and placing them in the Workshop over time.

     [If you have extra Food/Plants/farming and Guarding that needs to be done, Settlers seem to assign themselves to those first, if you haven’t been by to visit in a while to ‘tell people what to do’ – I have returned to Settlements to find New Immigrants that have started Farming or standing at Guard Posts on their own – but I have yet to see Settlers that Assign themselves to Scavenging Stations]

    [If you have the Automatron DLC/Expansion, you will find that robots assigned to Scavenging Stations will simply stand next to the Station with no animations occurring (sadly)]

    How To Assign Settlers To Work Stations (To Get Them To Perform Jobs In Your Settlement, Such As Running Shops/Stores Or Gathering Items For You To Use)

    Below, are the five simple steps to Assigning a Settler to any Work Station, getting them to utilize it and start contributing to the income of Supplies/Income of the Settlement. In this example, we are going to Assign a Settler to a Scavenging Station:

    1. When you first build/place a Station or Store/Shop or other useable buildings in your Settlement, it will show up as “Unassigned”, in the Workshop Mode interface. All buildings that are Assignable in a Settlement will show a ‘person icon’, in Red, to show that the building has a Requirement that needs to be fulfilled, for it to begin functioning.

    2. Find a Settler that you want to Assign to the Station. This can be a Settler that is already “Assigned” to something (so you can change their Job they are Performing in your Settlement), or a Settler who is “Unassigned” (doing nothing specific). Highlight the Settler by looking directly at them, then press the ACTION button to begin to ‘COMMAND them to do something’…

    Settlers who are Unassigned still gather Junk Items they find while walking around and put them in the Workshop Inventory for use by everyone. However, this happens slower than if they were Assigned to a Scavenging Station (which gives them ‘access to tools’). “Unassigned Settlers” contribute to ‘making people feel uneasy’ in the Settlement – which negatively affects the overall Happiness of that Settlement (resulting in lowered Production for that Settlement). Assign all Settlers to Tasks, or Relocate them to another Settlement (“Move” them), if there are no Jobs/Tasks for them to do.

    3. Go back to the Station/Shop/Building that you want to Assign the Settler to, and highlight it by looking directly at it. Then click the ACTION button to ASSIGN the Settler you just started COMMANDing, to ‘utilize this Station’ (in this example, the Scavenging Station, shown below).

    4. After clicking ASSIGN on a Station/Shop/Building, the ‘person icon’ should change from Red to Green, to show that a person is now assigned to the Station/Shop/Building (for example, the ‘Requirement for the Station to function’ is fulfilled). You should also see a message in the upper-left saying, “This resource is now assigned.” – that’s it! In this example, you have now Assigned a Settler to the Scavenging Station.

    5. If you go back to the Settler, you can check to make sure they are properly Assigned, by looking at them directly in Workshop Mode. They should now show the Task they are Assigned to (in this example, the Settler now shows a “Scavenging Station Icon” (a Buzzard, ‘the scavenger bird’)).

    Perform the above steps whenever you want to Assign a Settler to any Work Station, Guard Post, Shop or Store – the steps are the same, no matter what you need to have Assigned.

    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Example of a Crafting Station, which allows you to create or modify items in the game. This is a Weapons Workbench (from Sanctuary), used to Modify found Weapons, adding higher capacity, faster firing rates, more powerful scopes, and more.
    (Click to see Full Size)


    Starting out with Weapons (Similar Concept to Armor, Below)

    In the beginning, other than the best Weapons you can save for yourself to use (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Weapons to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Weapons you find and improve them as you Unlock Perks with your Points (using the Blacksmith skill) – it will also let you find other parts/materials as you ‘break down’ the Weapons you find into typical weapon-type-materials like Steel, Wood, Plastic and Screws – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Example of a Crafting Station, that allows you to create or modify items in the game. This is an Armor Workbench (from Sanctuary, seen in the rain), used to Modify found Armor, adding bonuses like more defense (adding more material to armor), or putting pockets in it (to allow you carry more weight), and more.
    (Click to see Full Size)




    Starting out with Armor (Similar Concept to Weapons, Above)

    In the beginning, other than the best Armor you can save for yourself to use, (or share with your Companion), SCRAP the rest for Materials…

    Don’t worry about building up a ‘Collection to Sell’ [at the start], you will run into so many enemies that you will have lots of spare Armor to Sell for Caps later on. Scrapping for Materials not only lets you have Mats to Modify other Armor you find and improve them as you Unlock Perks with your Points (using the Armorer skill) – it will also let you find other parts/materials, as you ‘break down’ the Armor you find into typical armor-type-materials like Rubber, Cloth, Leather and Steel – sadly, you cannot break down Weapons to gain the ever-important Adhesive, it seems [it is ‘already used’, I guess!].

    Short Story/Example About Armor: Because I could Modify and Customize Raider Arm armor near the beginning, I gave up the higher-protection “DC Guard Left/Right Arm” armor pieces that I picked off of a poor dead DC Guard, [because it does not seem to Modify-able in the game and] because I ‘knew how to Modify’ the Raider Armor to be POCKETED for higher Inventory/Carry space [you need to ‘learn how’, by putting Perk Points (‘skill points earned every Level’) into Armorer, a Strength 3 skill]. I put the DC Guard Armor in a Dresser at the beginning for the time being, using the ‘Pocketed Raider Arms’ I could Modify, then – a higher Carry Weight Limit is a valuable commodity – especially at the beginning!


    Pick Up Everything! Loot Every Body And Clear Out Every Location You Find!

    Did someone say CHEATS?

    Sick of trudging around The Commonwealth like a Brahmin with two heads cut off, looking for junk to break down into materials to ‘just build’ with? Tired of picking up every piece of Junk you find, trekking in and out of town constantly and thinking “I just want to build up my base…” or “can’t there be an easy way of getting junk” or “there’s gotta be a faster way to get junk”..?


    Then wonder/wander no more – there is a way to instantly get all the materials you want!

    In Fallout 4 [and most Bethesda games], you can type the item you want and how many you want, of any item in the game, into the Command Console. However, you need to know the item’s Unique Identification Number, first (known as the “Base ID” of the item, in Bethesda games). 

    One way to find the Base ID of any item or object in Fallout 4, is to open the Console (by hitting the Tilde key, “~”, usually found next to the Number 1, in the line of numbers across the top of QWERTY keyboards), and clicking on the item or object in the game. It will then show the BaseID of the object at the top/center of the Command Console area.
    For an example; if you wanted to find out the Base ID of that Deathclaw running at you (and since we are in the ‘Cheat Section’ of this article, say… you want to kill it instantly), then you would find out the ID for it by opening the Console (“~”) and clicking once on the Deathclaw (it should be ‘frozen’ by opening the Console), which would show the BaseID of it just below, at the top of the Console area. Now, for this example of ‘killing it instantly’; you just have to type in “kill”, then a space, then type in the BaseID you see on the screen, and hit Enter. BOOM. That Deathclaw that was running at you (and you were unprepared for, full of inventory and unable to run, no doubt)? It’s dead. “First Crack At The Gear!” 

    [Note1: If you try ‘clicking on the enemy, then typing KILL, then just hitting ENTER’ right away; it may not work as desired. You may end up killing yourself… Although those steps do work, they do not seem to work 100% of the time [in my testing], therefore, the Suggestion of doing the steps from just a bit above (“clicking to get the ID, but typing in KILL and the ID number”), is recommended – to save from accidentally killing yourself and having to LOAD…]

    [Note2: The BaseID seems to change [in my testing], as in, when a Deathclaw (from our example above) ‘spawns’ (comes out of the ground), it will have one ID (and it seems to be ‘unkillable’ for a short time), and then when it starts to come at you and attack, it will change to another ID – which can then be used in the Command Console to ‘kill’ it. Also, Base Identifiers may be ‘Procedurally Generated’, which is, automatically and repeatedly created and changed, as a game goes on. Although this does not seem to happen for items like Food and Materials, it does seem to happen with Enemies and Gear (Weapons/Armor) – so be sure to take the steps above when trying to manipulate objects around you (eg. ‘kill’-ing an enemy), finding the BaseID each time, to be sure that there will not be a mistake or missed opportunity, to utilize the BaseID in the Console.]

    Want nearly-infinite food?
    Want nearly-infinite materials to build with?
    Want to ‘just build and not worry about going around collecting Junk (to build with)’? 

    Then wonder/wander no more – here is a way to instantly get all the building materials you want!


    [WARNING/Suggestion: Although getting all of the items you could ever want, whenever you want, to ‘Just Build’ – effectively turning the game into “Fallout 4: The Sims Apocalypse” where you just Build and Decorate and work on keeping your Settlers at bases Happy (not that that’s a bad thing) – it can potentially contribute to making the game ‘less exciting’, as it takes away much of the need to go anywhere or do anything (other than keep your Settlers’ Happiness maintained). This isn’t a bad thing necessarily (I have one Character I created just to play around and learn the Build Mechanics with and have fun just building and decorating..). I only mention this because I would like to Suggest to create a separate Character to do this with, or remember that when the game ‘gets kind of boring’, to create a Character where you ‘don’t cheat at all’, to create suspense/tension within the game. No matter how you prefer to play though, I hope you enjoy Fallout 4 as much as I have – and still do… Have fun!]

    I have some Batch Files for Fallout 4 below, which will allow you to ‘type in to the Console what you want’ [Materials to build with, or Food (so you won’t have to worry about Farming or feeding your Settlers)] and you will instantly have a ton of those items on your character.
    With the Items in them listed in Alphabetical Order, I have one file that is for getting Materials (Scrap/Junk to Build with), one file that is for getting Food (to Eat/Cook with) and one that is for getting huge amounts of both in one shot…

    To use these Batch Files in Fallout 4, simply download the Text file(s) and place them into the Fallout 4 game directory/folder, where the game data/files are.
    [Don’t worry, they are just Text Files, but I give directions on how to make your own further down, if you ‘don’t like to download things unknown very much’.]


    To quickly find the Fallout 4 game files location [in Steam, on PC]:

    Go to the Library section in Steam and Right-Click on the “Fallout 4” listing, choosing ‘Properties’.

    In the Properties window that comes up, click on the ‘Local Files’ tab.

    It shows you what Drive the game is on; but to quickly get to the game files themselves, click on the ‘Browse Local Files’ button, which will open a new File Explorer window (Windows).

    This location is where you want to Save the Text Files to (the ‘Batch Files for Fallout 4’), usually it will have a Path like “SteamLibrarysteamappscommonFallout 4” on whatever Drive/Partition you installed the game to.

    In that folder, Download/Save (or ‘Paste’, if you ‘Copied’ the files from another location) the .TXT files, to be able to call them up from the Command Console in-game. 

    Example of how the ‘Batch Files’ (Text Files) look, after being placed in the Fallout 4 Game Folder
    (Click to see Full Size)
    Here are the steps to use the .TXT-format ‘Batch Files’ once they are in the game directory (shown for the file for getting Food, the file for getting Building Materials, and then the file for getting Huge Amounts Of Everything To ‘Just Build’ if you want...):

    1A. To use the file that gives you 1000 of all types of Food (so you don’t have to worry about Farming or Feeding your Settlers for a long time); type in

     bat allbasefood

     in the Command Console and hit Enter. That’s it!  

    1B. You can now close the Console and you’ll find you have 1000 of every type of Food in the game, on your person.

    1C. Go to a Workshop to Store the Food there (otherwise you will be ‘overburdened’ with all of that Food in your pockets) – you will find the Food items under the AID section in your Pip-Boy, as shown below:

    2A. To use the file that gives you 1000 of all types of Materials to build with (all of the Crafting Components, so you don’t have to worry about going out and looking for and collecting Junk items to Scrap for a long time and can ‘Just Build’, if you want to play that way for a while); type in

    bat allbasematerials

     in the Command Console and hit Enter. That’s it! 

    2B. You can now close the Console and you’ll find you have 1000 of every type of Building and Crafting Material in the game, on your person.

    2C. Go to a Workshop to Store the Materials in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Crafting Components in your pockets) – you can just hit the STORE ALL JUNK button, to do it in one step.

    For the last one, which gives 9001 of every single type of Food AND Crafting Component in the game [maybe I should have named it “IJUSTWANTTOBUILD.txt”], use the steps below:

    3A. To use the file that gives you 9001 Of All Types Of Everything To ‘Just Build’ With (all of the Crafting Components in the game, so you don’t have to worry about going out and looking for and collecting Food OR Junk items to Scrap, for a long time and can ‘Just Build’); type in

     bat allyourbase9k

    in the Command Console and hit Enter. That’s it! 

    3B. You can now close the Console and you’ll find you have 9001 of every type of Building and Crafting Material in the game, on your person.

    3C. Go to a Workshop to Store the Junk Items (Materials) and the Food (from the AID section in the Pip-Boy), in the Workshop Inventory (otherwise you will be ‘overburdened’ with all of those Every Frelling Thing In The Game For Settlement Building in your pockets).  

    Here is where to Download the Text Files to place into the Fallout 4 directory/folder (the ‘Batch Files’ to use), from the GoogleDrive for The Blog:

    allbasefood.txt file
    allbasematerials.txt file
    allyourbase9k.txt file

    If you don’t like to normally Download things ‘from unknown places/people’ [aren’t we just ‘Friends That Haven’t Met Yet, though, my dear reader?], here is what the Google Drive link looks like when you click on it:

    Still, feel free to Scan the files with your installed Anti-Virus Program(s), or online through something like Virustotal.com (this is actually a good idea to do with anything Downloaded..).

    If you you rather create your own Text Files, to place into your Fallout 4 directory/folder, to run as ‘Batch Files’, to give yourself an amount of these items, instead of fully Downloading the Text Files offered above – then here are the steps to create your own files:

    Is There A Way To Build More, Past The Limit?

    Sadly, there is a limit to how much you can Build in a Settlement – indicated by the SIZE bar in the Upper-Right corner of the screen in Workshop Mode. While this limitation is there to stop us from building so much that it makes the game go down to 1fps in that area, the SIZE limit is pretty conservative [in my opinion] and I found out that there is an easy way to ‘Build More’ – getting past that Build Size Limitation….

    When you see the message, “Nothing More Can Be Built.”, you can just press your lips together and blow, making that weird trumpet sound, after reading the steps below. No Limitations for you! Just follow these steps and you can continue to Build in that Settlement:

    (Note that this is not a Cheat, it does not affect Achievements and it is doable on Console as well as PC)

    • Get some Weapons together on your Character (specifically Guns, as this specific technique does not appear to work with Melee or Thrown in my testing). Apparel and Junk does not work for this either.
    • Bring up the Pip-Boy and Drop the Guns on the ground
    • Close the Pip-Boy and enter Workshop Mode (by Activating the Workshop Bench or holding ‘V’ (on PC) to open Workshop Mode)
    • Look down at the Guns on the ground and STORE them in the Workshop Inventory (careful not to SCRAP them, that is not what we are doing here at the moment!)
    • You should now see your SIZE bar going in reverse and it will even change from Red to Yellow to Green. BOOM. More Room To Bloom. 

    That’s it! You can now build more in that Settlement. Enjoy! If you want to retrieve your Weapons, you can just go into the Workshop Inventory (“Transfer”) and get them back – which means you can repeat these steps over and over, as needed! (Don’t forget to Share your Screenshots on Steam or elsewhere – other people want to see what you can do – and it gives them new ideas, too)

    Although it is possible to get past the Build Limit by simply dropping ‘any item’ and Scrapping it [I recently learned this on the Steam Forum for Fallout 4], this is still not what I was trying to do, with the Steps above. My intention was to STORE the Guns, so that they can still be utilized later – selling them for Bottlecaps, or ‘Breaking Them Down’ and taking their Modifications off to use on other Weapons, or just using them as Weapons in the game on the Character (or given to Settlers to help them fight off Raids/Attackers) –  that is why the Steps above utilize my method. Storing the Guns allows you to continue to use them (as opposed to Scrapping them into Components to Build/Craft with).



    [……I am going to add to this post, as I remember things that I already have forgotten and can’t seem to bring back up at the moment to throw in here; but I still hope someone finds these concepts and Tips helpful, for either starting out in the game or improving your Settlements (there are more advanced concepts to come….. Have fun with Fallout 4!]

    Overweight and Food Sensitivity Rule No 1: Delayed Reactions

    These are the single most common cause of false fat.

    Arguably, delayed food reactions cause as many health problems as some of the most horrific of life’s various risk factors, such as smoking or stress. The effects are often subtle and accumulate slowly, but the harm is undeniable. Without a doubt, delayed food reactions cause weight gain. Because 300,000 people die each year from obesity-related problems, anything that exacerbates weight gain is a serious issue.

    Therefore, the average person’s ignorance about delayed food reactions is a serious public health problem. Don’t let yourself be a victim of this lack of knowledge!

    Delayed food reactions are very similar to classic allergies. The biggest difference is that when you have sensitivities, you often don’t notice symptoms right after you eat. Sometimes it can take as long as three days for symptoms to appear. The reason for the delay is that this type of food reaction is caused by a different antibody than the one that causes classic food allergies, and it takes longer for allergens to come in contact with this antibody. This antibody, IgG (or immunoglobulin G), is found only in the bloodstream, so food molecules need to reach the-bloodstream for problems to occur. As long as food macromolecules stay in the digestive tract, no symptoms may appear. Sometimes food molecules move out of the digestive tract almost immediately, but sometimes they don’t.

    Diet Start

    When reactive food macromolecules do eventually meet up with IgG antibodies, the antibodies wage the same basic type of battle fought by IgE antibodies, which cause classic allergies. The IgG antibodies call the immune system into the fight, and histamines and other chemicals are released, causing swelling and other symptoms.

    The IgG antibodies are by far the most common antibodies in the body. They’re three times more common than the IgE antibodies that cause classic allergies; that’s one reason delayed food reactions are more common than classic allergies.

    Because IgG reactions are delayed, people are often unaware of their real cause. If you feel a symptom on Monday morning, it may be hard to link it to something you ate Friday night.

    Another reason people are often unaware of their IgG reactions is that these reactions often don’t occur in obvious places, such as the skin, as do classic IgE allergies.

    Even though an IgG reaction may not be obvious, it can still be very harmful. For example, if you’re allergic to bee stings and get an IgE reaction on your skin from a sting, you’ll be sure to notice and treat it. However, an internal IgG reaction to a food may ultimately cause you much more generalized, systemic swelling than a bee sting; it’s like getting a bee sting to the whole body. But because your reaction is spread over your whole body, you may not be very aware of it. All you’ll notice is that you don’t feel good and have more bloating and swelling. After you’ve read this book, though, and learned what to look for, I guarantee that you will notice how drastically food reactions affect your body.

    Another antibody that can cause delayed reactions is IgA. IgA fights at the front lines — at the mucous membrane sites and in the digestive tract itself — trying to stop allergens from being absorbed by the body in the first place. To do this, it stimulates secretion of mucus, which blocks absorption.

    Studies show, though, that almost half of all Americans don’t secrete enough IgA. Non-reactive people secrete 3,000 to 5,000 mg of IgA every day, but some reactive people don’t secrete much at all. If you’re low on IgA, sooner or later a reactive food molecule will work its way through your intestinal wall and cause a reaction. The more reactive foods you eat, the more likely you’ll be to use up your supply of IgA and lose your front-line force against food reactions.

    Therefore, if you do ‘cheat’ and eat an allergenic food, it’s smart not to eat too much of the food. One jam doughnut might get blocked by IgA, but three doughnuts may overwhelm your forces and push you past your allergic threshold.

    Another factor that depletes IgA is use of certain medications, including antibiotics, antacids, ulcer drugs, cortisone and aspirin. Again, as you can see, it’s not just what you eat that can hurt your metabolism and make you fat.

    Quick Tip: Planetside 2 – Medic Revive Not Working [Note]

    Just a quick tip for those who have recently jumped back into playing some frantic Planetside 2 and thought there was something wrong with the medic tool, being unable to revive, thinking they can’t revive, etc – there was a patch a bit back that changed the Medic Tool so that Left-Click will Heal and Right-Click will Revive. Although changing such a long running/’staple’ operation is a little lip-pursing, it should have the overall positive effect of assisting with attempting to revive within a tight group of teammates (instead of your tool randomly healing someone close, it should more effectively target the face down teammate on the ground). Just a note.

    See You In The Games!

    My Trip to New Delhi & Hyderabad

    I am in New Delhi doing an assignment which requires me to do an organization capacity assessment of 5 research institutions in India to ascertain their capacity to receive research grants.

    The journey was interesting as the flight I took had a group of tourists (religious pilgrimage to Buddhist sites in India) of whom a majority were first time flyers. So it was fascinating to see the excitement in their faces as the flight progressed; from the smallest kid to the old folk (Gray haired men and women who were in their late sixties) started to peer through the windows to steal a glimpse of the geographic features below. I instantly recalled my first flight (which I took to the UK) when I was just a teenager.

    I had dreams of sleeping in the flight; however the rest of the passengers were too excited to be quiet. They were talking in loud voices and moving about so much that sleeping was not an option.

    I arrived in New Delhi and managed to go through the immigration very fast and managed to get my luggage fast as well. However when I went out of the airport my pick up had not arrived; so after waiting for half an hour I took a prepaid taxi to the hotel. As a seasoned traveler to New Delhi, I advice all travelers to Delhi to take a prepaid taxi and always have the hotel name and address handy. Also have the telephone number of the hotel so that the taxi driver can call (they all have mobiles) the hotel and get directions if he does not know the place exactly. So without too much of looking around the driver found the hotel.

    My past experiences with research organizations have been limited to engaging them for research in preparation for various assignments. I am looking forward to this assignment as this is the first time I will be doing work for research organizations.

    a passenger train in India had a most unusual issue, 22 carriages carrying 1000 people, got disconnected from the engine, and the emergency brakes didn’t work to stop it, it rolled backward 7 miles

    http://www.bbc.com/news/av/world-asia-india-43697965/engineless-runaway-train-in-india-gives-passengers-a-scare

    It’s Not Just You™ – The Elder Scrolls: Legends A.I. Seems Pretty Hard To Beat Now [Noticed]

    Just a little notification that, if you are playing TES:Legends recently and find it’s quite a bit harder to beat the computer opponent (AI/NPC)… It’s Not Just You™

    I was in the Beta for The Elder Scrolls: Legends; but never got around to finishing my “First Impressions” article on it [as is how it usually goes for me and posting, heh]. Legends has been out of Beta for a few months now, and if I could summarize the game in one paragraph, I would say that Legends is a Virtual Collectible Card style game, that is ‘both Single-Player and Multiplayer’ (you can play against other human opponents, in matches and “Arena” rounds – but you don’t have to, you can entirely play against the computer AI both in single matches and in ‘Arena playoffs’, if you desire). It is actually more of a “Card Collecting” game than a “Trading Card” game – as I have not seen a way to trade with human players yet – but that is similar to other ‘virtual card games’ of this genre, like Hearthstone and Gwent (“World Of Warcraft” Lore and “Witcher” Lore -based virtual card games, respectively). The game cannot be played Offline and you don’t actually get any ‘Real Life’ Cards of any form; but that again, is the same for the other virtual card games mentioned.

    After playing a little bit when it was first Released, I didn’t play Legends for a few months, only recently picking it up again to play a bit – and boy was I in for a surprise!

    The computer AI as it is now, offensive and ticked off
    (Cropped Screenshot of art by Bethesda Game Studios)

    Perusing the Updates for the game (which there seems to be one of every few weeks, a nice thing to see for a game!) – there was an Expansion for the game released at the end of June 2017 (Heroes of Skyrim) – but nothing that says, “We felt the AI was a little too easy to beat, so we beefed it up a bunch and it also will pull cards out of it’s butt hat, getting exactly what it needs at times, to win!” – so I’m not sure when this AI change occurred… [I didn’t play for a good few months or more, so sometime around mid-2017, I reckon].

    Judging by the recent changes to the Computer Opponent A.I., get used to seeing this screen more often…

    Legends is a fun game still, with it’s flashy effects and nice sounds, not to mention the wonderful Elder Scrolls-style ‘realistic’ art on everything; I personally don’t mind if I am going to be losing to the Computer a lot more; but it would have been nice to see a more obvious notification of it somewhere – or a way to perhaps adjust it (via a Slider or Dial or anything..).

    I do think the AI was ‘just a little too easy’ at first, making simple moves and not many combos, losing a lot more than it won against me – but now it seems pretty darn hard – almost too hard, pulling multi-combos everywhere and buffing cards a lot more and getting ‘the perfect card’ or ‘just what it needs’ at times, to pull off a win (as though, instead of the AI having a prepared set of cards, cards seem now ‘generated as the game goes’, to “keep it competitive”). I can still win once in a while against the AI in Solo Play and Solo Arenas – and I understand that Bethesda might want to make things ‘a bit difficult’ to encourage selling Card Packs; but… Dearest Beth: It’s “Just A Little Too Much” Now… [in my opinion]

    The ‘new’ Computer Opponent A.I. at work, busy buffing its’ cards to no end

    I won’t stop playing, of course – and I won’t stop getting Card Packs once in a while (for all three of the Collectible Card Games mentioned above, when I can) – but I just wanted to mention this, for others too; that if you noticed the Computer seemed ‘tweaked’ lately and is now pretty darn hard to beat as an Opponent in Legends – It’s Not Just You™…

    If I play some Versus matches, which I do from time to time – See You In The Game!

    Addendum
    Changes Seen:
    – Increased Combination plays (Buffs, Debuffs, then Attacking)
    – Increased Healing cards (Health added to Opponent)
    – Highly Increased ‘instant-kill’ or ‘unsummon’ type “Destroy A Creature” cards (Piercing Javelin, Lighting Strike, Execute, Cast Out, etc)
    etc.

    My trip to Delhi and Hyderabad cont…………….

    Today I finished the 3rd Organizational Capacity Assessment (OCA). The first organization was The National Council of Applied Economic Research of India (www.ncaer.org). The second organization was the Indian Institute of Dalit Studies (www.dalitstudies.org.in). The third organization is the National Institute of Public Finance and Policy (www.nipfp.org.in).

    I must say that I have never met a group of such eminent people working passionately as I witnessed in the past 6 days. Most of the people I met for the OCA’s are individually academics of international standing. What struck me most was the passion and the objectivity of their work as well as the humility they show when compared to the major results they have achieved. I wish all not for profit organizations had such an ethos when it comes to measuring there results.

    I have to record the results of the interviews conducted over the last few days as soon as I can as I will be traveling to Hyderabad on the 1st. for the 4th OCA. Tomorrow is the only non working day in this assignment but I guess I will be doing the documentation. Hope I get a chance to finish early so that I can go out for the evening.

    The 1st of March is a holiday in India (festival of colours) and hope I don’t get splashed with coloured powder on the way to the airport.

    Paperless Mission #6: Setting Up GoodReader (iPad)

    This is the sixth post in my Go Paperless! Challenge Series. If you haven’t completed the previous missions, be sure to complete those first.

    • Mission #1: Gather Your Tools
    • Mission #2: Build Evernote Notebooks
    • Mission #3: Email Notes to Notebooks
    • Mission #4: Create Checklists in Evernote
    • Mission #5: Organize Your Files in DropBox

    Also be sure to link up at the Go Paperless! Linky. 

    Mission #6: Setting Up GoodReader (iPad)

    As I’ve mentioned before, I work off a lot of devices. I’m in a 1:1 iPad classroom, but even before my students had access, I had an iPad of my own that I used constantly. I liked having it handy for anything that I was working on, and once I learned about GoodReader, my love for the iPad grew tremendously. I’ve shared some love for GoodReader before, but GoodReader is the ultimate document reader for the iPad. It allows you to read any type of document and annotate over .pdf files. It also syncs with a variety of other apps, allowing you to pull and read all of your important documents into one place.

    Once you have your important documents organized on Dropbox, open up the GoodReader app on your iPad. Here, you’ll be able to connect GoodReader to your Dropbox account. To do this,

    My documents list already has some items and folders listed, but yours will likely be empty. The left column shows all of the folders and documents you have saved in GoodReader (and could therefore access without an internet connection). The right column has all of the utilities for GoodReader. Today, we’re going to focus on the one towards the bottom — “Connect to Servers.” 
    When you click on the “Add” button, you’ll be able to see the many, many connections GoodReader can make. Here are a few highlights:
    • Popular Mail Servers (GMail, Hotmail, etc.) – this connection doesn’t grab all of your emails, but it will allow you to see any messages that have an attachment. This is great for when you’re at a meeting and somebody sends out some documents you need.
    • Dropbox – you can read all of the files that you’ve saved there.
    • Google Drive – view any type of Google Drive file that you have — from spreadsheets to presentations to documents.
    The connection set-ups are fairly intuitive. You will need to name each set up (On some screens that shows up as “Readable Title;” I named mine based on what I was connecting to), but then you simply enter your username. You can also enter your password, in which case it will be saved to the device and you won’t have to enter it again, or you can log-in each time you want to access a document.
    As you can see from my left column, there are a few folders that I’ve downloaded straight to GoodReader so they’ll always be available to me. These are folders that I’m constantly using and want easy access to. I also have it set up so that they’ll automatically download updates to those folders whenever I add more documents to my Dropbox account. 
    Once the folders are set up in GoodReader, you can read the documents, but you can also annotate over .pdf files. I use that feature a lot on my curriculum documents, and I’ve also started doing all of my running records and reading assessments on my iPad. Here’s an example that shows you the annotation tools in the document viewing pane:
    I keep my annotating toolbar pinned on the right side, and there you can see a variety of annotation options that are available — typewriting text, creating “sticky notes,” highlighting, underlining, drawing boxes, arrows, etc., and the last option is the freehand tool. I use this for running records with a stylus.
    One of the best things about GoodReader is that it works well with other apps. Once I finish annotating a document, I can send it to other apps such as Evernote or Dropbox  from the original “My Documents” screen.

    How I Use It

    This is one of my must-have apps because of the broad range of ways it can be used:

    • Turn your iPad into a second computer monitor — When I’m using lots of curriculum documents to write unit plans, I can leave it open in GoodReader with all of my notes and highlights while I work on my laptop or computer. No more switching between screens on my computer. (Am I the only one who finds that annoying sometimes???)
    • Highlight standards that you’re focusing on each term without having to print out (or lose) new documents all the time.
    • Annotate rubrics, running records, and other types of student work
    • Use with students to create paperless assignments

    I’ll be posting more in-depth tutorials about how to do all of these in future installations of this series, but for now, your challenge is to begin exploring GoodReader. Then, in the comment section, share a bit about how you think this app could be useful.

    Spring break starts next week for me, and I can’t wait! I will try to get another installment posted this week, but I make no promises. It’s the end of the term, and that’s always a super-busy time with report cards and grading. I must say, however, that I’m more organized than ever going into this given how much less paper I’m using!

    Have a great week!

    Food Repair Guide: Baking Part 1

    Bread

    Bread, being about the first thing that man made, is also about the easiest. Ordinary bread is only flour, salt, liquid and yeast, well kneaded to mix, and baked. The modern cook with a food processor need not even bother about the kneading (which is only done to spread the yeast really thoroughly through the bread) as the food processor does it all for her. Unless, of course, she enjoys doing battle with balls of dough!

    Ingredients/yeast

    Flours differ but, as long as the flour is of good quality and dry, the differences are a matter of personal taste. Water is the normal mixing liquid and sea salt has a better flavour than table salt.

    If the yeast is fresh and alive, when put in a damp, warm atmosphere, it will rise and grow whether it is incorporated in a dough or alone. Old age kills both compressed and dried yeast, as do extremes of temperature: anything over 110°F/50°C or below standard refrigerator temperature.

    Once the yeast has been creamed by mixing it with sugar and a little warm liquid, it needs only to be thoroughly amalgamated into the dough, by hand or machine.

    Diet Start

    Rising, etc.

    After the yeast has been mixed in, the dough must be left to rise, and in some cases prove. This will happen more or less quickly depending on the ambient temperature, but the longer it takes, the better the bread will be. Elizabeth David, among others, maintains that bread that has been left for 24 hours in a moderately warm kitchen will taste far better than bread that has been ‘hurried’ in a warming oven. However, an hour should be the minimum time — unless you are using a food processor and extra vitamin C to assist the raising.

    If the dough does not rise, it means that the yeast is dead — whether through old age or overheating — and there is nothing you can do about it. Dead yeast has a smell and flavour not unlike dead cats and is totally unrevivable. Throw it out and start again.

    Once you have mastered the basic techniques of bread making, all fancy breads are merely an elaboration on them. Most bakery books are extremely explicit in their instructions.

    Cakes

    Raising agents

    Most cakes use eggs or chemical raising agents rather than yeast. The lighter sponges use whisked egg white; heavier sponges or fruit cakes use whole eggs or a combination of whole eggs and baking powder or bicarbonate of soda. These work by giving off gases when heated, thereby raising the mixture. The more chemical raising agent one uses, the lighter, dryer and less keeping the cake will be. Thus, fresh light sponges or angel cakes should be eaten within 24 hours to be at their best; a rich Madeira cake will keep several weeks; a fruit cake several months.

    Mixing

    The early mixing processes in all cake making are important, be it beating eggs and sugar to a ribbon or creaming butter and sugar for Victoria sponges. In both cases, early and thorough beating ensures that the cake will remain moist. Beating later in the process when the flour has been added will make the cake tough, heavy and elastic. Obviously, beating a light sponge after the egg white has been folded in would defeat the purpose of the operation.

    For cakes that need to hold a filling in place — such as a cherry Madeira where you are attempting to keep the cherries in suspension — do not add all the liquid until you are sure that the full amount will not make the mixture too liquid to support the fruit.

    Packet mixtures

    If you feel that you cannot face the traumas of total cake making, there are a great number of excellent packet cake mixes on the market and you might be well advised to give up the whole business of being a home baker and use one of them.

    Cooking

    Follow the instructions in the recipe (or on the packet) for baking times and temperatures but do check yourself, as your oven may not behave exactly as the instructions say it should. Do not, however, continually open and shut the oven, as you will kill whatever chance the poor thing had of rising evenly in a constant heat. Similarly, when you test it, do not be too vigorous. If a light sponge gets a fat skewer stuck in it, it will break the crust and release half the air being carefully husbanded inside. Press the sponge very gently with your finger and, if it resists, it will be done. A more robust cake will stand the skewer treatment but, even then, do not do it more than you must.

    Turning out

    Whether the mixture is from a packet or home-made, it is most important that you are able to get it out of the tin when it is cooked. Greasing and flouring tins should work but has been known, only too often, not to — especially if the butter was salty! Invest in one, or several, loose-bottomed cake tins, which guarantee complete success — not only for cakes but for pâtés, mousses, jellies or anything else that you fear may lurk shyly in its container and refuse to emerge in public. If the mixture is very liquid, as in a very light sponge, line the tin with greaseproof paper to prevent it leaking out the bottom.

    Speedrun – Hitman: Blood Money – A Vintage Year (Silent Assassin, Pro Difficulty, Suit Only, Targets Only, “No Coins”)

    Messing around trying another Speedrun, this time booting up some good’ol Hitman: Blood Money, “A Vintage Year” level.

    Hitman is a wonderfully crafted, enjoyable game. In my opinion, every single installment in this series has been. People have enjoyed the ‘puzzle-play’ aspects of it, people have enjoyed the gunplay, the stealth. Players have also enjoyed trying to run as-fast-as-they-can through levels that were probably not designed with this intention. Now, Hitman: Blood Money may not win any awards for “realism” in some areas of gameplay, but I personally have something against the concept that an Assassin, wearing a nice suit, most likely a millionaire, is carrying around twenty dollars in pocket change. Heck, I am sometimes annoyed at the jingle in my own pocket of a couple of quarters when I come across them. Thus, my personal aim with this level: to do a Suit-Only, Targets-Only, Silent Assassin, ‘No Coins’ Speedrun (on Professional Difficulty). I am probably not the fastest at this sort of thing, I have only done a couple of intentional Speedruns in the past; but it was still fun to make and I figured it was ‘decently fast’, so I wanted to share. Enjoy!

    Recorded game:  Hitman-Blood Money, First/Third Person Shooter/Stealth/Action
    Recorded with:  Bandicam (Registered Version) @ 1080p
    Recording codec:  MPEG-1 @ 80% Quality (Default Setting), 30fps

    This was actually not as hard as I thought it would be – after finding out that Delgado.Sr is snipe-able up out on his balcony. It was his Son that gave me trouble (as it seems to do with everyone, after a few forum finds on the subject). I started just pushing him down the stairs and also setting up the Barrels to fall on him; but eventually I settled on just a good-old-fashioned-assassin-stand-by: the single bullet to the head. This felt ‘right’, after sniping dear-ol’Dad, anyway. Instead of pushing the Guards at the bottom into the water, I just walked non-chalantly by them, as they didn’t seem to care anyway.
    [On the actual Playthrough, I seem to get some guards’ attention, but I assumed this was for going into the areas I wasn’t supposed to, not for being witnessed killing anyone]

    I also wanted to do things like ‘leave nothing behind’, such as ‘just dropping weapons’ (like the Sniper Rifle) to save time. This sort of stems from the multitude-of-coins thing… Don’t get me wrong by the way, I appreciate the time so many have taken to figure out their own ways to complete Hitman levels by using distractions. I just for some reason [OCD?lol] find it hard to extend my fantasy thinking within the game ‘that far’ – to where a so-called Silent-Assassin-slash-Hitman is always carrying around and actually utilizes enough laundry money to make the homeless cry on every mission. [I didn’t actually mean to rant here, hah] I just think if an assassin wanted to throw anything around to distract guards, it could more realistically at least be a found weapon of some sort, as opposed to a ton of coinage everywhere (pebbles could even make more sense).

    At any rate, whether you use coins (a mechanic that is indeed offered directly within the game) or you don’t, there you have it; not the fastest run [or the most ‘Silent’ lol], but hopefully an enjoyable little watch, nonetheless.

    See you in the games!

    My Trip to Pakistan – Islamabad December 2011

    This is my first trip to Pakistan after 9/11. The last time I was in Pakistan was in 2008, most of the contacts I had made during my last visits have not resulted in any business. However I was able to secure a training assignment which; believe it or not took 2 years to secure. It just goes to show how some clients work. The need for this training was identified over 2 years ago but due to financial and other ground realities they were not able to run the training course in Pakistan.



    The travel plans were made and I set off to Pakistan on the 9th of December. The journey started well as I got upgraded to business class and had a pleasant journey to Karachi. I was scheduled to take a domestic flight from Karachi to Islamabad. Things started to go bad when I landed. I made my way to the check in counter to learn that the PIA (Pakistan International Airlines) flight to Islamabad was cancelled. They just did not bother to contact the agents or the passengers to inform them of the cancellation. The PIA ground staff were however polite and quickly arranged me to stay at the Airport Hotel and take the first flight out to Islamabad on the 10th morning. I had to call my client and the hotel in Islamabad to inform them of the changes to my itinerary. Hurrah to mobile roaming!


    My perceptions of an Airport Hotel were based on the other airport hotels which I had stayed in (Dubai, Bangkok, Amsterdam); however the Airport Hotel in Karachi is another matter altogether. It is a real dump. I am not running down Pakistan or its people as I have stayed in very good hotels in Karachi and Lahore on my previous visits to Pakistan. This was a real house of horror. The rooms were dirty and smelly, the bathrooms were dirty and the dining hall was something else altogether. The table cloths were full of food stains and looked like they have never been bleached since the day they were made.


    The management of this hotel needs major overhauling if it is to be an airport hotel. The staff of the hotel belongs in a farm looking after animals and not in a hotel serving weary travelers. They have no idea of how to handle guest in the hospitality industry.


    I left the hotel early morning (on the 10th) and made my way to the airport to catch the flight to Islamabad. Things ran smoothly from then on and reached Islamabad on time. I was met by the Islamabad Hotel (http://www.islamabadhotel.com.pk/ ) representative at the airport and was taken to the car park to embark on the short drive to the Hotel. In the car park I saw this amazing site of a fork lift being used to move cars that had parked violating the parking rules.

    I settled in at the hotel and met the client in the evening to prepare for the start of the training. The training on Institutional & Organizational Development will run for 5 days with 25 participants.


    The first day of the training went well and the atmosphere in the training room was good and positive the client was very happy at the end of the day and was keen to keep the same momentum during then next 4 days.


    The second day of the training also went along as planned and was well received by the participants. After the training I went to the shops (Jinnah Super Market) with one of the participants as my guide. Islamabad boasts of quite a few good shopping areas with some well stocked shops in clothing. The main thing that struck me is that you do not see poverty on every corner. Islamabad seems to have a majority of middleclass to upper class people living in the city. Quite a contrast to Karachi and Lahore where you do see poverty as it is common in other cities of South Asia.


    The third day of training went smoothly without incident. After the training I met the managing director of a company which I met last when I was in Lahore in 2008. We were unable to build a working business relationship since we last met (9/11, war in Sri Lanka and the deterioration of the security in Pakistan which led to the Sri Lankan cricket team being attacked). We discussed the opportunities for joint collaboration and agreed to take the business relationship to the next level. Only time will tell is we are able to do this.


    The fourth day of the training too went well and we will be going out for dinner with all the participants. We all made our way to Monal Restaurant located about 4000 feet above sea level (http://themonal.com/monal.htm ) at the top of the hill at Margalla Hills National Park for a night time view of the city of Islamabad.

    I recommend to all who visit Islamabad to go for dinner at this restaurant, the view and the food was exceptional and so was the service. After dinner we went to Gelato Affair (www.gelatoaffair.com ) at the Gole Market to have dessert. The ice cream selection available was enormous and great tasting.


    The last day of training went according to plan and was able to conclude the training program on time as planned. The participants were appreciative of the efforts of the trainer and received excellent feedback through the training evaluation. After the customary goodbyes and promises to keep in touch we concluded assignment.


    The trip back to Colombo was on schedule; unlike while arriving at Islamabad the flight back to Karachi was on time and managed to arrive at Karachi without any hassle.

    My trip to Wadduwa

    I just returned home after a 3 day South Asian Regional Workshop on Resource Mobilization. It was a good workshop as it took RM strategies to the next level and looked at operationalizing them. As Strategic Planning / Organization Development consultants we often highlight the strategy for resource mobilization; be it venture capital, angel fund or gearing in the private sector to institutional fund raising and linking with CSR in the development sector.

    What was most interesting was the cases we went through, and going through a logical process which led to ones resource mobilization strategy. The workshop was facilitated by a retired general from the Indian army and he was a good facilitator who kept the attention of a group of 50 people for 3 days. It is important that we as consultants keep up with new trends as well as take time out to reflect on our ability to continually add value to our clients by increasing our body of knowledge.

    We also learned of new ideas and trends in the field of resource mobilization and were very useful given the current global economic situation. Looking forward to taking the learning’s to my clients in the near future.

    I also got a very small project in the financial services industry while I was at the workshop. It is from an old client who has the habit of not giving me too much lead time for projects: there goes my week end. So I am going straight to facilitating a strategy workshop in the financial industry over the weekend.

    Trip to Hyderabad Cont….

    Well there are scheduling issues so will go to get my ticket & visa on thursday. Everything else is back on schedule. Trying to contact some of my friends who are in India so that we may be able to meet over there.

    I have been doing this job since 2002 and travelling overseas since then; however this trip will be my first time on a budget airline. Dont know what to expect? When I got my online booking it said Meal – To be purchased. some how flying and buying your food did not sound OK to me. I am sure that what ever my first choice is it will be over by the time the airline staff get to me.

    Anyway need to finish up all the stuff for today to be able to watch the opening match between Sri Lanka & South frica (ICC Trophy)

    Battlefield Play4Free – PlayTesting The XM8AR LMG (3 Full Rounds – Myanmar, Dalian) Raw Gameplay [Unedited] Gameplay Video

    Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens (now called Play4Free Funds) that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a random draw of eight and it will generate an item for you.

    The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

    I recently won the XM8AR in The Daily Draw (for one day of use) on my Medic and thought I’d try it out and see how it felt and quickly write a post about it [I’ll call these PlayTests]. I am not a gun expert or know a lot about the statistics of the guns, but I will discuss briefly here how the gun actually feels and plays, especially compared to the Medic default, the MG3 Light Machine Gun. I played a few rounds with XM8AR LMG and recorded the first three full rounds. Here they are, shared unedited for you [a ‘Raw Gameplay’ video]:

    Recorded with: Bandicam @1080p (HD) using the x264/H264/AVC Codec
    Recorded game: Battlefield Play4Free (MMOFPS, a F2P game/Microtransactions)
    Recorded levels/maps: Myanmar (Jungle, Assault), Dalian Plant (Rural Industrial Port, Defense then Attack)

    [YouTube did something with the Aspect Ratio of this video and I had to use a command in the Tags section to fix it. Let me know if anyone has problems viewing this video properly]

    Normally locked until Level 15, the XM8 felt great to use on my Level 10 Medic. It’s ammo box is a little smaller at 60 rounds (vs. the default Medic’s MG3 having 80 rounds), but it never felt ‘cramped for shots’ and didn’t feel like it took too long to reload.

    The XM8AR Light Machine Gun is normally locked and cannot be used until your Soldier is Level 15, unless it is bought outright or won in The Daily Draw. Click to see Full Size

    The nicest thing about the XM8 was the accuracy. You could really tell you were going from the “Low” rating of the Medic Default MG3 to the “High” rating of the XM8AR.

    Comparison of basic stats between the default Medic gun, the MG3, and the XM8AR

    Looking down the sights, the three-prong irons of the front sight are quite thin and easy to line up in the view of the rear sight, which is in the form of a circle. There is only a little bit of a pull up and slightly to the right, but the recoil is very small and easy to compensate for once you get used to it. I even felt comfortable shooting from the hip and at a distance because this gun felt so darn accurate compared to the starting weapon for a Medic.

    The thin front prongs of the iron sight feel easy to line up for targets farther away and the XM8AR feels like it is very accurate, as can be seen by this Headshot from across a courtyard in Myanmar. Click to see Full Size

    An all around great gun, it was fun as hell to use for a day. For only 300 Credits you can try out for a day of play, too. If you have 1250 spare Play4Free Funds you can purchase it permanently. It is a nice accurate gun to run with and may be worth it. Try it out for yourself sometime.

    Have fun and See You In The Game!

    Disclaimer: Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material. This information exists for entertainment and educational purposes only and is not a substitute for medical attention.

    Nutritional Strategies for Allergy and Asthma

    SeasSeason allergies to pollen and mold seem to getting more and more prevalent each year with progressively more severe symptoms in sufferers.    Treating allergies with nutrition and nutrition supplements can have big advantages over using medications.   
    Allergy medication most commonly comes in the form of Antihistamines, and there are some big problems with long-term use of these medications.     It is now known that prolonged use of antihistamines decreases levels of acetylcholine which is a key neurotransmitter involved in memory and other important functions.   In fact, antihistamine use increases the risk of senility, dementia and Alzheimer’s Disease.
    What are Allergies Anyway?
    Allergies are abnormal immune reactions to specific agents (proteins) known as antigens/allergens, which include many substances such as foods, drugs, pollens, dust mites, animal danders, feathers, along with many others. 
    Allergies may also develop when an otherwise innocent substance has significant contact with an already inflamed surface (known as sensitization).  For example, when sick with a respiratory illness, respiratory surfaces are already inflamed and substances present at this time may be “remembered” as being foreign.  This can also occur with chemical substances known as “haptons” which are combinations of self and non-self which can lead the immune system to attack the self. 
    Since there are multiple pro-inflammatory substances involved with allergies it is rare to obtain adequate control with single products/medications.  The most potent chemical mediators in allergies and asthma are leukotrienes.  Some leukotrines are one thousand times more potent than histamine as stimulators of bronchial constriction and allergy. 
    Interestingly, many medications that reduce one inflammatory pathway actually boost leukotrienes.    For example, Aspirin and other NSAIDs (Non-Steroidal Anti-Inflammatory Drugs like Ibuprofen) result in the production of excessive levels of leukotrines in sensitive individuals although they decrease prostaglandins associated with inflammation and thereby relive pain.  So long term they can create a much more severe problem.
    Asthma is linked to allergies and can be a severe and life threatening condition.   Do NOT try to self-treat Asthma – see a physician!
    Strategies for Allergies
    Try to avoid allergens by using air filters, regularly cleaning all surfaces and vacuuming and keeping your air-conditioning system on while regularly changing filters to filter out as many allergens as possible.   Remember your car cabin filter as well, and take showers and wash clothes after being outside for long periods of time.
    Change your diet to reduce inflammation.    Dramatically reduce your intake of refined carbohydrate – sugar and starch which drive insulin which drives inflammation.  At the same time increase your intake of low glycemic, organic fruits and vegetables such as berries, broccoli, Brussel Sprouts, etc.   These plant foods contain polyphenols which are potent anti-oxidants and help to reduce inflammation and allergies without side effects.
    Boos
    Increase your intake of Omega 3 Fatty Acidsfrom cold water fish such as Alaskan Wild Salmon and/or take an Omega 3 Supplement such as Krill Oil.    Omega 3 fatty acids will always reduce inflammation if taken in sufficient dosages so this should be a primary strategy for allergy sufferers because they produce many side benefits.   The only exception is people taking any type of medication to thin blood and reduce clotting like Coumadin.   In this case the combination can be dangerous!
    Nutritional Supplements for Allergies
    There are several highly effective nutrition supplements for allergies including some key herbs.
    Local Raw Honey – it MUST be local and must be raw because it will contain small amounts of local pollen and works by getting the body used to pollen much like an allergy shot.     A Tablespoon a day is as much as you need.   Many people swear by this simple and safe remedy!
    Stinging Nettle Extract – this herb has a long history of effective use for allergies and freeze dried preparations seem to work the best and are best taken BEFORE allergy season even begins to put a damper on symptoms before they start – this is true of all nutritional approaches to allergy by the way!
    Euphrasia Officianalis – aka “Eyebright” is an herb which name says it all – it is highly effective for eye allergy symptoms.
    Quercetin – is a flavonoid contained in high amounts in apples, peppers, red wine, dark cherries and berries, tomatoes, cruciferous vegetables such as broccoli, cabbage and sprouts, and raw red onions.   To treat allergies taking supplemental quercetin is the way to go, and the best form of quercetin is contained in a product called “AllQlear” by Integrative Therapeutics and can be purchased on Amazon.     It also contains “ovomucoids” from quail eggs that act as tryptase inhibitor and prevent release of histamine.
    Boswellia Extract – Boswellia aka Frankincense (yes the herb mentioned in the bible!) can be highly effective for allergies and other forms of inflammation including arthritis because it blocks the formation of leukotrienes!    To get the benefits you must take 5-loxin which is a specific extract.   Note that in some individuals 5-loxin can cause or excacerbate heart burn so it is not for everyone, but when it works it can be highly effective!
    Butterbur Extract – this plant extract can be highly effective for inhibiting leukotrienes and allergy symptoms or side effects.   You need to take a standardized extract with standardized levels of Petasin and Isopetasin) and free of Pyrrolizidine Alkaloids aka PA.  High quality brands include Life Extension, Swanson, and Enzymatic Therapy to name a few.   This product can also help many migraine sufferers and is a well-researched, proven treatment.
    NAC – N-Acetyl Cysteine – helps thin mucus naturally and boost levels of the body’s most important antioxidant Glutathione – every allergy sufferer should be taking 600 – 1,200mg per day!
    You will also find combination of these ingredients in particular products, and it is worth experimenting a bit because if you find the right product or combination of natural products you can find relief without sedation and without the side effects associated with antihistamines and more potent drugs like steroid nasal sprays or oral steroids.

    My Travel Tips

    I started traveling as a consultant form April of 2002. I have now completed ten years of travel. For my assignments I travel both economy and business class and use a variety of airlines. To commemorate my ten years of traveling I have compiled some travel tips. They are aimed at reducing the stress of modern travel to enable you to have a pleasant journey with the minimal amount of discomfort and hassle.



    These are my top travel tips based on my travel experience since 2002 and the post 9/11 world. (E6K9HKXKPPNE)


    Clothes and shoes


    1. Do not wear a belt – this will help you to pass through security without having to go through the hassle of taking it off and putting it on. It also helps in blood circulation.


    2. Do not wear any items of clothing which contain metal buttons, clips, labels etc.


    3. Do not wear clothing with a lot of pockets – you can forget a coin or a key and will set off the metal detectors


    4. Do not wear tight clothes this will cut your blood circulation and make the journey uncomfortable.


    5. Don’t wear baggy clothes; wear comfortable cloths that are close to your body – lets face it you will be profiled no matter what they say; so wearing baggy clothes sets off alarm bells with the security personnel. They are more likely to pad down a person wearing baggy clothes as opposed to someone wearing well fitting clothes.


    6. Try to wear slippers or sandals, if you feel clod wear a pair of socks with the slippers or sandals. If you need to wear shoes wear thin sole shoes (without any metal fittings) with no shoelaces. This will either negate the need to take off your shoes or make it easy to take off and put on shoes


    7. Try to dress in the thinnest possible layers of clothes instead of wearing / carrying bulky heave jackets / coats so that you can remove or add depending on your level of comfort. Thin clothes weigh less take less space in your hand luggage / carry on luggage.


    Money and Travel Documents


    1. Do not carry any coins. If you must carry coins in a small transparent plastic bag and put the coins in a pocket of your carry on luggage.


    2. Always carry more than one currency: example if you travel via to London to USA carry British Sterling Pounds as well as Dollars.


    3. Try to pre pay for as many expenses as possible before departure. This helps to minimize the amount of money you need to carry, as well as be able to bargain to the maximum and not be made to decide on the spot about your travel options. Use the internet and always cross check and read reviews of restaurants, taxi service and other services you are likely to pay for in cash so that you don’t get taken for a ride.


    4. Carry globally accepted credit cards as a payment option and for emergencies.


    5. Always take travel insurance; you never know when you might fall sick or get injured.


    6. Always carry your passport, visa, travel insurance, hotel reservations, travel vouchers, invitation letters, letters of sponsorship etc in one safety pouch / folder. This way you don’t have to look for them in multiple places. Keep them safe and close to you.


    7. Never ever give the bag containing these documents to anyone (except your family or personal assistant / colleague).


    8. If you are using a VIP service to breeze through emigration and customs make sure that you have line of sight of the person at all times. Confidence tricksters pretending to be service providers will walk off with your belongings.


    Baggage


    1. First check the weather of your destination (12 hours before departure – weather forecasting gets better when nearer to the dates concerned.)


    2. Finalize your clothes 12 hours before you travel, based on above.


    3. Choose clothes that can be mixed and worn: Take white shirts / blouses which can be worn with any pants / skirts and jackets. Take a few different ties / scarf and accessories so that you look different but use the least number of clothes. I am a firm believer in the use of hotel laundry services. I prefer to get the items laundered at the hotel and avoid carrying your entire wardrobe with you when you travel. Make sure that you as well as the hotel has a clear understanding of the difference between dry cleaning and washing of clothing items.


    4. Try to use the minimum number of bags as possible.


    5. Golden rule is that: if you do not need an item during the journey / flight, then it goes in with the check in luggage. One of the benefits of the post 9/11 world is that the airline industries ability to track and link you baggage to you has improved tremendously. So you do not have to carry any back up clothes in your hand luggage just in case your luggage gets lost.


    6. If you do not have any check in luggage then you need to ask the question do I really need to carry the item or can I buy it at my destination and use it. Remember most consumables (Soap, Shampoo, Mouth wash etc) are similarly priced everywhere and most hotel now provide them in the room). It’s worth trying a new brand of an item to reduce the weight and hassle of taking them in 50 ML clear bottles etc.


    7. Have a good idea of your baggage allowance. Especially if you fly economy class; it may change from airline to airline. The rule of thumb is that if it is difficult for you to carry your check in baggage (Standard international size) it is probably over weight. An average person can easily handle 20Kg. Use this principle when standing in check in queues. Avoid standing in queues with people who have difficulty in handling their luggage. They will take longer to check in as they will have to pay for excess luggage or repack them.


    Loyalty Cards


    1. Try to get as many loyalty cards as you can. Before you embark on your journey have the relevant loyalty cards sorted out and keep them with your travel documents and put the rest in you carry on luggage. You never know when they may become handy.


    2. In my opinion the top benefits of loyalty cards are:


    a. Priority check in – the shorter the queue you need to stand in the less stressful it is to you.


    b. Excess baggage allowance – you never know when you might need it, especially if you travel with your wife / partner who will shop while you are attending to business.


    c. VIP services for priority emigration and customs clearance.


    d. Access to a lounge with free broadband internet connection


    I recommend you go for loyalty cards that provide at least one of these benefits and not bother with ones that just offer air miles for ticket discounts and free food.


    Hotels


    1. Where ever possible I recommend you insist on staying in an establishment with at least a 3 star classification. This should provide good enough comfort & facilities for a business traveler. However I have come across many hotels which are classified as 3 stars but are more like cattle sheds. If clients and budgets permit always stay at the highest class hotel in your destination.


    2. The main facilities you should be looking for when selecting a hotel are:


    a. Airport pick up and drop


    b. Free broadband internet access


    c. Complementary pressing of one set of clothes per day (shirt / blouse, trouser / skirt & Jacket) + shoe shine.


    d. Free copy of the local English newspaper – This is a helpful tool to get a feel of the local environment, best places to dine and entertainment information and of course to get an insight in to what’s happening around you.


    3. Always stay as close as possible to your customers / clients. This will reduce local travel time and getting stuck in local traffic, which you may not know about or will not be able to find out before arriving at your destination. Best is to stay within walking distance. By this you can avoid the need to haggle with taxi drivers every morning and evening if meter taxis are not available.


    4. I recommend you stay on B & B basis; this gives you a lot of flexibility to move around the city and meet the locals during meal times. This will also help you get a feel of the general business environment, mood of the people as well as get exposed to the local culture.


    Flights


    1. Always use major airlines where possible. The trend now is to go for budget airlines. I too subscribe to this philosophy but with a few considerations. They are:


    a. Safety – As with all one needs to be comfortable with the safety systems of the airline. Some budget airlines operate state of the art new aircraft, while others operate others which do not have a good safety record. So each of us need to make this choice for ourselves.


    b. Reliability – Other than Europe and North America budget airlines are not regulated in a way they are liable for delays and cancellations. Unless you have a very good insurance policy you may run the risk of having to incur the cost of delayed and cancelled flights, additional hotel and transfer costs. Budget airlines will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    Major airlines will operate scheduled flights, and if for any reason they do cancel a flight they will look after the passengers better and try to route you to your destination with the minimum hassle.


    2. Try not to use domestic airlines. As much as possible try to get to and from your destination via an international flight. Changing to domestic airlines may be cheaper but you need to consider the following:


    a. How much time do you loose and is it worth. Most domestic flights operate at much lower altitudes and will fly at a lower speed. International flights will fly higher and faster and can provide you with considerable time savings.


    b. You may have to go through immigration in one airport and through customs in another airport. This may actually take a longer time.


    c. You will increase you total transit time (Time spent not flying) and for a business person time is money.


    d. You may need to move your luggage over long distances between domestic and international terminals.


    e. You may need to pay again for excess baggage


    f. Domestic airlines too will cancel / delay / amalgamate passenger manifests for flights if they do not have the desired number of passengers for a flight to minimize losses.


    g. Most domestic airlines operate very old aircraft which may have a bad safety record.


    Jet Lag


    1. Living in the destination time zone – From the time you start your journey try to do things such as taking meals and sleeping according to the destination time zone. This will give your body extra time to adjust to life in the new time zone. Most airlines try to do this using the cabin lights to mimic the time of day. Unfortunately only the modern aircraft have this feature.


    2. Drinking fluids. – You must be well hydrated 24 hour before the flight, So refrain from:


    a. Heavy exercises that make you loose water through excessive sweating


    b. Drinking too much alcohol the day before you travel.


    3. Reduce the build up of static electricity on your body and clothes. Once at your choice of accommodation at your destination find a wooden or cement / tile floor. Take off your shoes and socks and walk on the surface for a few minutes. The best solution is walking on grass however this may not be possible at your destination. However this may be an option for you on your return to your home.

    Sample Dining Room Minimalist Design Idea

    Sample Dining Room Minimalist DesignSample Dining Room Minimalist Design

    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    Sample Dining Room Classic DesignSample Dining Room Classic Design

    Sample Dining Room DesignSample Dining Room Design
    Sample Dining Room Elegant DesignSample Dining Room Elegant Design

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    Matryoshka House was designed by architect David Jameson, is located in Bethesda, Maryland, USA. Obeyng unwritten rules concept Matryoshka, the house consists of a series of volumes is one inside the other. According to ‘description’, architects, in essence, a meditation room with suspended center acts as the physical and spiritual for the project. The internal energy market of the meditation room locked in an open, bright. Alternating tread stairs rise participant commits deliberatley eve of the meditation room. The meditation room is surrounded by a wooden container that surrounds the living area of ​​the house. Traditional decorations in turn should have soothed by stucco walls act as a protective layer and ground floor of the house. In-between space of nested volumes strategic cup sun to protect lines of light inside.

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY DINING ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL MEDITATION ROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    MATRYOSHKA HOUSE MODERN DESIGN & SPIRITUAL SIMPLICITY BATHROOM

    HOW TO DECORATE A KITCHEN MINIMALIST

    A café is a place where people meet, talk and relax. The ambience of a café is loved by many people and that is why many of them visit one daily after work so that they can talk and share things with their friends and relax after the long day. One can decorate their kitchen with a café theme so that they have a coffee shop at home, or they feel the same. Creating the same theme as that of a coffee shop is a brilliant idea to add a different touch to the kitchen and make it nice and cozy also.

    Minimalist Decorate a KitchenMinimalist Decorate a Kitchen

    Decorating the kitchen with a café theme is not at all difficult or expensive as many would think it to be. People have two options when they want to incorporate a café theme; they can either completely change everything in the kitchen or they can use what is there, and use it and still create the theme. The things that one can use along with the colors and the final touches, is what matters the most.

    A basic thing that one can add to the kitchen which will be useful also and will also help to create the café theme is to use a table with four chairs in the space. The chairs should be comfortable and for this one can add cushions to it. The table should not be crowded with too many things and under table you can opt for a modern carpet or rug.There are several types of these rugs you can get including wool area rugs, contemporary rugs and even discount area rugs that you can find online.The other thing that one can do easily is to paint the walls of a different color. The color should be bright and be chosen keeping in mind the natural light that comes in the kitchen.

    Near the table that one keeps in the kitchen, one can place a book shelf and place some nice coffee table books or books of art and poetry. Another thing that can be done to create the café theme is that one should only be able to see things related to a coffee shop in the kitchen. The table should only have sugar and coffee beans etc, the counters should only have the appliances that are used in a coffee shop like the blender or the coffee maker. It is not that the kitchen cannot have other useful appliances; all that one needs to take care of is that these should be kept in the cupboards and should not be seen as this can ruin the café theme that one wants to create.

    KITCHEN FURNITURE DESIGN GENAH MAK NYOOOZZZ

    The first thing to remember is that the kitchen is a very functional piece, but do not want to look that way. You can purchase kitchen furniture that is warm, welcoming and friendly to both practical and effective. For example, you can choose from a variety of carts microwave carts or beautiful kitchen that fits well with the decor of your kitchen. They also give him the space to display items or the space room that can hold pots and other utensils. A kitchen island is another element that gives additional working space, but with the addition of a few bar stools that can transform a functional kitchen in a comfortable and welcoming.

    Kitchen Furniture Design

    Kitchen Furniture Design

    Kitchen Furniture Design

    Kitchen Furniture Design

    Tom Monaghan, founder of Dominos Pizza, and car collector had a lot of cars in his world

    The first Domino’s “Javelin” official delivery vehicle being delivered to Tom Monaghan in 1969.

    When Monaghan only had a few stores, he had red, white, and blue AMC Javelins for delivery cars.

    When he and his brother started out in pizza delivery, they had a beat up ’59 VW bug, and when his brother wanted out of the company/business/partnership… he got the car as a settlement

    His dad died when Tom was four, and his mom put the boys into foster homes that didn’t work out, then into a catholic nun orphanage. After 6 years she got her life together and thought she’d be able to care for her sons and found out, she wasn’t parent material, then committed the boys to juvie.

    In his teens, Monaghan had been a penniless car buff; then he joined the Marines, went into pizza after his discharge and dropping out of college, acquired a fleet of automobiles, including a handmade Bugatti Royale, the Type 41 1931 Bugatti Royale Berline De Voyage, and the Packard that conveyed F.D.R. to his second inauguration.

    Because he liked to fly, and get to meetings about franchisees faster, he bought a Gulfstream jet and a Sikorsky S-76 helicopter.

    He had at least 3 annual antique engine shows on Domino Farms, the event featured eighty-six exhibitors of steam and gas engines, related paraphernalia and other contraptions. Also featured were classic cars from the Domino’s Pizza collection, two steam launches including the Olde English ‘D’ owned by Domino’s and a steam powered boat called Steamer Telegraph, owned by the show’s chairman, Jim Monaghan.

     When his pizza franchises took off, he built a 244-car collection, bought the Detroit Tigers, and became the owner of the largest Frank Lloyd Wright collection in the world. He was worth 480 million.

    Eventually, he decided to sell everything. He got rid of his cars, yachts, planes, and baseball team, and in 1999, he sold Domino’s to Bain Capital.

    one of the cars in his collection was the Barris AMX 400

    another was a Model J Duesenberg he bought for a flat million

    http://www.hotrod.com/articles/ccrp-0705-amc-amx/
    http://mentalfloss.com/article/65604/11-facts-about-dominos-pizza-founder-tom-monaghan-30-minutes-or-less
    https://www.newyorker.com/magazine/2007/02/19/the-deliverer
    http://people.com/archive/tom-monaghan-vol-32-no-13/
    https://www.nytimes.com/1999/02/14/business/taking-the-gospel-to-the-rich.html
    https://www.hemmings.com/blog/2011/03/20/sia-flashback-million-dollar-duesy-harrahs-auctions-over-300-cars/
    https://www.farmcollector.com/steam-traction/dominos-farms-sponsors-third-annual-steam-engine-show

    How Much Protein Do You Need Each Day?

    One of the most controversial and confusing aspects of nutrition is how much protein people should consume each day.    There are several factors to take into account to get a good answer to this question, and there are potential problems with eating too much protein.   There are also definitely problems with not eating enough protein.  It is also important to consider what type of protein is being consumed.
    Height, weight, age, sex and activity level all factor into your protein needs.   Obviously the larger you are the more protein you need to take in to support structural proteins throughout the tissues of the body including the muscles, bone, skin and organs.  In the same way the more active you are the more protein you need to consume.  In addition, protein is used to create enzymes, and enzymes are critically important for all cellular function.
    Protein is made up of amino acids and there are essential and non-essential amino acids.    Essential amino acids MUST be consumed because they cannot be made by the body.    Complete proteins contain all the amino acids and come from meats, poultry, fish, eggs and dairy.   While vegetarian proteins are not complete it is not hard to combine different plant protein sources to obtain all the protein the body needs to function.
    Other factors which influence how much protein is required is overall caloric/energy status.     If you are eating enough calories to maintain bodyweight or gain bodyweight you require less protein as a percentage of overall calorie intake while those people in caloric deficit require a higher percentage of their overall calorie intake to maintain lean tissue mass (losing lean mass like muscle is usually NOT a good idea so this is important).
    How much is too much?

    In large amounts and for certain populations (such as those with compromised Kidney Function) excess protein can cause problems.    That being said, for the normal healthy individual, the body can easily and safely process and use a lot of protein.    A portion of the protein you eat is frequently converted to glucose (blood sugar) and if your overall calorie intake is too high you will convert excess protein into fat like ALL unused excess calories.
    Another potential problem with too much protein is that high protein intake stimulates the release of mTOR which stands for Mammalian Target of Rapamycin.    mTOR is a key regulatory protein that signals for cell growth through the creation of new proteins. Consider protein building similar to a race car. The larger the engine, the greater potential for speed. Similarly, the more mTOR present in any given cell, the greater potential for more protein construction. And just like the gas pedal fuels the engine, mTOR is a signaling protein, and can be various levels of active (like a pedal’s ability to regulate speed). If a number of different processes all signal for ‘Go’, then the cell builds as much protein as it can, as quickly as it can. So just as a souped-up car takes off rapidly, a muscle cell can signal for tremendous muscle growth very quickly, given the right conditions.   n
    For this reason, mTOR is a good thing when you are looking for muscle-building!  However, there is a potential dark-side to mTOR.   Cancerous tumors are designed to grow as fast as possible, and they rely on mTOR signaling to build proteins just like healthy cells.   So too much mTOR could theoretically put people at a higher risk of developing rapid and serious cancers.  In fact, a lot of cancer research is based around slowing down and minimizing mTOR activity in tumor cells (the exact opposite goal of muscle research).
     
    This doesn’t necessarily mean that eating more protein for muscle building is going to cause cancer. Numerous other proteins and factors come into play, and some may respond differently in muscle cells than in cancerous cells.
    Safe and Adequate Protein Intake

    The Institute of Medicine’s protein RDAs are calculated using 0.8 grams of protein per kilogram of body weight. This means an adult who weighs 68 kilograms needs at least 54 grams of protein each day. The RDA for pregnant and nursing women is 71 grams of protein per day.  Keep in mind the RDA is a MINIMUM and does not mean this is ideal!   This also assumes you are sedentary!   So, if you are exercising and trying to build muscle or older and trying to prevent muscle loss higher protein intake is better.  To determine your minimum daily intake, divide your body weight by 2.2 to determine your weight in Kilograms and then multiply by .8 to get your minimum daily protein intake.  
    The Academy of Nutrition and Dietetics states that although athletes only need about 1 gram of protein per kilogram of bodyweight to maintain muscle mass, they require 1.4 to 1.8 grams of protein per kilogram to build muscle mass; this is equivalent to about 0.64 to 0.82 grams of protein per pound of body weight each day.

    CONCEPT INTERIOR DECORATORS NYC

    Interior Decorators NYC

    Interior Decorators NYC, there are many different benefits to live. Here, culture, food corners, training, and last but not least, the lounge and bar. If you want to spend a night in the city that never sleeps, then to New York City is a great bar, club and lounge, in particular to go. There are several rooms, and also spread throughout the city. live musicians are the best features of these lounges and bars. You can find indie rock band a lot of volume, and other local bands. Part of the show in New York City, a tremendously well. They are tastefully decorated, and the crowd, which is very appealing. These amazing living space in this late night to win the House, hip hop and youre likely to find one that will fit your musical taste.

    They offer large crowds and expensive liquor and very elegant. The interior decoration of these rooms are for lights, big boost mood of the series, in fact, people also benefit from seeing the crowd warm with loud music and too much light. Interior Decorators NYC always find some very funny and what’s better than a bar, club lounges and especially where you can make your night of fun. Once your stomach is full with the best drinks in the theaters of New York, then is time to rock and roll music and if so, what better than a living room and also in New York, where fun begins.

    In addition, these shows are also very useful during the time of the wedding reception. People are now tired of planning parties in hotels and other places. now part of wedding reception is poured into large halls, where people enjoy the maximum level. New York reception halls are simply incomplete without drinks. Here you can plan a cocktail, and also a bachelor party incurred prior to marriage. You can enjoy unlimited drinks which is great taste and you can also enjoy the loud music here. This part of reception or a cocktail can be fun with friends and other relatives. You know some reception includes dancing and fun, and this is the basic ingredient and that is what makes a great party for everyone. It is therefore the reception of the show is so famous in Interior Decorators NYC.

    Interior Decorators NYC
    Interior Decorators NYC

    EUROPEAN STYLED DESIGN IDEAS BATHROOM

    EUROPEAN STYLED DESIGN IDEAS BATHROOM

    If you are looking for the best images of the sample of European-style bathroom designs, and applications of a modern sauna and gym. Here are sample images of European inspired bathroom design ideas for the home. European influence in a bathroom attached to the right furniture, cabinets bath faucets, vanities, and tile e. As well as their luxurious and spacious sauna Finish Head (European company based in Germany) in a corner, the rest of the spacious bathroom, as the essay should be dedicated to wellness and keep beautiful. Room with a bright red Finnish sauna focuses on physical fitness, also welcomed the formation of large area white cushions and fitness equipment attached to the wall. It makes sense that this is quite large, walk-in glass shower. If you have more time, is set beside a white bath has a sauna, in front of two large floor to ceiling windows.

    The second room is here in a Finnish sauna takes gentler approach – offering a job to escape from their mental well-being of the outside world. solarium luxury, you can pull out in front of a soothing fire. Wide bubble bath, shower and steam bath in a wooden soaking dip to give you a variety of bathing options. You can easily live in the house of a modern European hits with a private bathroom attached.

    EUROPEAN STYLED DESIGN IDEAS BATHROOM
    EUROPEAN STYLED DESIGN IDEAS BATHROOM
    EUROPEAN STYLED DESIGN IDEAS BATHROOM
    EUROPEAN STYLED DESIGN IDEAS BATHROOM

    BEDROOM INSPIRATION DESIGN STYLE AWUTAN

    Bedroom Inspiration Design

    Bedroom Inspiration series today, I decided to post some new designs that room I found in my daily online surfing. Here are the last 5 new chamber design that come in our bedroom inspiration series, now at number 7 If you want more inspiration room, you can start from here and keep the links in these posts.

    Bedroom Inspiration Style

    Bedroom Inspiration Modif

    Bedroom Inspiration Awutan

    Bedroom Inspiration Mantrap

    INCREDIBLE HOME DESIGN WITH NATURAL LIGHT

    This 94 square meter apartment has a privileged location on the corner of the building. Looking for an apartment in well appointed with three bedrooms, one next to the park, with open views to the outside and green space overlooking the street, while the kitchen opens onto the courtyard and peaceful atmosphere. In the middle is a spacious hall and in relation to this, a new bathroom. The general plan with large windows on three sides and bright colors fill the room with light. It is difficult to decide which of these rooms, we love the most.

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE LIVING ROOM DESIGN WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN DINING ROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN KITCHEN WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN BEDROOM WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    INCREDIBLE DESIGN SKETCH WITH NATURAL LIGHT

    My Trip to Vietnam

    I am on my way to Vietnam for an organization capacity assessment of a multilateral organizations’ branch office as well as their partners. I had few tense moments in getting my visa on time but everything worked out. This will be my third trip to Vietnam; my first trip was back in 2005, my second trip was in 2007.

    The first trip was to train the senior management of the largest ministry in Vietnam on Sector Wide Strategic Planning. I recall that my liaison officer was very hospitable and took me around Hanoi every night. I had to sample the snails, frog, cat and dog in a variety of restaurants, washed down with copious amounts of snake wine. It was one of the most memorable assignments for me and I made a lot of friends there.

    My second assignment in Vietnam was to train and conduct an organization capacity assessment along with the senior management of a ministry in PDR Lao. As a perk to the staff the training was moved from Vientiane, Lao to Hanoi, Vietnam.

    Doing a Strategic Plan / Organization Assessment in a communist country is quite different. There is no Institutional landscape for you to influence or lobby. There is the communist party line and laws and statues based on them; everyone has to live within these boundaries. Influencing and lobbying can be considered political subversion and it is not practiced by organizations. Even when dealing with the private sector you and your competitors have to live and operate within these bounds. It can be argued that this is indeed a very controlled level playing field.

    I am looking forward to doing this assignment.

    Getting Started with a Flipped Classroom

    Last week, I shared a bit about why I flipped my classroom, and I got some great questions! Today I want to share a bit more about my process and the logistics for flipping. There are lots of ways to do it, and I’m sure there are many other great ideas out there, but this is what has worked for me so far.

    1. Plan your lessons 

    a) Does it make sense to flip?
    You don’t want to flip for the sake of flipping. I always ask myself, “Would this lesson make sense as a flipped lesson?” There are times when some introductory lessons require lots of hands-on scaffolding, and my answer might be “no.” But other times, when the lesson is mostly information and practice, the flipped model absolutely makes sense.

    b) What content must be covered?
    I go through my math lesson plan, and determine the content that has to be covered in the video. I’m really selective about this because I want my video to be less than 10 minutes long. It’s still a mini-lesson, after all, and if I go any longer than that, my students will tune out. Plus, even though the video may be 10 minutes, the viewing time could be much longer than that if students are pausing the video to write things down or take notes. I try to keep in mind the idea that less is more.

    c) Am I the best person to deliver the content?
    Usually my answer is “yes,” but not always. I’ve tried to share videos from Khan Academy or LearnZillion in the flipped model, and the kids just didn’t respond as well to those. They’re more likely to tune in when the video is made by their teacher because they have a personal connection. There were a few times when I’ve used someone else’s videos because the production was significantly better in some regard (e.g., it included songs or humor that I couldn’t pull off). But usually, I make the videos myself.

    2. Choose your tools

    Once I know the content of my lesson, I decide what method I’ll use to produce the video. I choose from a few different options.

    a) Screencasts
    Sometimes I have a presentation already created in a flipchart for my ActivBoard, and I can just film my voice interacting with my computer screen on that. My favorite tool for screencasting is Screencast-o-matic. It’s very user-friendly and it uses a yellow circle to highlight your mouse so students know where to focus their attention. The free version works well, but for $15/year, you can get lots more editing and uploading options. If you’re interested in screencasting, I would recommend trying out the free version for a while to see if it’s something you’d like.

    b) Whiteboard apps
    Usually I use whiteboard apps such as Explain Everything or Educreations to make my flipped lessons. I always create the slides in advance so that I don’t waste precious recording time writing out problems or building models that could simply be explained. Then once all of the slides are in place, I’ll record the audio over them. This approach also allows me to work in pieces, too, because I never know when I’m going to get interrupted.

    c) Paper slide shows
    I’ve blogged about paper slide shows before here. Sometimes the lessons are a bit more hands-on (e.g., using a protractor), and I want to show students some examples. In those instances, I use my DEWEY Document Camera Stand ($120, www.copernicused.com) that turns my iPad into a document camera, and I work and film underneath it. I mostly use this approach with Geometry and Measurement standards, but when I need to do a lot of physical manipulations, the paper slide show works well.

    3. Choose your platform

    Once I’ve made the video, I need to upload it to a platform for students to view. YouTube is blocked for students at my school, so I use Vimeo instead. I ended up buying a Vimeo Plus subscription last year ($59.95/year or $9.95/month). That gave me much more space for uploads each week (5 GB vs. 500 MB with the free version), and it sped up my upload times, so it was worth it to me when I was crunched to get the videos uploaded after school. I created a channel for some of my videos, and now I’m going back to re-make some or better tag/organize the videos for each unit.

    4. Share your content

    Once the videos are uploaded on Vimeo, I needed a way to share the links to the videos. When I started, I was posting the links after school each day, but I eventually cut out that step. Now I make one Google Document each term with all of the dates and lesson topics, and then I just copy and paste the links into that document as they’re done. That helps my students because they find the video links in one spot, and I can post the links as they’re available. Here’s an example of what that document looked like one term.

    Bonus Tips

    1. Make your videos in batches. 
    I found it much easier to make all of my videos for the week at once. I could usually tackle this in a couple of hours each week, and it was much less stressful than trying to film every day. I was able to find my rhythm with the process when I batch-produced videos, so that’s how I try to work now. 
    2. Start small.
    Even if you only make one video each week, you’re still starting to build a library of flipped lessons for future use. I didn’t make as many videos as I’d wanted to last year, but I’m grateful for the ones I already have done because that’s less work I’ll have to do this year.
    3. Divide and conquer.
    See if someone else on your grade level team would be interested in flipping with you, and then divide up the lessons. Even if you’re not the one teaching the lesson in every video, the students will appreciate it being someone they know. 
    4. Get some cheap .mp3 players for student check-out.
    Most of my students had Internet access at home to watch the videos, but a couple didn’t. I wrote a grant to buy 10 inexpensive .mp3 players that students could check out to watch the videos. They didn’t require an Internet connection because I saved the videos straight to the hard drives, and since they were cheap .mp3 players (<$20 each), they didn’t have any bells and whistles to make them targets for theft. It was a workable solution for those students who lacked technology access at home. 
    Next week, I’ll share more about what my math block looks like under the flipped model. Until then, I’d love to hear from you. What are some tools you use for video production in your class? What challenges do you foresee with a flipped model? Share your thoughts in the comments section.

    WORKOUT ANYTIME on FOX 56 Lexington

    WORKOUT ANYTIME on FOX 56 Lexington

    Head Trainer Carl Flotka of WORKOUT ANYTIME Lexington was recently featured on FOX 56 Lexington. In the segment Carl talks about how to portion control during the holiday season and highlights a few exercises that viewers can do to stay active.
    View the full segment here.

    Quality Test – MSI Afterburner’s MJPEG Implementation (Part I) with Hitman: Absolution (Ultra Settings, 1080p)

    Update: Added screenshot example of the RTV1 codec ‘color banding’ issue, with circled areas¹**
    Update: Added Quality Test Comparison (Four 1080p samples of Hitman:Absolution) at different Quality Settings²**

    Recording with the MJPEG (Motion JPEG) codec, every frame is an independent ‘Keyframe ‘or ‘I-Frame’ (short for “Information Frame”), which means it is a type of frame that can be ‘cut’ or started from in video editing programs (technically, every frame is a JPG picture!). This also allows for faster seeking and rendering in editing applications. MJPEG also requires less overhead (better performance/less ‘lag’ while recording) than many codecs. As well, the audio captured is PCM (“Uncompressed”) with MSI’s Afterburner, which means that any video editor should be able to recognize the sound data. Errors in programs like Virtualdub saying “Error initializing audio stream decompression” or Sony’s Vegas showing “Stream attributes could not be determined” will not occur and these will open the audio without associated problems.

    Testing out MSI’s Afterburner as a game recorder and using the built-in MJPEG codec that comes with the program, I fired up some Hitman: Absolution, turned up everything to Ultra, captured some clips and put them together, uploaded it to YouTube, and collected some results with everyone:

    This video compilation is a test of a few things:
    1) Hitman: Absolution’s performance while maxed out (Ultra Settings in game Options)
    2) Capture quality of MSI Afterburner and performance/lag of using it
    3) H.264/AVC compression quality maintainability
    4) Youtube’s quality maintainability

    Recorded with:
    MSI Afterburner
    – v.2.3.0
    – MJPEG codec, “Full Frame”, 80% quality, 30fps
    – Audio automatically records into PCM (“Uncompressed”) format

    Recorded Game: 
    Hitman: Absolution @ 1920×1080 (1080p)
    – “Ultra” settings (Preset)
    – Anisotropic Filtering set to 4xAA
    – “Texture Filtering Quality” set to High Quality (i.e.Off/NoFiltering) in Control Center

    – “Morphological” Anti-Aliasing (MLAA) setting (AMD/ATi) set to ON
    – “Surface Format Optimization” set to OFF in Control Center (AMD/ATi)

    Framerate while not recording: ~31-79fps
    Framerate while recording: ~28-64fps

    I chose some Hitman: Absolution clips for a Quality Test because it was a good example of a recent game (at the time of this writing) that includes both fast movement/action areas on the screen, as well as slow/non-moving parts, including text. It has lots of dark and light areas, high contrast edges, particles (rain/filmgrain/sparks,etc) and tests area panning as well.
    I was impressed with MSI Afterburner and it’s utilization of the MJPEG codec overall. It seems to be slightly optimized or tweaked somewhat. At 80% Quality (to be in the realm of comparison with Bandicam’s MJPEG Preset Default of ‘Quality80’), flatter/darker parts were not overly compressed – which would create excessive macroblocking and/or be too smoothed out, normally. This could be partially due to the ‘Film Grain’ effect within the game, however (seen mainly when the sky or a flat-coloured background is in view).
    In other words, there was very little Gibbs Effects aka ‘Ringing’ (“mosquito noise”) around elements such as text when onscreen, and what effects were there, were ‘hidden’ somewhat by the grain effect. You had to look closely to see it, which is still pretty good for not recording in a 100% Quality setting – but again, the ‘Film Grain’ effect in this game is contributing to this ‘negative effect of the MJPEG codec’ not being as visible.

    A small amount of Gibbs Effects/Mosquito Noise/Ringing can be seen around and within the UPC symbol  from this frame taken out of the original MJPEG recording. It is about as visible and even seems to be less so in the video itself, due to the “Film Grain” effect present in the game helping to hide it. Click to see Full Size

    The very small amount of color banding present in the original recording was somewhat generated by the Game Engine and there is very little of it (what does occur is hidden somewhat with the film grain effect the game has).
    In the recorded output, thankfully there is very little, partially because of a higher-quality setting when used and how MJPEG codec handles color dithering; color banding usually won’t be seen very much at higher bitrate/quality settings (which means low compression), but will be easily seen at lower bitrate/quality settings (which uses higher compression).
    Keeping above 80% quality when recording with the MJPEG codec [I recommend recording at 90% if your system can handle it, as most games do not have the Film Grain effect present in Absolution to help hide compression artifacts, such as color banding, flat color/area macroblocks and Gibbs Effects] if you have the space, it should leave you satisfied with easily-editable captures.

    ²**Quality Test Comparison – Four examples of various Quality Settings (90%, 70%, 50% and 30%) when using MSI Afterburner’s MJPEG Codec in Hitman: Absolution. The differences are most apparent in the middle section, the bricks that the police officer is standing on, and the people milling around to the left of the gazebo, both areas showing colour loss (Posterization) and detail loss (Quantization), more obvious in the 30% sample (bottom). All sources were original output frame extractions from 1080p recordings.
    Click to see Full size

    [A quick note here that MSI Afterburner’s output/recording seems to be somewhat darker than other game recording programs. It even states this in it’s own Options, “captured video may appear darker than you see it while gaming” and offers a checkbox that will apply Gamma Correction. Since this article is more about MSI’s MJPEG optimization and utilization (performance and ability to maintain visible quality), this ‘darker recording’ will be explored further in a future Game Recorder Comparison article]

    For people trying out any game recording software and finding your recordings are choppy/laggy on playback (that is, when you are looking at the generated/recorded file), you should find that if you use a player/viewer that has Acceleration (GPU, videocard, DirectX processing), it should play back much more smoothly. If your system does not have this option, you can also try converting what is captured to another file temporarily, one with a smaller bitrate/size, and you should then find it will play back that converted file just fine (especially when recording with lossless/high-bitrate codecs).



    It was interesting to do some side recording with Afterburner’s included RTV1 codec as well*
    The Riva Tuner Video codec is an iteration related to older codecs such as Indeo Video and S3TC compression techniques. It is similar to MJPEG and it seems to have very little effect on performance while recording – even performing slightly better than MJPEG at times, which was a nice surprise. Unfortunately, it suffers from ‘color banding’ (Color Quantization/Posterization) and the result is apparent lower quality, even at high bitrate/quality settings. Although it may not be as obvious in the below comparisons (depending on the settings of your monitor/colors/brightness), and while it certainly does not ‘destroy the quality overall’ in the game recording, in the captured video the color banding can be very distracting, especially when it includes motion through the color and light changes in an area as you move through it [it may not be to everyone, of course]. The size of the file produced is quite a bit larger than when recording with the MJPEG codec as well, but more on that in a future article..

    *As this article is mainly a Test of Afterburner’s usage of the MJPEG codec, a future Game Recorder Comparison article will include the RTV1 codec found in MSI’s Afterburner and cover it in more detail than here

    ¹**An example of the RTV1 codec’s problem with Color Quantization (‘color banding’). This frame is extracted directly from a 100% Quality RTV1 codec recording (Batman: Arkham City Benchmark @ 1080p). The areas that contain the most obvious color banding problem have been highlighted with green circles.

    If you are having problems with Color Banding that is not in the game itself, try to use a higher-bitrate setting (higher quality) for the codec you are recording with, resulting in lower compression and lowered loss of details, if you can do so.
    [With the RTV1 codec, it appears that it will still remain a little, no matter what…]


    Getting back to MJPEG testing with Afterburner, framerate was maintained close to non-recording performance (at ~30-60+fps for this game) when recording. I usually used MSI’s Afterburner only as a monitor/controller for the videocards installed and captured with another program such as FRAPS or Bandicam. Using MSI Afterburner alone and having to run one less application in the background to capture no doubt had at least some sort of streamlining affect on performance. It felt that way, slightly.

    Clear, crisp textures can be seen in this frame taken from the original MJPEG capture.
    MSI’s Afterburner and it’s utilization of the MJPEG codec seems to be even slightly superior to Bandicam’s implementation of it. [Hmm..something that must soon be tested!]
    Click to see Full Size

    The Average bitrate of the original MJPEG captures was about 30Mbps up to 70Mbps, which meant a writing stream to the disk of up to 8MB/s, which almost any hard drive can handle (recorded onto a drive capable of 150MB/s at the time).
    The original generated recording files were about twice the bitrate and size of the final MPEG-4 compressed file uploaded to YouTube, the final file weighing in at about 600MB with a bitstream of 25Mbps on average (it is assumed that almost everyone will compress recorded material into a final output video compilation file of 8-20Mbps or so, for uploading to YouTube/Vimeo/etc (Blu-Ray’s standard bitrate is 36Mbps and most video editing application presets go up to 20Mbps by default).
    This final utilized bitrate, with the efficiency of H.264/AVC, manages to keep most of the detail that was in the original MJPEG recordings, although sadly, most of the finer detail is lost after uploading, as can be seen in the screenshot comparison below:

    Originally used in an earlier article testing out MJPEG on Diablo3 with Bandicam, this screenshot shows examples of the detail loss after uploading to YouTube, when the video is played back at 1080p and 720p. Click to see Full Size 

    What was more disappointing was that YouTube feels the need to overly re-compress uploads. Much of the quality is lost, especially things like the film grain, one of the ‘first things to go’ in temporal video recompression. For instance, at 1:03-1:08 there is visible grain effect maintained in the settings I chose for the final compressed output file, keeping most of the grain from the original MJPEG recording from Afterburner. In the YouTube Video Player after uploading, it can be seen that much of that grain is lost. Another example of this is the dense cornfield against the much flatter sky textures at 1:30-1:36. I kept the complexity of the cornstalks and hard contrasts of the plant details versus the sky on purpose, yet after YouTube’s recompressing of the video, the result is blurred and smoothed details that were not like that in the recorded MJPEG video or the final H.264/AVC high-quality video output/final compress. I will attempt other uploads of the data at various settings for experimentation and put it just below this paragraph when an upload does not lose much of the finer details I wish to share**. I understand they must do it to save space (no doubt people upload huge, ‘FRAPS-original’ size files and recordings sometimes), it is merely unfortunate. At least it then becomes an example of what happens to some of the quality and detail once uploaded to YouTube (the extracted frame above, for example, is from the original MJPEG recording produced by Afterburner). There seems to be no use, at this time, to attempt to upload extremely high quality/fine detail. 

     The file originally uploaded to YouTube, the results of the MSI/MJPEG Quality Test, was previously compressed with a bitrate of 25Mbps. While this bitrate, using high-quality H.264/AVC codec settings, was enough to maintain details such as Film Grain and high contrast edges, much of this detail was lost after YouTube recompressed the uploaded file. 

    **Another, higher-bitrate excerpt [in an attempt to compensate for YouTube’s recompression] of the original MSI/MJPEG video capture:

    This video then, is an attempt to compensate for YouTube’s recompression and data loss, by uploading a video stream with a very high bitrate (an average of 60Mbps, up to 80Mbps, higher even than the original recorded data). As such, the duration is much smaller, a mere excerpt of the original intended upload.

    Result: Even when a video stream is uploaded with the much higher bitrate, even when the original captured file is uploaded, even when I rendered the capture to a 2160p (4K UltraHD) file and uploaded that to YouTube, YouTube’s recompression of the uploaded material (while still watchable) loses far too much detail from the actual upload – at least for high-detail evaluation of a game recorder’s produced video streams. This is unfortunate. For now then, I will try to always show frames (screenshots) extracted from the original captured files created by game recording applications in Quality Tests…

    Turning up the Recording Quality setting to 100%, the bitrate for MJPEG jumps up to over 275Mbps (over 30MB a second of file size being written to the drive). Quite a jump – and at that bitrate, the size becomes comparable to a YUV codec (or a FRAPS 1080p half-size recording) easily – but the quality ramps up as well. Color dithering and loss of detail is surprisingly near-negligible at 100% Quality with this game, yet the resource demand for using the MJPEG codec [especially MSI’s optimization of it] seems to remain small, as MJPEG was already a lightweight codec with somewhat smaller processing being done, to begin with. Today’s powerful videocards and CPU’s should be capable of pumping out a sequence of lightly compressed JPEG’s in a single file [no pun intended] without breaking a sweat. As long as your system isn’t chugging along already, adding some MJPEG capturing shouldn’t affect it very much. For those of you with slightly older systems with trouble recording in other codecs, give MJPEG a try, it should record smoother for you.

    Overall, well done MSI.  /clap

    If anyone is looking for a completely free Game Recording program (it might have even come on a disc with your videocard, as mine did) look no further than MSI’s Afterburner. Keeping the settings relatively high [especially with the MJPEG codec, to keep compression artifacts low] and/or doing your own tests to see what looks ‘good enough’ for you, I suspect many people will be happy (if you aren’t already) with using Afterburner and the low-resource-demanding and editing-friendly MJPEG codec to record your gaming adventures.

    Please note dear reader, that I am not saying “This codec is the best one to record with” or “use this one only”. I am merely showing that it is possible, or how to tweak it for quality or file size, as to your own personal tastes. There are many codecs out there to choose from when game recording and although some are more apt for certain types of games than others, overall it is your own choice to do with as you wish – do a few short tests and use what you prefer.

    Have fun recording with MSI Afterburner and the MJPEG codec – and See you in the games!




    [Note: As noted throughout this article, this testing of MJPEG with Hitman:Absolution alone is not a full test of MJPEG quality maintenance potential, as this game utilizes a “Film Grain” effect, which hides some of MJPEG’s weaknesses in maintaining Quality. In a future post (Part II), a more in-depth examination of MJPEG as a video game recording codec, using other games and utilities, will be actualized. See you then!]

    Quick Tip: The Sims 3 – Game Recording Is Slightly Darker Than The ‘Normal’ Colours Of Regular Gameplay [FIX]

    Just a Quick Tip for those of you recording The Sims 3 and finding that your videos are looking ‘darker’ than the original gameplay itself – a problem that has been around for some people for over a year now… It’s not that the game isn’t recordable (although for some people they got nothing but ‘blank/black screens’ a few years ago) it’s that the recordings are coming out, what looks like, a few shades darker than what the game really is.
    I was recently seeing a spike in the number of people talking about this problem again and decided to see if I could find a fix, or at least a workaround, for it; and what I found was something that everyone can do for now (at least until AMD/NVIDIA or Maxis/EA makes an update that fully fixes the issue) and that is simply: to run The Sims 3 in Windowed Mode.

    Whether you are using Dxtory, Bandicam, Afterburner or most other game recording programs (even NVIDIA’s Shadowplay has the same issue for some people), the fix [more of a workaround] that I found for now at least allows you to record your Sims 3 gameplay with proper colours, as you can see in these frames extracted from a couple of game recordings, below:

    Comparison between the display modes and the colours when recording (Darker vs. ‘Normal’) for the recording issue with The Sims 3, showing that the workaround works [at least for now] in two extracted frames from two game recordings (one in Windowed Mode and one in Fullscreen Mode). [In the right half, the camera has been ‘zoomed in’]

    Have fun recording your Sims 3 gameplay once again, if this problem has made you stop – and
    See You In The Games!

    Hitman: Absolution – First Impressions and Screenshots

    I finally picked up the latest iteration of the Hitman Series, Hitman: Absolution, starring Agent 47 as the main anti-hero, id est killing the bad guys but never quite [arguably] becoming one of them. Differing from the last couple of Hitman publications, Absolution has an overarching story, connections being made in a chronological manner throughout the various stages and settings. Characters are introduced and developed via cutscenes, as the plot is pushed further by your completing the next mission for a feeling of engagement in the storyline.

    I personally liked this approach, as opposed to the last couple of Hitman games, which seemed like mostly ‘replays’ of old missions from previous games (which in and of itself, isn’t a bad thing). While there were similar settings, such as a Chinese Market Square, they were sufficiently changed enough – especially with the graphical improvements and new gameplay interface – to seem varied enough to be enjoyable. There were even updated versions of [personal] ‘old favorites’ that I waited excitedly for (such as a ‘Hotel’ stage). Slightly more varied than the old versions, if you include the new “Instinct” game mechanic, these levels felt ‘fresh’, even if they weren’t new.

    The “Instinct” game mechanic seems like an effort to simplify the game, making it easier for newcomers and those who had trouble with the complexity and scope of the previous Hitman games. Indeed, I remember reading a lot over the years of people saying the Hitman games were “too big” or “too complex” and that it didn’t help the player much at all, as far as where to go and what to do. It “plopped you down in a large area with just a map”, they felt. Of course, that was the draw for all of the other people, the complexity and seeming openness of the game was enjoyed, where you had to figure out everything yourself. You could decide what to skip and what to do and could decide for yourself how to do it. The new “Instinct” mechanic of Absolution doesn’t take too much away from this (you can turn it ‘off’ if desired) and it actually adds to the cinematic feel of the game by taking the ‘player out of playing’, so to speak, which results in more of a feeling that you are ‘playing Agent 47’, guiding him (and using his innate abilities) through the game, as opposed to ‘actually being Agent 47’ and figuring everything out yourself heavy-handedly. I suspect this more objective approach has already been a point of contention since the game was released.

    An example of Hitman: Absolution’s new ‘Hitman Instinct’ game mechanic, showing how Agent47 can ‘sense’ enemies in and around the nearby area and estimates where they may be heading.

    When utilizing Agent 47’s ‘Instinct’, the game shows where 47 ‘senses’ there are enemies and where they are and shows you on the screen with outlined shapes. It even shows where 47 ‘calculates’ enemies will be moving to, showing you their intended path with a line of flame and where they will stand still with a larger lick of fire. This is where the adrenalin-dipped decision making and primal ‘danger’ awareness kicks in during the game, as a player can choose to set up an engagement with an enemy, or stealthily avoid these paths and points.

    For those who do not like or want the new game mechanic at all, it can be turned off, mainly by choosing a higher difficulty level. There are five to choose from and higher difficulties result in more ‘sensitive’ or ‘aware’ enemies, tougher enemies (wearing more body armor one assumes) and more of them. For those who are new to the game or having trouble with it, the difficulty can be lowered as well, with less enemies, enemies with less skill (not as good at aiming) and less awareness (having a bit more ‘tunnel-vision’) allowing you to sneak around them easier. The option to have this game mechanic off or on, at the players choice, is nice and was no doubt included to appease those who would not like it’s hints and guidance. New players (those talking about the games’ difficulty in the past) can have it on and still enjoy the action and storyline as well. It feels like an ‘attempt to please everybody’ – and I assume it will work well in that regard. (I haven’t read any Reviews of the game (to avoid exposure to the material within) before I purchased it, but I assume that once I indulge in others’ opinions, I will see much disagreement on that last sentence).

    View of a hotel cleaning supply room from an air ventilation shaft. Click to see Full Size

    The game itself felt atmospheric and cinematic. The music changed as action waxed and waned. Enemies ignored or chased you around winding levels that you had to discover and remember. The graphics were spectacular, with detailed textures, dark and gritty lighting and shading. The core Hitman gameplay was there – even if it wasn’t there for very long. This game felt very short to me. Perhaps it was the somewhat simple Television Movie Special plot, perhaps it was the number of missions (although they were split up into sections). Perhaps it was merely enjoying it so much that I wanted more, but just during the course of writing this article off and on, I have completed the game in it’s storyline entirety (not counting Challenges and Item Collection) in just over 20 hours. That doesn’t seem very long, but I suppose it is to be expected in a game that is more like “Max Payne” and less like “Skyrim” (more Action and less RPG). You could keep playing after finishing the main story, select past levels and retry them, doing them ‘cleaner’ for a better score or achievement, or look around and discover new weapons and pathways, or just redo any level you wanted to for fun.

    An example of how the levels are split up into sections and how you can select past levels to replay them.
    An example of the updated game engine, with higher-detailed character models, textures and environments.
    Click to see Full Size

    Other than the copy-pasted ‘general population’ mannequin-people utilized in larger crowds (used understandably to keep memory/resource usage of the game down of course – all of the ‘main’ NPCs have good detail to them), I personally liked the attention  paid to smaller details, such as the amount of debris scattered around the levels – things like cups, papers and garbage, all part of the gritty ‘lived-in-ness’ of the environment, adding to the realism. It’s nice to see games that pay more attention to the surroundings/settings these days, as opposed to the stark, clean-floor environments in games of yesteryear.

    Overall, Hitman: Absolution was very enjoyable. It was great fun to figure out steps and schemes for the various areas and carry them out with cold calculation. I laughed out loud a few times and grit my teeth in anger at the more difficult parts, playing them over and over again, trying to figure out new ways to accomplish the objectives and complete the contracts. Despite feeling shorter (perhaps just because it was so enjoyable) and despite some changes that others might not entirely like, I still suggest trying it (especially if you are a fan of the previous games in the Hitman series). I personally had a lot of fun with the game – and isn’t that the most important thing?

    Have fun with Absolution and See You In The Games!

    My trip to New Delhi & Hyderabad Cont……..

    I finished the 5th and final OCA for this assignment. The organization assessed is rather a small one but with a track record of substantial outputs. The 3rd organization Indian Institute of Dalit Studies, the 4th organization Yugantra (www.yugantra.org.in) and the 5th organization Institute of Social Studies Trust (www.isst-india.org) had fewer economists as researchers than the 1st and 2nd organizations assessed. This resulted in their research being more focused on the softer aspects of development such as gender, education and inclusion. This meant that they had more interactions with civil society organizations. In a country that is looking to grow at 8% on an annual basis it is good to have this perspective brought in to the policy making process.

    I finished the OCA by 4 PM and made my way to he airport to take the flight back to Colombo. To my surprise the flight was on time and we were able to board and are ready for take off on time. I dreamt of sleeping in the plane and getting home at a decent hour and taking a shower and going to sleep so that I can start a new day in Colombo without the effects of travel. This however was not to be. As the air stewardess counted the passengers there was one passenger missing. This meant that the airport staff had to look for this idiot all over the airport. As they could not find him then they decided to offload him; so this meant that they had to offload his baggage as well. As the Delhi airport did not have a bar coding system that meant that all the baggage had to be manually processed to identify the missing passengers’ baggage. This took one and a half hours.

    Apparently the passenger was a phantom as he has been checked in (as part of a group) transferring to this flight with his luggage but he was physically not there. I hope they throw the book at the counter staff that did this horrendous mistake. And fix the system to ensure that transfer baggage is not loaded on to the aircraft until the passenger physically checks in. I really thought that this type of kinks in the system would have been sorted out long time ago; apparently not.

    So what promised to be a nice ride back to Colombo turned out to be the longest flight between New Delhi and Colombo. The silver lining is of course that we arrived safely!

    Have to finish all my reports for the India assignment and apply for my Philippines visa next week as I have to leave for Bangladesh on the 24th of March.

    Spotted in a hoarders driverway

    the front yard was covered in a variety of junk.

    Just run across this while out walking about. I think behind it’s a Corvette, and in front of it was a 1990 is Firebird GTA 

    Personal Log: Might not be able to post for a bit longer still… [Editorial/Personal]


    Personal Log, Stardate 20160901 [I have no idea how that works heh]

    Just a quick Personal Note to say that I apologize to my dear readers for not posting anything for a while, and that I may not be able to post for a while longer yet… I have been experiencing a worsening of my ongoing symptoms… I may be okay in about week or so and finish up some Project irons I have in the fire; but I don’t know, it may take longer than that to get back up to the point where I can play and finish testing some recording programs I was working on, and post about it all…

    < Potentially Sad Talking About Sicknesses Follows, In Case Of Feels, Stop Reading, Play Game >
    I’ve never really mentioned what I have or what I go through before, since starting this Blog five years ago.. I didn’t really want to trouble people or put those thoughts/feelings on them, but I have had a few people ask me personally what it was – and I was looking something up recently about my condition (it’s a condition I (and Doctors as well) are constantly having to learn about) and I read quite a bit about other similar stories, where other suffers were in much worse condition than me… They were literally bed-ridden… And while I was also like that for the first couple of years, I have improved slowly over time to the point where I can sit up, and sometimes even play games, and on good days work on an article and do things around the house… 
    My condition is Myalgic Encephalomyelitis, which is an infection of the brain and spinal column, which gives components of Chronic Fatigue (getting tired easily with a slow recovery rate (as in days) if I go to the store, etc) and Fibromyalgia (inflammation and pain in all areas of the body, like when you get a ‘flu’ and are sore all over? it’s that, all the time…heck, many of your Aunts or Mothers may have Fibromyalgia, so you may have heard about it..). It is not a well-known disorder, despite millions of Americans having it.

    Every year I learn something new about it or studies that found out something new about it; but nothing is ever concrete on ‘how to get rid of it’, unfortunately. The only good part about that is, is that all Doctors have concluded that it is “something that goes away on it’s own, but noone knows when”… Some people have it for a year or so and some have it the remainder of their lives. I am in my 10th year now, but as I have said in the past, I try to always see the positive in things and I have been slowly improving overall, slowly over the years…

    I don’t want to make anyone feel sad, I am sorry if this information does… I merely wanted to inform my readers that I may not be able to post things I have been working on for a while longer… Some of the things I was working on are: GPU-Accelerated Game Recorder Comparisons (Playclaw, Bandicam, Mirillis Action, D3Dgear, and more), First Impressions of some games that I started work on already (The Elder Scrolls Legends Closed Beta, Dropzone Closed Beta, A Return To The Elder Scrolls Online (I was in the Beta for it) and others), bringing back the “Can You Guess Where The Screenshot Below Is From” (there have been no winners so far and I have some Giftable Games a-waiting on Steam and GamersGate) and even more projects that I don’t want to mention yet – to keep them a ‘surprise’, heh).

    I enjoy writing my articles and posts here, helping others with the information I have figured out, found or collected, doing testing, giving tips of games and even Video Editing and showing effects of settings in both, including also creating the Headers and graphics utilized here (they are all done by me)…
    I plan to continue doing this for a long time to come… I just realized there has not been much the past little while and wanted to let you all know there may not be some yet for just a little bit longer (‘recovering’ from a Cold or “doing too much” takes about a week or more each time I do something or get a cold, to get back to where I was, with this illness, everything takes far longer..).
    Thank you for your patience, my wonderful readers, and I hope that I can contribute helpful information again for you, in the near future.

    Sincerely,

    ~Troy from The Game Tips And More Blog

    LUXURY GIRLS BEDROOM DESIGN DECOR STYLE GOOD

    The design of a room can be a major problem in the redesign of your home. The problem could grow if you have to do for a child – a girl in particular. But do not worry, because we had some bedroom design ideas for the creative minds of the people working with the Italian girls.

    LUXURY GIRLS BEDROOM DESIGN DECOR

    LUXURY GIRLS BEDROOM DESIGN DECOR

    They work in an atmosphere of classic charm in a contemporary way through a range of unique colors. Most models adopt a classic style, with good curves and cushions, and a pile of wood painted to create the perfect atmosphere for your little princess.

    LUXURY GIRLS BEDROOM METAL DESIGN DECOR

    LUXURY GIRLS BEDROOM METAL DESIGN DECOR

    LUXURY GIRLS BEDROOM DESIGN IDEAS

    LUXURY GIRLS BEDROOM DESIGN IDEAS

    LUXURY GIRLS BEDROOM DESIGN CONCEPT

    LUXURY GIRLS BEDROOM DESIGN CONCEPT

    Workout Anytime in Global Atlanta

    Workout Anytime in Global Atlanta

    WORKOUT ANYTIME was recently featured in Global Atlanta. The article highlights Atlanta based fitness center chain, Workout Anytime adding its first location in Canada this fall. It mentions the new location in Calgary, Alberta scheduled for an October opening. Randy Trotter was quoted about the success Workout Anytime is planning to bring Canada. It also mentions Dustin Taylor and Jeff Gellatelly are the mast franchisees for the new location and grants them rights to open Workout Anyime centers in the provinces of Alberta and Saskatchewan.

    You can view the full article here. 

    July Currently

    How did it get to be July already?!?!

    I’m still recovering from 3 days of EdTech awesomeness at the ISTE conference and linking up with Farley at Oh’ Boy 4th Grade for this month’s currently.

    Listening – My two-year-old has recently become obsessed with Sofia the First on Disney Jr. It’s a cute show, but not my favorite of the toddler choices…not that I’ve become a connoisseur of toddler TV or anything…

    Loving – I started a garden last summer, but it became somewhat overgrown when Georgia had its monsoon season last summer, and it didn’t turn out as well as I’d hoped. This year, we’re in a new house, and while I don’t have the yard space (or HOA permission) for a full garden, I have space on my deck for a container garden. I’m growing bell peppers, jalapeno peppers, herbs, tomatoes, squash, cucumbers, and carrots, and they’re really coming along! My daughter and I check on them every afternoon, so it has become a fun summer project.

    Thinking – This was my first year to attend ISTE, and I learned SO much. It was overwhelming, exhausting, and inspiring, and I just need a little time to process it all. I’ll start blogging tomorrow about some of the coolest stuff I learned.

    Wanting – I’m moving into a new classroom this year, so I had to box up all of my stuff at the end of the school year. I’m hoping (*fingers crossed*) that it all got moved to the new room (in a different building on our campus) so I can begin unpacking soon.

    Needing – I’m a little panicked that it’s July already. I have a lot of projects that are in various stages of completion, and while I know better than to think I’ll get them all done, I’d like to check a few more items off my list before I go back to school in a few weeks.

    4th Plans – I’m looking forward to a three day weekend with my husband and daughter. We don’t have any big plans, but we may take Sydney to see her first fireworks extravaganza.

    On a final note, as I prepare to move into my new classroom, I’m starting to think about decorating. The wall colors are very different in my new room, so my old stuff might not work. Here’s a quick pic of the new room from my Instagram account:

    I’d love to hear your color schemes/decorating ideas if you have any! The move-in and shopping spree will start next week!

    Have a great weekend!

    HOUSE OF INCLUSION Koichi Kimura Architects

    House of Inclusion” as-is called the firm FORM / Koichi Kimura Architects, is a home to extraordinary volumes built a new residence in Shiga, Japan …
    “Every piece of this house has been designed so as to bathe in natural light to enhance the simple beauty from within” confides the Japanese architecture firm.We observe different windows and niches of light placed at strategic locations and atypical of this house of 151.71 m2.
    A small patio is flirting with the wall on the outside and the living / dining room of the house.

    HOUSE OF INCLUSION Koichi Kimura Architects
    MODEL HOUSE OF INCLUSION Koichi Kimura Architects
    EXTERIOR HOUSE OF INCLUSION Koichi Kimura Architects
    DESIGN HOUSE OF INCLUSION Koichi Kimura Architects
    INTERIOR HOUSE OF INCLUSION Koichi Kimura Architects

    Superb materials were used for interior decoration, we welcome in particular the sublime and the bedroom floors polished concrete … WE LOVE IT!
    The architects of the firm FORM / Koichi Kimura tell us more about this house. This house, Located in a new residential area, is for a 30-something couple. Surrounded By Other House, The Design Goal Was Set Up to block out the Outside world while Avoiding too much closure, as well as “to Provide Rich and sensuous spaces.
    First, a small patio and a path connected to it Were Laid Out Between The living / dining room and exterior. They Are Surrounded by a wall That blocks off the line of sight from outside. Planting and lays out are ugly At The patio, so thats the picturesque images of green and water are Viewed From The rooms.
    Enclosed by walls create indirect light That softly filling The Entire room, tea house presents scenes sentimental Here and There. The Living Space And The Life Lived There are enveloped by green and light, Creating an affectionate environment.

    Spending Your Money Wisely with Quality Food

    Wherever possible, it is best to grow your own food. This is a help with the family budget. But many excellent articles of food may not grow well in your particular locality. They must be brought from a distance and exchanged for cash. If you are on a limited budget, how can you spend your money for the greatest value in food? This is a very practical question.

    Foods which are manufactured and refined usually cost much more than those in the natural state. At the same time there is danger that some of the minerals and vitamins have been lost in the manufacturing process. In such a case you lose out in two ways, first, by paying much more for the product, and second, by the loss of essential elements from the food. This is not a wise way to spend a large portion of your money. Do not be carried away by all the glowing advertising material on the package or container.

    Take the question of breakfast cereals so widely advertised today, particularly those flakes that have been coated with sugar. Such breakfast food is scarcely worthy of a place on your table and in your family budget. Dry cereals in any form offer less nourishment than do the raw materials from which they are made. Much of real value is lost in the manufacturing process. And when a sugar frosting is added, the effect on young children is far from good. That sugar coating is the worst feature of all. This excess sugar increases the possibility of dental decay and often results in chronic indigestion as well.

    Diet Start

    Cereals and similar products that are cooked at home are much less expensive than those that are already prepared. The same is true of breads baked at home. They, too, are more nutritious. It does take time to prepare such food. But in the end this saves money, and the whole family will be healthier and more satisfied.

    People in well-to-do households may not have much trouble in selecting an adequate diet, provided they take the time to do so. Unfortunately, most of them do not bother. They just eat what comes their way or what is advertised over radio or television. This haphazard way of living is likely to result in serious deficiencies.

    The family with limited means must be even more alert to the problem of selecting a diet that is suitable, but not too expensive. They must not allow themselves to be swept away by the flood of advertising so prevalent today. They must buy wisely and well.

    Those who live in the country may find the situation a little easier. A small garden, with a few hens and a cow, may enable such a family to live far better than one whose means are not limited. Everything depends on the choice that is made.

    Actually you can feed your family better than you think you can. But it does take a little planning. However, people who live on a well-balanced diet are naturally happier and healthier. Such a diet need not be an expensive one. In fact, there are many experiments in rats and other animals showing that a less liberal diet tends to promote a longer life. Many modern nutritionists believe that we live on only about half of what we eat. The rest only compels our hearts and other organs to work that much harder to get rid of the extra food.

    Experiments at Cornell University seem to bear this out. A certain number of white rats were used. Some were allowed to eat all they wanted whenever they felt like it. Others were placed on special diets when they were in a rat’s “middle age.” Those rats which ate as they pleased lived 600 days or less. Those on the diet in middle age lived over 1,000 days. The oldest rat lived 1,400 days, and he never had a square meal in his life! It is not the quantity of the food, but the quality, that counts.

    Planning Better Meals

    Some people become confused over such scientific terms as calories, vitamins, minerals, and so forth. This is quite understandable. But don’t let this scare you too much. Today you can balance your diet fairly well without knowing very much about these various terms. Without going into too much detail, you can reach a good middle-of-the-road plan that is almost foolproof.

    During recent years nutritionists have worked out what is known as the “basic seven” food groups. If these foods are included in the diet each day, they will meet the needs of the whole family very well. One does not have to bother with all the endless details of a complicated diet. Just follow this basic plan.

    These seven food groups are easily recognized. They should become the foundation of each day’s meals. Some foods from each should be in one meal, others in another. But these essential things should always find a place at some time in the day. Other things may be added as desired. But it is best not to get too far away from this simple daily program. If any of these basic groups are missing in your daily planning, your diet is likely to be deficient in some things that are vitally important to good health.

    Quick Tip: Can’t Record Your Game At All? (64-bit/32-bit Fix)

    Just a quick tip for when it seems like you cannot record your game ‘at all’:
    64-bit computing is still relatively new for home users, which means that not all 64-bit hardware and applications communicate without problems. Many game recording apps simply can’t record games that operate in 64-bit modes. Just look for a 32-bit version of your game/gameclient and then your game recording program (no matter which one you use, be it Dxtory, Bandicam, MSI Afterburner..) should be able to record the screen. [For games that use Java (eg. Minecraft), download the 32-bit Java at their website]

    See you in the games!

    SWIMMING POOL DESIGN IDEAS GERRR……

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    Here are some tips on how to keep your energy bill is lower and save valuable resources of the Earth at the same time.

    * Heating your swimming pool: Depending on where you live and heat that is during the spring months and summer, you may not need to heat your pool as often as you think. The houses are in hot desert climates and do not need to heat the pool at night or when he decided to entertain. By heating the water, taking into account alternative methods of heating used to heat water. Energy from solar panels on your home is an excellent way to harness the sun’s energy to heat your pool.

    * Cleaning the Pool: Many use automated equipment, which operate in the pool when the pool is empty. While helping to keep the pool clean when you’re in, but also the use of electricity 24 hours a day. Try to reduce the frequency to an automatic cleaning to be used. Also choose to use less chlorine, and to consider alternatives such as cleaners, detergents, ozone. Keep the cover over the pool when not in use also helps keep the debris in the air cleaner, leaves and twigs.

    * Keep all plastic and vinyl toys away from the game: Even if I do not believe that the maintenance of the environment around the pool with pool toys the child is also important. Many pool toys are made of vinyl or PVC, also known as polyvinyl chloride. These types of toys, release toxins and chemicals hazardous off-gas. Try to select the pool toys that are made from natural organic materials and the safety of your children, and help keep the pool a greener place to play in.

    * Use other sources of water in your pool: In your geographic area, using other methods to collect water in your home into account. Options could include rainwater that can be used to fill your pool, and the plumbing in your home for showers, baths, basin and toilet. This measure can help you reduce your water bill and conserve water on Earth. For many municipalities, geographic, you can earn additional benefits by LEED, or the benefits of saving tax on income tax time. Greywater reuse for your home is a viable option for many homeowners.

    Owning a pool should be an enjoyable experience, after all, you deserve to relax and entertain in the warmer months of the year. Despite owning a pool should not be at the expense of its portfolio, the precious resources of the Earth or the health of your family. Follow these tips to green the pool and enjoy all the benefits of reading and resting in the sun.

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    SWIMMING POOL DESIGN

    EXOTIC CONCEPT HOME FULL COLOR VERY JUOOOOZZZZZZ

    Have you ever seen life, both in the apartment before? Usually, when it comes to so many colors, we have to overcome the enormous risk of visual confusion room. However, in this situation, it seems that everything is in place and atmosphere that inspired this apartment is the energy and extreme informality. Especially designed for young working couples, this house is a fusion of passions and interests. As their styles are very different and they wanted some of their own furniture to integrate into their new home, things were very difficult for designers.

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC LIVING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC DINING ROOM CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC KITCHEN CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BATHROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    EXOTIC BEDROOM CONCEPT HOME FULL COLOR

    Mt Trip to Manila, Philippines cont……..

    I returned to Colombo on the 19th morning without any delays. On the way I met one of my colleagues at Bangkok airport and that helped pass the time as well as chat on the plane.

    I found an interesting article on the web regarding “don’t know that you don’t know” I found the article to be spot on and very helpful in understanding this phenomenon. http://www.doceo.co.uk/tools/knowing.htm Now I can start to develop some strategy to work around this problem so that I am better prepared to face such an issue the next time around.

    I finished documenting the results of the workshop in Manila and sent the results for comments from the client. I am still waiting for the results. Hope I am able to finish this assignment this week as it has the potential to get delayed and get ugly.

    In terms of my future travel plans there are no assignments where I need to travel overseas at present. The assignments I have lined up are in Colombo. However things can change very quickly.

    Popcorn Cart, Warren, Ohio, circa early 1910s

    https://www.facebook.com/neatoldphotos.m.lucas2/photos/a.400823796751664.1073741829.400758923424818/908779272622778/?type=3

    Reverse Lunge with Diagonal Lift

    Lunges are a fantastic functional lower body exercise, and the benefits can be enhanced by adding an upper body component to the basic lunge movement pattern. One of the most productive total body lunge variations is the reverse lunge with a diagonal lift.
    The exercise improves hip mobility in the front of the rear leg, while also increasing strength and stability in the front leg and increasing core strength and mobility. Specifically, it improves hip flexor mobility while training the body to move smoothly in the spiral line. It also encourages proper tri-planar movement.
    Start standing with feet shoulder width apart in upright posture. Hold a medicine ball, dumbbell, or kettlebell (or even a body bar) positioned at the right hip pocket region. Step back with the right leg to perform a reverse lunge. At the same time move both arms diagonally up and back over the left shoulder until a comfortable stretch is felt in the anterior (front) of the right hip. Do NOT allow the back to arch. Pause in this position for one or two seconds.
    Do 10 – 15 repetitions on one side then repeat on the other side. It is important that you keep both feet facing forward and keep your trunk upright throughout the movement.
    Regressions:
    Perform the movement without a medicine ball, dumbbell, or bar
    Start in the split stance lunge position instead of having to step back
    Progressions:
    Increase weight you are holding.
    Perform the movement in an alternating side manner vs one side at a time.
    Video Links: https://www.youtube.com/watch?v=JDyGhcm-aVs

    My Trip to New Delhi & Hyderabad Cont………

    My 4th OCA was done for an organization in Hyderabad and I experienced something I came across the last time I did an OCA in Hyderabad. Readers of my Blog may recall my last visit to Hyderabad and the post of 10/12/09. Talk about déjà vu it was very similar on this occasion as well, but the difference was that it was led by the senior members of the board, who were eminent individuals in their own right. (I am talking about an attempt by the organization to cover up facts that directly deals with their capacity during the OCA). What made it very unpalatable was that they gave a presentation on the history and activities of the organization and conveniently omitted these facts from the presentation. This to me is a bad sign and a major put off. The irony is that even with these capacity issues the organization is a relatively capable organization and can be developed to do better; and the purpose for the assessment is exactly to identify these gaps so that they may be able to qualify for a grant to develop their organizational capacity.

    Other than this the rest of the assignment went as usual and finished the OCA by 4 PM on the 3rd of March. I went directly to the airport to take a flight to New Delhi for the 5th and last OCA. While waiting to board my flight I noticed a very weird thing. The displays at the Hyderabad airport that give flight departure details were giving a lot more information than it is logically required for passengers waiting to board flights. Let me explain; it starts with the information tag against the flights numbers as “Gate Open” and then as time goes by it proceeds to change the tags to “Final Call”, “Gate Closed”, “Boarding” and finally to “Departed”. In my experience this is the extent of the information which can be relevant to any passenger in the terminal and it stays for at least 10 to 15 minutes on the information board and then it is deleted from the board. However in Hyderabad Airport this is followed by another information tag saying “Airborne”; now who needs to know this? Does it mean that if you are late for the flight and that if the flight is not airborne they will put you on it? Don’t think so; as they say “gate closes 15 minutes before departure time”. Further given today’s security climate well-wishers are not allowed in the terminal. So go figure this one out.

    Quick Tip: Team Fortress 2 – What To Do With Those Naughty and Nice Winter Crates (Winter 2013)

    By now, most of you have seen these Random Drops, Crates that are either “Nice” or “Naughty” – but, “How do you open them..”, you may have asked? Well, this post is just a quick note to answer this question I have already started seeing on game forums and Question/Answer websites. Answer: You Can’t Open Them (Yet)…

    Soon hopefully, keys should be available for purchase at the Mann Company Store (Steam/Valve/TF2), most likely for $2.49 USD, if keys and dropped crates combinations of the past are anything to go by [I assume they are dropping them now, to allow people to collect some before the keys go on sale – to sell more keys]. So, if you get these [I have already started getting them when playing, hence the screencaps], just wait a little bit longer, until the keys themselves go on sale. Then, if you want to open them, just purchase keys and unlock them! Soon™… (Remember, you will need one key for each crate)

    See You In The Games!

    How to Get Rid of Cellulite

    Although the vast majority of woman have some cellulite somewhere on their body – nobody likes it!   So what the heck is cellulite anyway?  Cellulite is pockets of fat that have squeezed between bands of tissue, called septae, that are located below your skin.

    Women of all races get it, while virtually no men do. That’s because the septae of men are different from women. Men have stronger bands that are cross-hatched allowing them to keep fat in place more effectively. Women have weaker, vertically oriented septae that allows fat to squeeze through easier.

    Both thin and heavy women have cellulite. However the higher your level of body fat the more noticeable the dimpling will tend to be.  Unfortunately dieting does necessarily help eliminate cellulite. Losing weight helps sometime, but in some cases weight loss makes cellulite worse.   This occurs when skin becomes saggy after significant weight loss.

    There is a definite genetic component to cellulite which does run in families.
    Hormones also are part of the equation with cellulite, but science has not figured out exactly how hormones contribute to cellulite.  What is known is that cellulite starts at puberty which is a time that many hormone levels change significantly in females.

    Getting Rid of Cellulite

    Getting rid of cellulite is easier said than done.  Even treatments like Liposuction are not necessarily effective.    In fact Liposuction often makes cellulite worse by leaving your skin even more puckered looking than it was before.

    Dermatologists are quick to point out that there is no magic cure for cellulite, but there are ways to make it look better!   Two of the keys are working out and dropping excess weight sensibly (1lbs per week! – faster weight loss can exacerbate the problem!)

    Resistance training is key.   As you increase your muscle size and decrease body fat your skin looks smoother.     If you lose fat while you simultaneously build muscle your cellulite will improve.
    It is also important to work on the health of your skin as you age to make it more elastic so that as you lose fat the skin pulls tight rather than sagging.    

    Certain topical treatments that increase collagen in the skin, like Retin-A or creams with retinol or vitamin C, cannot hurt and may help.   

    Maintaining adequate water intake is also key for skin health and elasticity – 6 – 8 glasses of water per day is key.

    If you have faithfully tried everything and your cellulite is driving you crazy and you are prepared to spend some serious dollars – Cellulaze – is an FDA approved therapy.  Cellulaze involves inserting a lazer under the skin and projects heats in three directions and literally liquefies fat as it cuts the septae around fat cells which can reduce the puckering while also encouraging collagen regrowth.

    Cellulaze claims a 70 – 80% improvement in cellulite that lasts a full year.  It is most effective for active women with mild to moderate cellulite who are not significantly overweight and who also have good muscle tone.

    Unfortunately, Cellulaze is not cheap – costing $5,000 – $7,000 depending on the size of the area being treated.

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    Architects honey study apartment has a makeover that is quite original. The project is called “Santpere47” and has many interesting features. gold lines and circles to create a wall decoration that invites a lot of fun to watch.

    HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

    HOME DESIGN STYLE WITH STRONG VISUAL EFFECTS

    The ceiling is particularly exciting that the pattern is unusual and reminds one of the chambers of the royalties. Storage space is provided unconventional: not a library under the stairs and walls in some places where objects can be placed. The lighting in this apartment is also interesting to compare a second: the hanging lamps are subtle and elegant, and were impressed by the fire escape. The decorative elements are in perfect harmony with the general atmosphere of the house.

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    HOME DESIGN WITH STRONG VISUAL EFFECTS

    HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME LIVING ROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

    HOME KITCHEN DESIGN WITH STRONG VISUAL EFFECTS

    HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

    HOME BEDROOM DESIGN WITH STRONG VISUAL EFFECTS

    And More: Deals and Sales – End Of The Month Specials (February)

    The transition from February to March this year isn’t seeing a ‘ton’ of games on special sales, but there are a few deals on almost every gaming/dealer website (some are only on for the weekend and some last until the middle of March, see each sale you are interested in for details):

    Steam, Valve’s storefront has a Spotlight Sale of Sniper Elite: Nazi Zombie Army (1 & 2), which can be purchased together in bundles or 4-Packs to play with your friends and is their Weekend Deal:

    Sniper Elite Nazi Zombie Army Sale Page
    Sniper Elite Nazi Zombie Army 2 Sale Page

    also on sale
    Trine is on sale for only One Dollar (90% off), or get Trine 1&2 for $3.74
    Warhammer 40K: Dawn of War II: Retribution is on sale for $7.59 (75% off)
    Alternativa is on sale for only $1.29 (90% off)
    The Sims 3 is on sale for $7.99 for those who haven’t played it yet (60% off)
    Kung-Fu Strike: The Warriors Rise is on sale for only $1.99 (80% off)
    Moto GP 13 is $12.00 (70% off)

    Gamefly, the storefront that you can also subscribe to (that took over Direct2Drive in 2011) has a few sales going on, one featuring all 2K Games titles at 75% off:

    (click image to see Full Size)

    also on sale
    Bioshock is $4.99 (75% off)
    Bioshock 2 is $4.99 (75% off)
    Bioshock Infinite is $9.99 (67% off)
    Borderlands, Game Of The Year Edition is $7.49 (75% off)
    Borderlands 2, Game Of The Year Edition is $19.99 (50% off)
    Duke Nukem Forever is $4.99 (75% off)
    Civilization V is $7.49 (75% off)

    GamersGate, the storefront formerly part of Sweden’s Paradox Interactive has a bunch of sales going on as well:

    (click image to see Full Size)

    also on sale
    Call of Juarez: Gunslinger is $9.72 (46% off)
    with Battlefield 4 is out, Battlefield 3 is on sale for $4.99
    Sniper Elite V2 is on sale for $7.50 (75% off) or get the
    Sniper Elite V2 Collection (which includes: Sniper Elite V2, the Sniper Elite V2 Kill Hitler Pack, the Sniper Elite V2 The Neudorf Outpost Pack, the Sniper Elite V2 Original Game Soundtrack, and the Sniper Elite V2 The Landwehr Canal Pack DLC) all for $13.75 (75% off)
    The Tropico Trilogy Bundle (which includes: Tropico, Tropico Paradise Island, Tropico 2 Pirate Cove, Tropico 3, Tropico 3 Absolute Power) all for just $4.99 (75% off)
    and last but certainly not least
    The Total War Master Collection bundle (which includes: Empire: Total War, The Medieval 2 Total War Collection (M2TW and the M2TW Kingdoms Expansion Pack), Napoleon: Total War™ Imperial Edition
    Rome: Total War Gold Edition, Total War Battles: Shogun, Total War SHOGUN 2, the Total War Shogun 2 E-Guide, Total War Shogun 2 Fall of the Samurai, and Viking: Battle for Asgard) all for $25.00 (80% off, regular price $124.99!)

    Once again, some of these are only on for the Weekend and some last until the middle of March, so check out the sale you are interested in for details. I hope you catch something you want – and See You In The Games!

    WORKOUT ANYTIME on Cincinnati.com

    WORKOUT ANYTIME on Cincinnati.com

    The article was written by Cincinnati Enquirer Business Reporter Bowdeya Tweh and was based on interviews coordinated with Tony Petrocelli and WORKOUT ANYTIME Vice President of Development Randy Trotter. The article begins with details about the opening of the WORKOUT ANYTIME in Montford Heights. The article gives information about the gym and about the company, as well as information on development plans in Ohio.        
    Workout Anytime

    You can view the full article here, and view contact information about WORKOUT ANYTIME’S new gym in Montford Heights here.

    “Can You Guess Where The Screenshot Below Is From?”, The Game Tips And More Blog’s Game Screenshot Identification Contest, Re-Happens Again Today! [Updated 2018-03-02 with Answer Image]

    It’s the 15th of the month – and it is time for something that I re-re-started up, just last Month – The Next Installment of The Game Tips And More Blog’s ‘New-ish-sorta-but-not-really’ Contest:

    “Can You Guess Where The Screenshot Below Is From?”

    (A Game Screenshot Identification Contest)

    Having its’ Fifth Edition now, today – February 15th, 2018!

    All you have to do to win this contest, is contact me in any way you can (eg. Comment on this article
    below, Twitter profile tweet, email me or Comment/PrivateMessage TheBlog’s Steam Account by the end of the month, with these two items within your message:

    1. Your guess for the game the image is from.
    2. Information on how to contact you back (to receive Steam game gifts, etc) if you win.
    That’s it!
    **[Just a quick note to be careful not to include any information you do not wish to share ‘publicly’ when posting in the Comments area below or at Steam or sending a Twitter profile Tweet, as these messages are seen by ‘everyone’]


    The first correct answer submitted by a Skillful Identifier/Gamer will receive this month’s contest prize – which is: a gifted game from the Steam online store!

    [Note: Although I have been collecting Games on Steam over the past few Years, during Steam Sales,
    due to how Steam has changed Gifting games through Steam recently, you will have to temporarily become a Friend
    of TheBlog’s Steam Account (to receive the game – after receiving your Gifted Game, you may Unfriend of course)]
    Winners will also be announced in bold, large lettered-text, here on this posting and will thereby be immortalized on The Intertubes in perpetuity, proving to all other comers that you were “The Ultimate Game Screenshot Guesser Thingy Person” [aka. Gamer]!

    Previous Editions of this Contest [to ‘see how it works’] can be found at TheBlog, here:

    Can You Guess Where The Screenshot Below Is From – Contest #1
    Can You Guess Where The Screenshot Below Is From – Contest #2
    Can You Guess Where The Screenshot Below Is From – Contest #3
    Can You Guess Where The Screenshot Below Is From – Contest #4

    Are you ready? Here then, is the Screenshot image for this month, below:

    [As you can see, the image is a portion of a full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    After a week has gone by, if there is no correct guess as to what game the Screenshot is from, I will return here and put up a ‘Hint’ image – a larger portion of the Screenshot – to assist in Game Recognition-ing-ism…

    Update!

    A week has gone by and there have been no correct guesses received yet… So, here is a HINT image; (an enlarged area portion of the already-slightly-larger-than-normal CONTEST Screenshot for this month’s Contest)! Ready?

    Here is the HINT image (with enlarged portion revealed), below:

    [Click the Image to see it at a slightly-larger Full Size – and as you can see, the image is still a portion of the full screen capture; but don’t worry – the image used for the contest will never be ‘too’ obscure or small (for example, it will never be ‘just the end of a wooden log’ or anything like that)]

    At the end of the Month, if noone has guessed correctly by then, I will return here and reveal the full Mystery Screenshot and the Game it was from – Good Luck, Gamers!

    Update!
    It has been two weeks since the Contest began and there have been no correct submissions! Aww….

    To end The Mystery, here is the answer for February’s edition of
    ‘Can You Guess Where The Screenshot Below Is From’ (2018-02):


    The Answer for this month’s Contest was: Just Cause 2!
    [Captured in 2014, this Screenshot I took was back when I was playing games at 1600×900 – which is a ‘sweet spot’ I personally recommend [by my own testing] for Mid-Range GPUs (VideoCards). This was JC2 being played with a GTS 250, the ‘Black Knight Edition’ from ASUS which I paired at the time with an AMD X2 245, iirc**. Wow, I have been planning this identification game a long time – never getting around to it for a while of course – haha]
    Click to see Full Size
    Come back next 15th-of-the-month friends, when you can have another chance to be a Digital Screenshot Sleuth in the Sixth Edition of ‘Can You Guess Where The Screenshot Below Is From’ – and a chance to win the Prize that will be carried over to next time: a gifted game from the Steam online store!

    See You In The Games!

    [**Note: I am not affiliated in any way or degree with NVIDIA or AMD, and I have not and will not receive any compensation of any kind, for mentioning them here. I am merely an enthusiastic user of both companies’ products. I have utilized both and will continue to use both in the future ((on a personal note, I find I usually am ‘stairstepping’ with their GPUs, purchasing from one manufacturer, then the next ‘upgrade’ purchasing from the other, heh. I always Suggest to people who ask; to get whichever has Features you like – and only what you can afford at the time – it will be outdated in 3 years or so anyway; Enjoy what you have and be thankful because there are always people who have less!))]

    (The Game Tips And More Blog Contest Game #2018-02)

    Currently June (?!)

    Oh, how I love to start the month with Farley’s Currently over at Oh’ Boy Fourth Gradeespecially when I actually remember that it’s the start of the month and don’t have that revelation about a week in. 🙂

    Here we go…

    Listening:  I got to see Sara Bareilles perform at a small Atlanta venue on my birthday a couple of weeks ago, and wow – can she ever sing! She’s been in heavy rotation on my playlist ever since.

    Loving: The first couple of weeks of summer vacation are always the best because it feels like there’s so much free time ahead. A quick glance at my calendar would remind me that this summer is going to fly by very quickly, but for now, I’m thrilled to have a little breathing room before the hustle and bustle of another school year kicks in.

    Thinking: Math is on my mind a lot right now. I’m finishing up my final project for my math endorsement (an algebra unit), and I’m joining multiple book studies about math-related books this summer. My students did very well overall on the year-end standardized tests, but I feel like I’m still scrambling to make sense of the best way to teach the Common Core. I need to figure out something that will allow me to differentiate more without creating oodles of additional work on my end. If anyone has the magic solution, please let me know.

    Wanting: We bought a new desktop computer last year, and it was intended to be mostly for my school/blogging/TpT use. That worked for a little while, but my husband has slowly taken it over and claimed it as his. He’s been working crazy hours (he’s an attorney), and his work is often more deadline-oriented than mine, so I’ve given in. But now that I’m getting ready to start my doctorate, it might be time for us to give up on the idea of sharing a computer. I have a work laptop that I use sometimes, but it’s got some crazy restrictions/configurations that limit the programs I can install, etc. For most people, it’s not a big deal, but when you’re a tech-geek like me, it’s frustrating. So last week, I made a big pitch for me to get a new iMac desktop, and he agreed! There were some intense negotiations that went into the process, but in the end, we made a deal that we can both live with. I’m going to be responsible for generating the extra income to make the payments on it (we got it financed over 18 months), but between some tutoring jobs I’m taking and TeachersPayTeachers, I think I’ll be able to swing it.

    Now I just need to hold on for Monday when my precious new toy will arrive!

    Needing: I need to get organized and prioritize what I need to accomplish this summer because there’s no world in which I’ll have time to tackle my ever-growing to-do list. I need to create some realistic goals with deadlines to keep myself reasonably on-task. I also need to cut out distractions like randomly checking Facebook or email or Twitter every 10 minutes.

    3 Vacay Essentials – 1) Shade – I have the misfortune of being allergic to almost every type of sunscreen that exists — including the ones that say they’re hypoallergenic and made for sensitive skin. Put some of that sauce on me and stick me in the sun, and my body breaks out in a terrible, lobster-like swollen rash that is WAY worse than any sunburn I’ve ever had. So I stick to the shade as much as I can, and I visit my dermatologist every year to make sure that I’m not getting skin cancer. Not fun, I tell you.

    2) Books – This used to be a huge ordeal before the advent of the Kindle. I like having lots of summer reading options, ya know?

    3) Beverages – Hydration is important! And there’s a whole slew of summer drinks that I could put on the list… But seriously, I’ve been drinking at least 64 oz of water each day of this vacation before I even touch anything else, so I think I’m doing well.

    Big thanks to Farley for continuing to host this linky. Every month I find so many amazing blogs and learn lots about my fellow bloggers. If you aren’t participating already, you should definitely link up!

    ,
    Have a great June, everyone!

    Quick Tip: NVIDIA ‘In Game Overlay’ Stopped Working? Here’s How To At Least Get It Going Again [Fix / Workaround, Updated 2018-03-26]

    Whether it wants to be called Shadowplay, Share or [as of the time of this post] In-Game Overlay; it doesn’t really matter to most people I think – we just look for something to record our gameplay once in a while, maybe take some Screenshots, ‘and just work’. Thankfully, NVIDIA’s In-Game Overlay [or whatever it may be called by the time I finish this post, heh] does just that. Most of the time.

    Although I rotate between a handful of different recording programs off and on (such as Bandicam, Action, Playclaw and others – just for fun and also slowly working on another ‘Game Recording Comparison’ for the future), In-Game Overlay [built into the NVIDIA Drivers, aka “for free”] records when I want, it records a Buffered Loop (a timed, re-recording of ‘the last xyz seconds’, to save when needed) – and it even takes Screenshots and more. However, sometimes this big fella has just ‘stopped working’ lately. No saving Screenshots, no Recording, no Error Message, Nothing; and I wasn’t sure why… After only a tiny bit of Troubleshooting, I quickly figured out how to at least ‘get it going again’ and I just wanted to share that here for you all, in a Quick Tip™.

    To be honest [I always believe in being completely honest], I am still not sure why NVIDIA’s In-Game Overlay stopped working – but I did figure out how to simply get it working again – and here’s what I did:

    • Once I noticed the Overlay wasn’t taking Screenshots, I looked to see if the Overlay itself or more of the (many) NVIDIA utilities were still running, in the Task Manager. They were. [The In Game Overlay’s Executable is still called “NVIDIA Share.exe”, btw]
    • Thinking that something might have gone wrong with the Overlay utility, I opened up NVIDIA’s GeForce Experience.
    • In GFX [my accro.], I clicked on the ‘gear’ in the upper-right corner, “Settings”.
    • In the Settings area, I clicked on the switch/toggle for In-Game Overlay.
    • Although it took longer than normal, it eventually turned Off. Clicking it again, it turned back On.

    That’s it! After those steps, the In-Game Overlay was working once again. Taking a Screenshot, for example, the notification from the Overlay came up, and the Screen was saved. It also started Recording again, without issue. Here is a ‘Tutorial Image’ of the steps to take:

    Tutorial Image of what steps to take to ‘restart’ the NVIDIA In Game Overlay;
    the recording utility built into the NVIDIA Drivers
    (Click to see Full Size)

    Although I do not have any details on why it failed, I still thought this short ‘tip’ would be helpful for people that might run into this (“shadowplay not recording” or “in-game overlay not taking screenshots”, etc) – so I wanted to share it here. HTH!

    Update, 2018-03-26: Just a quick Update, that as of March 2018, I have run into somewhat of an extension of this issue, where GFX is no longer responding to this simple ‘toggle’ of the In-Game Overlay… Doing so (which used to temporarily ‘fix’ the issue above), now merely results in an ‘error’ message box, stating “That Didn’t Work. Try Restarting Your System.”, which although polite, is not very informative as to what caused the error or what else can be attempted to isolate/troubleshoot the issue further:

    Doing some more research online, I see many others running into this issue, as well as its’ ‘extension’ here… However, there still is no absolute ‘fix’ for this problem yet [at least, none that is verifiable and repeatable, which I prefer to have as a qualification to my sharing it here as a “fix”] – therefore, I cannot say for certain what can be done to fix it, even though a wide range of things have somewhat worked for others (some early steps work, others must use further steps), such as:

    • Uninstalling/Reinstalling GeForce Experience
    • Installing an older version of GeForce Experience
    • Utilizing a third-party ‘drivers uninstaller’ to completely remove NVIDIA’s GPU Drivers and Reinstall NVIDIA’s GPU Drivers/GeForce Experience [AMD users can get a similar utility directly from AMD]
    • Reinstallation/Formatting of entire system (eg. Windows) and Reinstalling NVIDIA GPU Drivers and Reinstalling GeForce Experience

    Once I find out what actually is a solid fix for this issue, I will state so here and post it in big, bold lettering [lol], along with a Tutorial Image (text on an example image of the solution, etc). Until then…

    1948 Packard woody station wagon and matching teardrop trailer

    https://silodrome.com/packard-eight-station-sedan-teardrop-camper/

    Free Weekend – Overwatch and Fallout 4 [Notification]

    Just a quick notification for those that didn’t know, that this weekend is a Free Weekend for two great games: Overwatch by Blizzard Entertainment and Fallout 4 by Bethesda Softworks.
    To commemorate this amazing alignment of the planets that these two behemoths occupy, I created this ‘Mash-Up’ Image Header as a Reminder, which I will release as a Full-Sized Wallpaper, for fans of these two franchises, once it is complete… Soon™

    A big fan of both companies’ products, I was so excited about it – but I haven’t had a chance to play yet! So, I’m trying to help out all of you fellow gamers and notify you that these games are Free and Playable all weekend – including being sold at lowered prices – but it’s almost over! Get out there and jump in – and have fun! GOGOGO

    See You In The Game!

    Workout Anytime Daily 10 Prehab Routine

    Everyone knows that prevention is better than dealing with an injury, and part of injury prevention is spending time working on what are commonly referred to as “corrective exercises” or “Prehab”.   10 minutes a day spent doing 10 basic exercises can prevent many injuries, improve results from exercise, and dramatically improve movement.
    Ideally do these exercises barefoot or in socks – your feet will be working very hard during these exercises and shoes reduce ground feel.  If possible do them in front of a mirror to see your form!
    Hip Hinge – Hip Hinging is one of basic primal movement patterns, and it is also the movement pattern most frequently done incorrectly.   The best way to groove this movement pattern is practice it using a wooden handle or PVC Pipe held vertically against your back touching the back of your head, the top of your shoulders, and your tail bone.  By keeping contact with all three points as you hinge it teaches you to maintain a flat back which is essential for preventing low back injuries and developing proper movement mechanics that allow you to effectively load and unload the glutes and hamstrings.
    It is also a phenomenal dynamic warm-up for the hamstrings!   Here is a video showing how to do it:  https://www.youtube.com/watch?v=PG67O49Hsso    Do 50 reps per day and you will see and feel positive changes in your posture, movement, strength and mobility!
    Downhill Skier Exercise– This exercise contains elements of the squat and hip hinge.  Start by placing the hands palm down on the top of the thighs.  Keep the back straight slide the hands down until the palms are resting on the knees with the hips back like you are a second basemen.   You should begin to feel a stretch in the hamstrings.     Continue to hinge from the hip forward and slide down until your elbow are resting on the inside of the knees with back straight and hips back like you are a downhill skier.  This will require your knees to track forward over and maybe even slightly beyond your toes (this will generate a stretch in the calf muscles and specifically the single joint soleus muscle).    Keep your heels down the whole time – do not let them lift up off the floor!
    Keeping the back totally straight extend the knees as far as possible – you should feel a strong stretch in the hamstrings.  Your hips will rise but keep your elbows on the knees and do not move the upper body!  Then drop the hips, flex the knees and let them move forward over toes as you drop back down to the downhill skier posture.
    Start slow but as you get the hang of it you can move faster – as long as you maintain proper form.     Do 30 – 50 reps every day.   You will start to notice that your squat and your hip hinge movements all get easier along with improved mobility in the ankle knee and hip!   Click here for a great video of how to do this exercise properly:  https://youtu.be/nXKWtlr3rBQ
    Goblet Squat – Squats are another primal movement pattern and goblet squats help emphasize the best form.   They should be done daily with a relatively light weight for a good 20 – 50 repetitions.    Keep the dumbbell, kettlebell or Sandbag held against the chest the entire time. If you have difficulty getting thighs parallel to the floor spread your feet farther apart, and also rotate out at the hips so that your feet are pointing outwards.   This can make a huge difference.   By doing this and holding a light weight against your chest you may find you can squat to a decent depth while maintaining an upright torso.  It should look like this:  http://cfitness.me.formecdn.com/2016/12/goblet-squat.jpg  
    Alternatively you can hold a kettlebell/Dumbbell with both hands letting it go straight down between the legs as you squat down like this:  http://workoutlabs.com/wp-content/uploads/watermarked/Pile_Sumo_Dumbbell_Squat1.png
    Single Leg RDL – Romanian Deadlift – is one of the most important corrective exercises you can do to help self-identify and correct muscle imbalances that are the most common cause of movement dysfunction and injury.
    The best way to do this exercise is barefoot in front of a mirror where you can see your whole body throughout the entire sequence of the exercise.  Ideally you should be on a firm and level surface as well.
    Start by facing the mirror standing on one foot with the other leg flexed so your thigh is parallel with the floor and knee flexed to 90 degrees with hands on your hips.  Look in the mirror and make sure your hips are perfectly level and if not fix that!   
    Next, without moving the upper body extend the flexed leg down and hinge forward at the hip of the standing leg.   As your swing leg passes the other leg you should try to straighten it, and ideally you hinge forward at the upper body while keeping your swing leg and upper body in a straight line the whole time.
    As you hinge try NOT to let your swing leg hip drop and keep your stance foot pointing directly forward with no angle.  The stance leg should flex slightly but the knee should NOT move forward – rather you should “sit” back into the hinge at the hip. Pause when you reach at or near parallel with the floor with your upper body and swing leg then smoothly return to standing and flex the swing leg.    Slower is harder AND better and do NOT use any load/weight.
    10 repetitions on each side each day!   Do all 10 on each side one time per day and you will see some amazing changes in your strength, balance and athleticism! 
    Here is a great single leg RDL tutorial:  https://www.youtube.com/watch?v=vc21IwnIcwk
    Hip Thrusts – The hip thrust simultaneously develops the glutes while enhancing mobility in the hip flexors (both key because this counteracts the negative effects of sitting all the time!).  These can be done on the floor or with shoulders on a bench, bed or sofa to make it a bit harder.   You can do hip thrusts with two legs or one leg at a time to create additional load.   Here is a good shot of the exercise:  http://cdn-www.womenshealthsa.co.za/wp-content/uploads/2015/02/hip-thrust-hold.jpg
    Important NOT to arch lower back at all and concentrate on squeezing glutes at top and NOT using low back.    Even without any load this exercise can produce great benefits – 20 – 50 reps each day!
    Plank – The plank is a simple functional core exercise that produces great benefits.  It can be done on toes and hands (upper push-up position), Toes and Elbows, Hands and Knees, etc to adjust the difficulty.    Do a version of the plank that challenges for one minute per day while maintaining good form.   Here is a great article on some of the many variations:  http://www.health.com/health/gallery/0,,20813896,00.html/view-all
    Side Plank – The Side Plank is also key to building core strength, but in the front plane (side to side stability and strength).   30 seconds to a minute on each side each day.   Like the plank there are many variations and one of the best when you are ready is a side plank with leg lift: https://rutheburke.files.wordpress.com/2015/05/side_bridge_abd.jpg
    Static Lunge – Lunges are another primal movement pattern, and there are many different variety of lunges.  A static lunge is done with feet in a split stance like this:    https://www.google.com/imgres?imgrefurl=http://thefitnesslink.uk/exercises/static-lunge/&tbnid=J1sOV9EYH0PmVM:&docid=lgeVWz3ThLe7OM&h=1417&w=1890   
    The exercise is fantastic for simultaneously developing strength and mobility in the foot, ankle, knee and hip.  Best done barefoot on a firm surface.  Keep your front heel down the entire time and rear foot is up on ball of the foot with rear knee, hip, back and head kept in alignment the entire time.    Do 10 reps at a time on each side per day – no weight is necessary. 
     
    Side to Side Skater– This exercise develops hip mobility including providing an excellent dynamic stretch/warm-up for the adductor (inner thigh muscles).  Feet should be wide apart with feet facing forward – not angled out. Keep feet flat on the floor and flex forward at the hip keeping back straight (only flex forward as far as you can while maintaining a flat back and keeping both feet on the floor with entire foot kept down in contact with the ground).   Push the hips directly to the side and pause as you feel a stretch in the trailing leg’s adductors.  
    Ideally your head and torso stay perpendicular to lower body and centered during the entire exercise just like a speed skater.  Then push your hips back in the other direction to the other to the other side.    NOTE:   Do NOT go up and down – your hips should go back and forth in a straight-line parallel with the floor.   Do 20 – 30 reps each day.
    Ankle Circles – This exercise improves ankle mobility and is great before just about any activity.    Stand on one foot.    These can be done seated, standing or lying down – best done standing to simultaneously work on balance and stability.  The action is simple:  holding foot and leg in the air draw a circle with your toes for 10 circles in one direction and 10 circles in the other direction like this:  http://web.eccrsd.us/christy/public/athletic_training/ankle_sprain_rehab_beginner_files/Picture%201.jpg   
    You will notice that one direction is much harder than the other and you will feel much less coordinated and same thing with one leg vs the other leg.  Do more repetitions in the direction that is challenging and more on the leg that is more challenging.  Ideally do the exercise while you stand on one foot while you pull your other leg up with knee bent so that your thigh is parallel with the floor.    This is more challenging than it looks but will provide big benefits in terms of balance and stability.

    Done daily and before workouts these 10 exercises will provide big benefits including improved posture, stability, strength and mobility.   You will also notice that you improve at many other exercises and movements.

    Peanut Benefits for Health

    PEANUT BENEFITS FOR HEALTH

    Peanut Benefits for Health – Peanuts are legumes that take the benefits to the area of the roots are forming pods, do you know if the bean plants it has the advantage of a very remarkable in the area of agricultural land, the reason is because the beans are plants that collaborate with types of mycorrhizal fungi to synthesize N in the air become available to the plant, N that includes nutrients that are needed by plants in large enough quantities, land former planted beans have levels of N were pretty much up intake N for the next crop is still there. Not only useful for agriculture, but peanuts also have benefits for our health.
    Peanut Benefits For Health - 1
    Now let us try to discuss specifically about the benefits of the bean plants to our body and how much is the benefit that we can take from this pod peanut plants. Consider the benefits of peanuts below:
    Peanut Benefits for Health
    1. Helps To Increase Fertility
    For you are the woman I’m sure you’ve got the point. Peanuts contain folic acid, according to research women who ate peanuts 400 micrograms of folic acid have a lower risk of having a baby born with a serious neural tube defects up to 70% at the time before pregnancy and early pregnancy
    2. It Can Prevent Painful Gallstones
    During 20 years of research have shown if by consuming 1 ounce of peanut butter a week can reduce the risk of developing gallstones by 25%.
    Peanut Benefits For Health
    3. Can Help Reduce Depression And Stress
    Peanuts are a good source of tryptophan, the role of these substances can increase serotonin antidepressant effects (which can affect the atmosphere in the heart) if there is an increase in the amount of serotonin in the blood.
    4. Can Improve Memory
    The beans have a content of vitamin B3 or also often called by naisin content is also beneficial to maintain the health of the brain and improve memory.
    5. Lowers Bad Cholesterol
    Peanuts contain cholesterol substances that are good for our bodies, as well as the good cholesterol can reduce cholesterol levels and can control the evil by means of dominating it.

    Hopefully article Peanut Benefits for Health can we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    And More: How To Pronounce “ASUS” (Text-Only Version)

    This is a subject that is only lightly debated on the odd game or tech forum, and like the ‘how to pronounce GIF’ argument/discussions, I almost don’t want to clear things up… but as with my earlier article on ‘How To Pronounce “GIF”‘ [found here: http://gametipsandmore.blogspot.ca/2013/05/and-more-gif-is-pronounced-jiff-like.html ], I suppose with only this little post on this lowly blog that is mostly about games (with the odd article on editing), I won’t really change things.. so here’goes:

    The reason this came up at all, was that I am increasingly hearing people say their differing versions of how to pronounce the word in videos. Although most people seem to utilize either (i)“ay-zeus” (which sounds like saying, “Hey, Zeus [the Greek ruler-god of the sky], how are ya?”), or they say (ii)“ay-suss” (which sounds like a way of saying, “hey, sis, how are yah?”), some even say (iii)“ass-uhs” (which sounds like “Ask us a question” (with a silent k) or almost like “Asses” but with an ‘ugh’ at the end) [although I think that last version is just an excuse for some to say “ass” while at work, haha]. While I myself was mainly using the second version since I started working as a Computer Service Technician, there have been a couple of “Official” sources published on the intertubes since then.

    Wikipedia, [arguably] a source of good information [I say arguable because ‘anyone’ can edit it to say almost anything, many people with their own agendas; but mainly it remains a source of ‘good’ info], lists phonetics for the word’s pronunciation in their article as: (/ˈss/), which is closer to the first form (i) from above, than the others (but with a softer ‘s’ sound than a ‘z’ sound)..

    Engadget, a technology and-related-science information site, posted a video in 2010 [found here: http://www.engadget.com/2010/12/17/how-to-pronounce-asus-video/ ] which gives a “from now on”/Official way of pronouncing the company’s name, from the company itself: “ay-suss”, which is closer to the second form (ii) from above, than the others.

    Prior to this, around the turn of the millennium, I myself was searching for some ‘official’ form of how to say the word, and the only source at that time was the ASUS website, which stated that the name came from the concept of the Greek mythological creature, Pegasus. This suggested to me (there was no ‘official statement’ on the website itself of pronunciation) to say, “ah-sus” (the second half of the name Pegasus), which is actually closer to the third form (iii) from above, which sort of sounds like “asses” but with more of an ‘uh’ sound near the end instead of an ‘eh’. This is how I would type it: “ah-sus”.

    So where does that leave things today and how is ASUS actually pronounced, then?

    Since there has been an ‘Official” statement, with example, we have no choice but to go with Endgadget’s exposé on the issue, which gives the pronunciation of “ay-suss” (ii).
    What is important to note here though, is that it is not just said the way it is typed here. In the video at Engadget’s site, the woman demonstrating the Official way to say the word purses her lips when she says, “suss”. Therefore, it is not just a plain “suss”, it is more akin to “soos”, which sounds almost like the Dr.Seuss name that is on all those kids’ reading books.
    If you ask me, this makes things a little more confused than it should be, because the sound [I don’t know the phonetic symbol for it offhand but it is present in how French-speakers say the letter “Y” in their alphabet, with pursed or puckered lips] is almost exactly between “suss” and “soos”, and yet it is neither of those.
    At least the video does clear up one thing: the beginning of the word ASUS. It is not “ah” (short form of the letter A) it is more like “ay” (long form of the letter A). So then, the officially-demonstrated way of saying the company name is:

    “ay” (almost, but not quite, the long form of the letter A) and then a sound that is exactly between “suss” and “soos” (with pursed/puckered lips)


    That ended more complicated than I thought…

    Personal Note/Opinion:

    While that issue is now solved and ‘written in stone’, as it comes from ASUS itself (thanks mainly to Engadget), I have to end this post saying that I am left wondering why they changed the pronunciation from [what appeared to be] their etymological starting point. What I mean is: their website states the name came from the name “Pegasus”, but [in English anyway] we do not say “peg-ay-suss”, we say “peg-ah-suss”.
    Nevermind, I think I just figured out my own query, just by typing that in and saying it out loud: I believe that they changed the pronunciation from [how we say the mythological creature’s name in English] “ah-suss” to something more akin to “ay-suss” to distance themselves from the sound of, well, “asses”. I guess I can’t say I blame them. 

    I hope this article has helped, even if it only made things more complicated. That’s helping, isn’t it?

    This has been a Public Service Announcement by The Game Tips And More Blog

    9 Benefits of Orange Jasmine for Health and Beauty

    9 BENEFITS OF ORANGE JASMINE FOR HEALTH AND BEAUTY

    9 Benefitsof Orange Jasminefor Health and BeautyOrange jasmine (Murraya paniculata L.) usually grows wild on the edge of the forest, in the undergrowth, and guardrail garden and planted as an ornamental plant in the yard. Such as ylang and jasmine flowers, yellow flowers are also often used for traditional medicine. Parts of plants that can be used is the leaves, twigs and roots. Skins and stems are also useful for medicine.
    Leaves and twigs are useful in overcoming inflammation of the testicles (orchitis), could also overcome inflammation of the airways (bronchitis), urinary tract infections, gonorrhea, vaginal discharge, and come irregular menstruation, body fat overload, and slimming the body, pain ulcer (ulcer), dental pain and soften the skin.
    9 Benefits of Orange Jasmine for Health and Beauty - 1
    Its roots are also useful for treating bruises caused by collision or hit, rheumatic pain, sprains and insect bites and poisonous snakes, boils, eczema and scabies. While the bark is also useful to overcome tooth pain, pain due to open sores in the skin or mucous membranes (ulcers).
    1. Can Smooth Skin
    Yellow leaves are still fresh as much as 30 g washed and then pounded until creamed. Add 1 cup of water was while in the mix with the average. The material is then scrub the skin before bedtime.
    2. Can Smooth Menstruation
    Yellow leaves and leaves of henna (Lawsonia inermis) each fresh ingredients as many handheld ½, 1 finger rhizome of ginger leaves, washed and cut into pieces as needed. Add 3 cups water was then boiled until the remaining 1 cup water. After the cold filtered water, then drink 2 times a day, each ½ cup.
    3. Treating Urinary Tract Infections
    Yellow leaves are still fresh as much as 35 g washed and then add 3 cups water. Boil until the water remaining half. After all cold filtered and taken 3 times a day, each is ½ cup.
    4. Inflammation of the Testicles
    Provide 9 sheets of yellow leaves are still fresh as much as 60 g and bitter herbs as much as 35 g washed and then boiled in 3 cups water until the remaining 1 cup water. Once everything is cold filtered, then taken 2 times a day, each ½ cup. Do it every day until cured.
    9 Benefits of Orange Jasmine for Health and Beauty - 2
    5. Can Slimming Body
    Yellow leaves are still fresh and the leaves of noni (Morinda citrifolia) each and a total of a handful of Intersection dribbles too much as half a little finger until finely ground. Add 1 cup cooking water, stirring until evenly distributed. Wring with a piece of cloth. Water that is collected while drunk in the morning before eating.
    6. Can Treat Toothache
    Oil that comes out of the bark of yellow flowers are already burned dripped on the hollow.
    7. Can Treat Arthritic Joints
    Orange Jasmine root and root (Lantana camara) washed, then add 3 pairs of chicken legs. And all the ingredients are cut into pieces as needed and then add enough water to be submerged. All the ingredients are then cooked. Once cooked and the water is drunk warm.
    8. Can Heal Bruises
    Orange Jasmine and glass plate, respectively, and the fresh leaves, the same lots, washed and then finely ground. Add some wine while stirring on a fire. Then Warm taped at the bruised body.
    9. Can Treat Boils
    Dried yellow root that is as much as 30 g washed and cut into pieces as needed. Boil 3 cups of water until the water boiled only the remaining l glasses. Once cool then filtered then drink. In day 2 times, each ½ cup.

    Okay, that was it some yellow flowers benefits as a traditional medicine to cure various diseases. Hopefully article 9 Benefits of Orange Jasminefor Health and Beautycan we share today can be beneficial for you. Do not forget to always visit the website abouthealthbenefits.xyz to seek other health articles. Thank You.

    Choosing a Sensible Diet, Healthy Appetite

    So you like to eat! That’s normal. A healthy appetite is one of the greatest assets in life. The whole body seems to respond to the sight, smell, and taste of a well-prepared meal. Every organ responds to the occasion. The glands work more vigorously, the digestive organs operate more efficiently, and the nervous tensions relax. That is why eating is such a pleasure, especially when you are healthy.

    Many people, however, are neither sick nor well. They are somewhere in between. They drag themselves around, feeling half dead much of the time. Yet, they are not sick enough to go to bed. What is the cause of their trouble? Many times it is due to a faulty diet. Some victims of nervous conditions could be completely cured if they would only learn to eat properly. The same is true of many others who suffer from digestive complaints. They could all find relief from their miseries by choosing better meals.

    So much depends on the right choice of food. This human body in which we live is a superb machine. It is capable of operating smoothly for seventy or eighty years, provided that we treat it well. But if we fail to supply it with the materials it needs, the results may be well-nigh disastrous.

    Every time we open our mouths to eat we make an important decision concerning our future.

    Good health always begins in the garden. A well-balanced diet naturally includes plenty of wholesome fruits and vegetables.

    Diet Start

    What we choose to eat will either help to keep us strong and healthy or it will leave us weakened and less prepared to meet the stress and strain of living. The kind of health and the length of life we enjoy probably depend more on the type and quality of foods we choose than on any other factor. The choice is up to us.

    It was the Creator’s plan that the foods we eat should keep us young and healthy. Many bring on premature old age by wrong eating habits.

    Unfortunately, a great many people never give much thought to their diet. They will eat anything they can get their hands on or that may appeal to their perverted appetites. In their minds one thing is as good as another—or as bad. They will eat at any odd time whether they are hungry or not. No wonder they are sick! The human digestive system was never intended to sustain this kind of abuse.

    Don’t Be a Faddist

    On the other hand, there are some who react quite differently. They take great pains regarding what they eat. They are so careful to avoid anything that they suspect might cause them trouble. They are so particular in everything they do. Every now and then they go on some newfangled diet in the hope of winning back their lost energies. This means that they often deprive themselves of the very things they so much need. Such people are slowly starving themselves in the midst of plenty.

    In most cases there was nothing radically wrong with such people. They simply didn’t know how to feed themselves in a proper manner. They were not intelligent on some of these most vital issues of life.

    It should seem perfectly obvious to everyone that our bodies are built up entirely from the things we eat. We have no other way of getting these important substances into the system. Yet how few of us really think very much about this. To keep well we must develop different tastes. Our appetites need to be educated. For instance, we must realize that we cannot continue to eat devitalized foods without paying for our folly.

    Foods that are highly flavored with sugar and condiments are usually devoid of some of the most important elements needed by the body. The seasonings often cover up the natural flavor to satisfy an abnormal appetite. But such foods may be completely lacking in the vital elements necessary to maintain a person in good health.

    Rules for Choosing a Sensible Diet

    Choosing a sensible diet is not so difficult. There are a few simple rules that anyone can follow. First of all, it is important to have plenty of variety in your diet. Don’t be satisfied with the same old humdrum meals. Look around for something new and different—avoid monotony. Find new ways of preparing food. It is a fact that the more variety you have, the less you are likely to suffer from some dietary deficiency.

    The second rule is to learn something about the different materials your body needs. For instance, if you are going to build a house, you will have to buy certain supplies, such as timber, glass, bricks, plaster, nails, paint, and many more. In the same way the human body needs different building materials for the important job it has to do. These things are essential at every age of life, but more particularly during those rapidly growing years of childhood and youth. They are also necessary when one is recovering from some serious illness or injury, or during pregnancy and lactation.

    What are these different materials? Doctors refer to them as proteins, fats, carbohydrates, amino acids, vitamins, minerals, and water. These are the materials of which the body is composed. They are present in our foods. When these various substances are absorbed into the blood stream, they are usually stored in the liver and other organs until they are needed. With the exception of water, each must undergo certain changes before being used in the human system. Myriads of chemical reactions are taking place within your own body at this very minute. This is what keeps you healthy and strong, so that all your organs will be working at full capacity.

    From our foods we get the materials out of which the bones, muscles, nerves, skin, and all the internal organs are formed. From our food we also derive the energy we need in carrying on all the activities of life. In addition, we must have other important chemicals that are needed to regulate the activities of every organ in the body. Unless these materials are present in our daily diet, we are likely to suffer from some deficiency. Sooner or later we will find ourselves in real trouble.

    The average diet of many families today is lacking in certain of these nutrients. Sometimes the trouble is due to insufficient protein. At other times it may be a loss of vitamins or minerals, which may have occurred during the preparation of the food. Some people try to make up for a deficient diet by taking extra vitamins in the form of pills. These may help, but they will never take the place of good food in supplying the needs of the body. There is always danger in trying to follow some haphazard, unbalanced diet. Only a sensible way of living will enable us to enjoy a full and satisfying life, free from diseases that could have been avoided.

    Chronic Illnesses and Diet part 2

    Chronic Inflammatory Illness and Insulin Resistance

    Allowing for the fact that genetics affects an individual’s susceptibility to disease, the roots of chronic illness often lie in deficiencies of various nutrients, other dietary issues and hypersensitivity to foods and environmental factors, such as toxins. Whichever of these factors apply to you or your family, insulin resistance may be the easiest to recognize and correct. When you have this condition high levels of insulin, created by frequent intake of carbohydrates, spill over into biochemical injury that makes whatever you have worse. This can include asthma, eczema, colitis, depression, headaches, psoriasis and much more.

    What is common to all of these problems is inflammation. Whether you’re looking under the microscope or studying its basic chemical reactions, inflammation is the same, wherever it’s found. Chronic cough and mucus; sore, swollen, stiff joints; cramps and diarrhea; a chronically red, itchy rash; or periodontal disease — all are inflammation. Even cardiovascular disease, which used to be called hardening of the arteries and is now called atherosclerosis, is recognized as a fundamentally inflammatory process.

    Diet Start

    The first step in the biochemistry of inflammation is the release of informational substances from injured cells that attract the attention of healing mechanisms, the way a phone call to the automobile club brings you roadside assistance. The aid mobilized by these cellular calls for repair work is usually limited to the immediate task at hand; it’s designed for mending a cut or recovering from a burn or fighting infection. But if the agent causing the inflammation persists or if something goes wrong with the signaling mechanisms involved in the call for help, the repair work and its accompanying signals (pain, swelling, redness and heat) may become stuck, leaving you with a chronic inflammation. Chronic inflammatory diseases are often described by medical terms that end in Itis’ and ‘,psis’.

    Because the signaling mechanisms involved in chronic inflammation may be distorted by inappropriately high insulin levels in your body, this is something over which you have control. Controlling insulin levels through appropriate dietary changes, including reducing carbohydrate consumption or shifting most consumption of carbohydrates to the later part of the day, will result in a positive effect on the biochemistry of inflammation. Although this dietary change is not directed at a specific disease, it should be part of any comprehensive treatment since it is aimed at easing the predictably disordered chemistry of anyone with a chronic inflammatory illness.

    Medications that simply squelch the inflammation may not always be the best course of treatment. Granted, there are instances in which the cause is long gone but the body has gotten stuck in some kind of inappropriate reaction. In these cases, subduing the symptoms temporarily may work. But it’s different when it comes to the daily, long-term application of steroid creams or the consumption of systemic steroids or anti-inflammatory drugs. These treatments have some fairly dreadful gastrointestinal side effects, including the tendency to create leaks in the intestinal walls that allow the entry of unwanted toxins, chemicals and allergens into the bloodstream.

    The Body Clock Prescription for Treating Chronic Illness

    Chronic illness makes you listen to your body. The message is not so precise that you know exactly what to change, unless of course it’s something like chronic cough in a smoker. Most of the time, chronic pain or other signs of inflammation don’t announce their cause. They demand that you do some detective work, presumably with the help of a professional who has good instincts and expertise at reading your body’s communications by carefully listening to your story, interpreting laboratory tests and then making educated efforts at trial and error.

    Anyone with a chronic illness has to be especially aware of the second Tacks Law: if you are sitting on two tacks, removing only one does not necessarily make you feel 50 per cent better. This means that insulin resistance is just one of many manageable factors that may also include improving other aspects of nutritional status and looking for the trigger, irritant, allergen, toxin or germ to which your body may be responding.

    Doing the detective work required to find underlying triggers of a chronic illness may take a long time; nor is it always successful. As a more generalized strategy, the ten steps of the Body Clock Prescription will not only prevent or tame insulin resistance, a major contributor to chronic illness, but will reinforce healthy body rhythms and foster rhythmic integration. Remember that flexibility is your body’s treasure; it enables you to be more like an orchestra, with its constant active effort to stay in tune and on beat, than a mechanical system. The same flexibility that allows you to fall victim to the negative effects of poorly timed eating, breathing, exercise or exposure to light also permits you to use such influences for your benefit.

    Math Resources for Teachers

    It has been a whirlwind couple of weeks! I went on a mini-vacation to a wedding in Nashville, and then I attended a 3-day workshop on The Role of Mathematics in the International Baccalaureate Primary Years Programme. I think this is the summer of math learning for me! I love attending workshops because I almost always leave with new ideas and new resources to explore. Even if you don’t work at an IB school, there were lots of useful resources worth exploring.

    (Apologies in advance — this will be a long post!)

    Book Resources

    A Mathematical Passage: Strategies for Promoting Inquiry in Grades 4-6

    This book was featured because of it’s Mathematician’s Bill of Rights on p. 139. The Bill of Rights lists the “rights” that all mathematicians have — things like “solve problems in ways that make sense to me” and “capitalize on mistakes as sites of learning.” I’m definitely interested in reading more from this book. I’ve read other things by David J. Whitin before, and they’ve been great.

    Math Matters: Understanding the Math You Teach Grades K-8

    I had a chance to browse this book during the workshop, and it looks like a good one for understanding how to approach math conceptually. May not be the most exciting read in the world (would you look at that front cover?!), but it looks like a very useful book if you’re going for an inquiry oriented math classroom.

    Good Questions for Math Teaching



    This book is great for creating open-ended questions that will really get students thinking about the math involved in problem solving rather than just looking for a specific answer. It uses questioning techniques to develop more sophisticated mathematical thinking, and it has a wealth of information.

    Number Talks

    I was a little surprised how many teachers at the workshop were already familiar with this book and using it given that I’m usually up on all the latest and greatest math books, but nevertheless, this book had rave reviews. Of all the books that I’m reading this summer, this is the one that I suspect will have the biggest impact on my teaching this August. I’ve really enjoyed reading it, and I have so many ideas about how I will put it into practice this year. If you haven’t gotten it already, I couldn’t recommend it more!

    Good Questions: Great Ways to Differentiate Mathematics Instruction



    I know I’ve talked about this book before, but we spent a lot of time talking about open questions and parallel tasks at the workshop, so I had to share this book again. I used this book non-stop at the end of the school year, and I loved how it was so perfectly aligned to Common Core in math. It couldn’t be more teacher-friendly.

    Online Resources

    Visible Thinking Routines

    I’ve been introduced to the Visible Thinking Routines from Harvard’s Project Zero before, but it was good to be reminded about them. These are some great activities to prompt student discussions and thinking. One example of this is “OTQ – Observe, Think, Question.” For this activity, students see a picture and spend a few minutes describing what they see/observe. Anything they observe has to be rooted in the picture and not based on inferences. Step 2 is “Think” – what does this make you think about? This is where students can share their inferences and cite evidence in the picture to support why they think that. Finally, students “question” and share what they wonder about based on the picture. I like that these routines slow down student thinking.
    Math Class Needs a Makeover

    We watched this video in the workshop, and if you’ve never seen it, I highly recommend that you take the 10 minutes to watch Dan Meyer’s TED Talk. In it, he talks about the problems with current approaches to math instruction — largely fueled by larger textbooks and math programs — and how to turn those materials into the types of problems that will challenge your students to become patient problem solvers. I was really inspired by this video, and I hope that you will be, too.

    Have a great weekend! I’ll be back to blogging more regularly next week!



    Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and/or believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”

    The Benefits of Jump Training

    Watch a group of kids and you will likely see bobbing heads – kids love to jump and there are good reasons for them to jump.   A key aspect of human movement is learning to store energy and then reclaim it as part of a movement cycle. For example up to 40% of the energy required for movement during walking and running is created by storing energy in the leg muscles as the foot lands and then using it during the push-off phase.  The technical name for this cycle is the “Stretch-Shortening Cycle” or SSC.  The SSC takes advantage of the fact that muscles can act as springs:  they store energy as they are lengthened then rebounding in the opposite direction as they get shorter.

    Efficient movement takes advantage of the stretch-shortening cycle and muscles are designed to store and release energy in a rhythmic pattern of loading and unloading just like loading and unloading a spring.  In addition, power for all athletic movements is generated by taking advantage of the SSC.     A key aspect of getting the most from this cycle is rhythm and timing which are learned through repetition.
      
    There are three distinct phases to jump training:

    The Loading Phase – such as landing phase of walking and running where the muscles lengthen under tension to absorb the landing.
    The Amortization Phase – where the muscle transitions between loading phase and the Unloading phase.
    The Unloading Phase – where the muscles shortens and transfers the stored energy externally like a spring recoiling such as the push-off phase of walking and running.

    Jumps can be little – like jumping rope or big – like box jumps.  Start with little jumps.  A great place to start is jumping rhythmically in place with both feet with short fast jumps.   You want to land on the ball of the foot and flex your knees when you land and let your heels just kiss the floor then jump up again and repeat.  Start with really tiny jumps and try to let the elasticity of your calf and quad muscles do the work – done properly it should feel relatively easy.   It will take several weeks to condition the muscles of the foot and calf to be able to do longer sets so take your time.  In addition there are many benefits to performing this training without shoes so the muscles of your foot get conditioned and you have a better feel of the ground.

    It is also important to insure your knees track over your toes and do not collapse inward so do short sets (30 seconds or less) of low, fast jumps on both feet and learn to feel the rhythm of the cycle of landing and push off.

    Once you master this you can add more height to your jumps after you are warmed up.   Stop each set if you start feeling tired or feel unstable, and recover completely between sets.  Do NOT do jump sets to failure. Eventually you can progress into full squat jumps.   However remember the key to capturing the benefit of the stretch-shortening cycle is a quick rebound after landing.  So if you go too low in the loading phase the pause between landing and rebounding will be too long and you lose the benefit of the stretch-shortening cycle.

    Over time you can even progress to single leg jumps or box jumps where you jump down off a height to the ground/floor then land and rebound up.  Take these progressions SLOWLY – it is important to build the elastic strength of the muscles in your foot, lower leg, and thighs over time and stopping BEFORE you are exhausted will prevent injury.  This is why kids naturally like to do short sets of jumps repeatedly – it feels good when done properly!

    There are many benefits to jump training including:

    Toning the lower body – jumping recruits all of the major muscles of the lower body while at the same time being the ideal stimulus to build bone strength.

    Jumping burns lots of calories – once you can build up to being able to do 1 – 4 minutes of continuous jumping like jumping rope you can really rack up the calories!

    Jumping pumps up the cardiovascular system – as above once you can jump safely and in good form for 1 – 3 minute sets you will not believe how high your heart rate gets!

    Jumping also demands great balance and stimulates fast-twitch muscle fibers.   Fast-twitch muscle is the type of muscle we lose quickest as we get older.   Fast-twitch fibers are not just important for athletes – they are important for preventing falls because the ability to produce force quickly is important to be able to react quickly when your balance is unexpectedly challenged like stepping off a curb you do not see!

    Jumping is the best way to build the strength of bones – bones need impact and force to stay strong. The key is starting with small jumps and gradually building the height of jumps and time spent jumping.

    There are many ways to build jumping into a workout such as doing some skipping drills which can even be done on a treadmill safely once you get the hang of it.


    It is also worth working with a trainer to help you develop proper jumping mechanics and the stability you need to land properly which are pre-requisites for safe and effective jump training.

    Interested in opening your own WORKOUT ANYTIME?

    Think big. Keep it simple. Do it with integrity.”

    Those are the guiding words of John Quattrocchi, co-founder of WORKOUT ANYTIME. Together with Steve Strickland, John and Steve have drawn from their 40 years of industry knowledge to create a proven, ready-to-run business opportunity for your success.

    Proven Formula – The WORKOUT ANYTIME system operates with low-overhead and delivers high customer satisfaction. Our clubs fit into a range of retail spaces, can be run by a tiny staff, and offer the best workout per square foot in the industry. Unprofitable amenities like the pool, spa, courts, aerobics classes, and childcare have been eliminated in favor of a $15 no-commitment price that keeps members onboard month after month after month.

    “People join a club to lose weight, build strength and feel better,” explains CEO Steve Strickland. “But eventually, they fall off because of two things: high price and inconvenience. We built a system that offers an unbeatable workout, an inexpensive recurring payment, and 24-7 neighborhood convenience.”

    Matrix Equipment – Top equipment is a crucial component of the WORKOUT ANYTIME formula. Steve Strickland’s career experience in both the equipment and club sides of the industry has guided the equipment selection and floor plan. The WORKOUT ANYTIME fitness layout ensures that members never have to wait for the much-desired Matrix treadmills (10+) and cardio gear.

    Easy to Get Started – Franchisees usually join WORKOUT ANYTIME with little or no experience in the fitness industry. Some even keep their existing jobs. Yet, our turnkey systems, vendor agreements, equipment sourcing and leasing support make it easy to get started and easy to succeed. Here’s how our ready-to-run approach guides you every step of the way:

    Site Selection and Lease Negotiation

    – We maintain a network of experienced real estate brokers nationwide who specialize in tenant representation
    – Site selection/lease negotiation service offered at no-cost to franchise owner
    – In most cases WORKOUT ANYTIME Franchisees receive a generous tenant improve allowance (cash), and up to 6-months free rent per deal
    – WORKOUT ANYTIME’s site criteria includes demographics, access, parking, visibility, tenant mix, competition, and the economics of your club

    Find out more here. 

    The Elder Scrolls Online – “PatchManifestError” In TESO Launcher [Workaround]


    [Text-Only – This post is initially Text-Only, to allow posting this as fast as possible, to help others.
    I may return and add additional graphics/screenshots pertaining to the article… Soon™]


    Just now, I ran into an issue starting up TESO, where the Launcher gave an error message – oddly, it was slightly different than the message my Gamer Wife beside me got – one of us got “Error 210” while the other got “Error 206”. Here is an example of what the Error Message within the TESO Client Launcher looks like:



    Popping into the Steam forum and the Official Bethesda/Zenimax Forum for the game, I saw a number of people mentioning they are getting this too, just today, like me. So, I wanted to come here and post a ‘quick fix’ that can get past the error message and allow fellow gamers, like me, to be able to play the game as quickly as right now, tonight [actually it’s more of a ‘workaround’ than a true ‘fix’, as it doesn’t solve whatever issue is happening with the Launcher/Client/Servers… I will post this as a “Workaround”].

    Similar to an earlier issue with the TESO Launcher I talked about here at The Blog, the ‘workaround’ involves bypassing the Launcher itself and starting up the game manually via the Executable files… The instructions to do this are below.

    For the Steam Version of TESO:

    • Open Steam
    • Right-Click on TESO in the Library and choose Properties
    • Click on the “Local Files” tab
    • Click on the “Browse Local Files” button to show the directory/folder of the game
    • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
    • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game

      For the Standalone Version of TESO:

      • Right-Click on the Shortcut (the icon that runs the game) on the Desktop (or in the Start Menu) for TESO and choose Properties
      • Click on the “Open File Location” button in the Properties of the game shortcut
      • You should find yourself in a Windows Explorer windows, looking at the “Launcher” folder of Zenimax Online
      • Go up one folder level to “Zenimax Online” (click on the Zenimax Online folder in Explorer)
      • Navigate into THE ELDER SCROLLS ONLINE > GAME > CLIENT folder
      • Double-Click on “eso64.exe” to launch the game (or “eso.exe” if running 32-bit Windows/Game)
        That’s it! Now the game should start up and you will just have to Login within the game itself.

        Unfortunately, I do not know what has caused this error, and I have not seen any Official Postings by Bethesda/Zenimax to explain it, as of the time of this writing. Although it appears to be some sort of Server/Launcher error, I cannot say specifically at this time. However, having testing this Workaround on different machines and with both the Steam Version of TESO and the Standalone/Web version of TESO, I can safely say that this should work for you, fellow gamer.

        Hopefully that helps – and See You In The Game!

        The Easiest Way to Implement a Classroom Economy

        As my life continues to get crazier, I am constantly looking for ways to simplify and improve the things that I do. This year, for example, I decided to merge Class Dojo with my classroom economy, and so far, it’s going very well! Here are some of the tweaks I made to make this merger work.

        My Classroom Economy

        I’ve been using a classroom economy since I started teaching, and every year, I make a few tweaks. The basic idea is that every student applies for a class job at the beginning of each term (our terms are 6 weeks long). I’ve previously posted about my classroom jobs here. I display the jobs in my classroom so that we’re constantly reminded who is responsible for what. This year, I’ve used a pocket chart for my classroom jobs (sorry for the blurry photo).

        I used to give students $100/week as their salary, or about $20 per day. They’d have weekly and monthly expenses, and then they could use any remaining money to purchase items in our class store. The complete program is detailed in my Classroom Economy Megapack on TpT.

        I love the system, but I felt like I wasn’t as consistent as I wanted to be in tracking student behaviors to give fines or bonuses, and there were many Friday afternoons when I was so involved in whatever we were working on that day, that I just didn’t leave enough time for them to shop. 
        Meanwhile, I was dabbling with Class Dojo, and I wanted to figure out a way to tie that in as well. If you’re not already familiar, Class Dojo is an online behavior management system that allows you to give and take away points from students. You can create your own categories for points, and you can access the class info from any device — laptop, computer, iPad, iPhone, etc. I liked that portability because I always have one of those devices in my hands, and I could give or take away points without really interrupting what I was doing. 
        The solution came for me this year when Class Dojo allowed for the creation of weighted point values! Before, you could only give or take away a single point at a time. Now you can create points on a scale of 1-5 and weight particular behaviors accordingly. This is done in the set-up for behaviors. 
        1. Go to Edit Class on your class screen and select “Edit students and behaviors.”


        2. Select “Behaviors” and either click on one of the exiting behaviors, or the plus symbol to customize the behaviors.


        3. Change the icon (optional), name or rename the behavior, and then click the box to access a pull down menu of point values to weight that item.

        And that’s it! You can weight both the positive and negative behaviors according to your needs. Here are the settings I have now for my classroom economy.

        I basically divided the $100 weekly salary by 10, and scaled everything else back the same way. Students now get 2 points daily for their salary (10 points per week) and bonuses for different behaviors. The only other positive behavior that I’ve weighted more currently is helping others because I’m really trying to encourage that in my classroom. I’m also going to add a +4 for a class compliment because I like when they do a good job with other adults in the building.

        For negative behaviors, I deduct more points for breaking rules outside of my classroom and for disrespecting people or materials. I also now deduct their taxes and rent through Class Dojo, and when they shop, I deduct their points in here. I price everything in multiples of 2, but then I found that I wanted a -5 shopping once they had enough points for some of the larger ticket items in our class store. I dislike that it shows up in the “Needs Work” tab, but I don’t think it’s a problem overall. The parents know what is happening from the descriptors, and we just talk about it in class from the stance of making or spending money. It’s the easiest way to deduct some points without resetting the points entirely.

        Since transitioning to this modified system 7 weeks ago, my classroom economy has become more accurate and effective in a fraction of the instructional time. Class Dojo has replaced the clip chart that I used to use, and it helps with some of the accounting. I’m still using the bulk of the resources from my Classroom Economy Megapack, however.

        If you’re interested in trying out Class Dojo with the rest of my Classroom Economy Megapack, I’ll be offering the product on sale at half price through Tuesday. It is one of my best sellers, and if you’re looking to change up your classroom management routines or enhance your existing classroom economy, I don’t think you’ll be disappointed. I’ve also discounted the rest of my TpT store 20% to celebrate my return to blogging after a busy start to the school year. Those sale prices will go now through Tuesday, so check them out!

        Join the Mailing List! 

        Did you know that I have a mailing list so that you’ll never have to miss a post? Use the link at the top right of this page (under Never Miss a Post) to subscribe to my mailing list. You’ll get my posts delivered to your inbox, and you’ll also get access to some extra resources that I’ll be offering to my mailing list only. Given that my PhD work has really cut in to my blogging time this past year, the mailing list is the best way to make sure you see my new content. I promise not to spam you or share your contact information ever. 
        Have a great week!

        My Trip to Thailand

        When traveling east from Sri Lanka I generally travel through Thailand and transit in Bangkok. However I rarely get an opportunity to meet the people on the road as I am in a rush of checking in and out of hotels and flights. In April I was in Bangkok for a training assignment and had the opportunity to interact with people in Bangkok. I enjoyed the interaction with shop keepers and street vendors. However, I saw a significant difference in the pulse of the ordinary people. There was a more tense feeling with quite a high degree of uncertainty given the political situation in Thailand. Even though the current Prime Minister has promised to hold elections the majority of the Thais feel that the Army has started a war along the Cambodian boarder to postpone or effectively suspend the constitution again.

        The fight between the “old traditional Thai power base” and the “modern Thai power base” led by Thaksim. Some of the expatriates I met seem to think that Thailand is getting into a situation or a case of “Thailand having an Army that owns the country”; something similar to Pakistan. The Army seems to have a great say in the lives of the Thai people and the politicians.

        Thailand still remains a polite and friendly place to visit, however it seems to have shot itself in the foot regarding the tremendous progress it had made in the economic and democratic frontiers. As I come from a country that has seen decades of civil war I hope that sanity will prevail and the Thai people can sort out their differences and get ahead.

        WORKOUT ANYTIME in the Cincinnati Enquirer Community Press

        WORKOUT ANYTIME in the Cincinnati Enquirer Community Press in an article titled, “Mercy Health’s new hospital could be economic boon to township.” The article focuses on the opening of the Mercy Health – West Hospital in Green Township and how that is creating an opportunity for businesses in the community including the new Cincinnati WORKOUT ANYTIME. The article begins with details about the new hospital, then goes into the economic development going on in the area. The article then details some of the businesses opening in the area, including Tony Petrocelli’s Cincinnati WORKOUT ANYTIME. The article includes this information provided by No Limit Agency: “Cincinnati resident Tony Petrocelli is opening the first Workout Anytime in Ohio near the hospital, in a space that was previously a WesBanco and had been vacant for six years.” The article ends with info on other businesses and plans for development in the area.  Click here for the entire article or begin below.

        Mercy Health’s new hospital could be economic boon to township
        By: Kurt Backschneider

        GREEN TWP. — While township leaders are excited about the state-of-the-art medical services Mercy Health is bringing to the West Side, they’re also looking forward to economic development opportunities the new hospital will help attract.

        Mercy Health – West Hospital, a 250-bed, full-service hospital off of North Bend Road near Interstate 74, will open for business Sunday, Nov. 10. 

        Roughly five years in the making, the $240 million hospital will feature the latest advancements in patient care and comfort, new technologies, private patient rooms and expanded medical services for West Siders.

        (Read More)

        And More: Deals and Sales – Black Friday Weekend 2013 Deals Are On Now


        I don’t usually talk about current sales/promotions on this site [or haven’t so far], but after seeing all of the sales on out there, I had to make a quick post just to say that there are some great deals on now! 

        Even if you don’t live in the United States (for instance, I’m in Canada [eh]) you can still take advantage of them, as most electronics and entertainment companies are on the Black Friday/Cyber Monday weekend bandwagon, with tons of purchases available online – and it’s all “nuthin’ but good” for gamers… Steam, Origin, Gamefly and other digital gaming distribution platforms are all chock full of great sales, as is Amazon, TigerDirect, MemoryExpress and other local and online hardware stores, allowing you to finally get that Upgrade you’ve been wanting, should you decide to jump on a deal out there.

        Some examples of games on sale are below; but whether you buy a few games this weekend or save your money and just play with the new influx of players in your own favourite online game – I hope you enjoy your weekend and have some fun:

        An example of the Black Friday Weekend Sales for 2013 on Steam

        A small example of the Black Friday Weekend Sales for 2013 on Origin

        An example of the Black Friday Weekend Sales for 2013 on Gamefly

        See You In The Games!

        NYC INTERIOR DESIGN FIRMS STYLE

        NYC INTERIOR DESIGN FIRMS

        NYC Interior Design Firms Thomas Britt knows how to create a glamorous interior better than anyone, so when he promised to give “a sort of sense Adrian” an austere industrial building, he knew exactly what to do. Like Adrian, the legendary costume designer, knew glamorous is a quality difficult to achieve. To achieve this, Britt sought inspiration from its customers: a couple, both in the international financial world, and their adorable son.

        “My goal was to create a smart home NYC Interior Design Firms of the 21st century of a young international couple,” says Britt transform their building generic six-story ceiling in Tribeca in a family home. His plan, executed with Valentino associated Samsonadze was to create the illusion of architecture, where there was none, and stresses the unconventional combinations of colors, luxurious fabrics, mother of pearl and lacquered antiques and modern art (paired collect works of Indian and Pakistani artists, but also pieces of Americans, including Louise Nevelson and Sol LeWitt).

        Britt set a young voice in the lobby, the space on two floors, with steel stairs steep. “We needed to warm up to Hall and to make it more attractive,” says Britt, who has cleverly divided into individual zones (soft, floor to ceiling curtains dramatically tied back) in order to reduce its appearance. It has saturated the wall in red paint, then hang it on three “triumphantly scaled” diamond-glass mirrors your own design.

        You can also add a touch of light to the room. That no one can find a Louis XVI console painted lobby of a fossil old, put a couple of lamps ‘iceberg’ 1940 FRENCH plaster on it.

        A small back room in the rear portion of the first floor is equally joyous. Cozy the pupal stage, the room is dominated by a Diva like gold bed in an alcove and partially hidden by thick curtains turquoise. red pillows on the bed making it pop blue and gold. Small tables inlaid with mother of pearl to add an exotic touch. An Indian dhurries with blue, gold and red pulls together.

        As in many houses in the city, the main parts of the population are on the second floor. Britt treatment living room double height, is a huge expense. The palette is crisp set by the booty white curtains, 22 feet high huge red border. A high-level white towers of Murano glass chandelier in a white sofa, chairs and red carpet red and white barrel. “When you’re in this room, do not know what country you are,” said Britt NYC Interior Design Firms. “You can be anywhere. The decor is influenced by all the places I’ve been”.

        NYC INTERIOR DESIGN FIRMS
        NYC INTERIOR DESIGN FIRMS
        NYC INTERIOR DESIGN FIRMS

        First Impressions – Google Play App: “Screen Recorder” by Kimcy929 [App Mini-Review]

        This article has been initially posted as Text-Only at this time, to speed up publishing, focusing on a certain issue. I will return to this posting and add more data on Quality and Performance, Screenshots and then eventually Share it on Twitter/Google+/etc… Soon™

        [This past Christmas, my father gave me a neat little tablet to play on – Thanks, Dad! I have been enjoying the heck out of it, learning what it does (cough how to use a tablet cough), what applications it can run (I can write a Blog Post laying down!) and of course, what games I can play on it, heh. I hope to give some Tutorials/Walkthroughs and Reviews on Games and Apps from it sometime… Oh wait, here’s one now! haha]

        The Google Store page for the app, with the ‘Play’ button removed [I felt it was a bit distracting, making people think there might be a ‘video to play’ here at The Blog], replaced with The Blog’s ‘G’ brevity logo version.
        The Google Play logo in the upper-left will be used to denote images that come ‘directly’ from the Google Play website/page for the app for these types of App Reviews/Posts (Unedited other than logos or helpful arrows/etc added).

        Google Play App – Screen Recorder by Kimcy929

        Straight to it: while this app did in fact ‘record the screen’, it could not record the game sounds themselves (‘internal’ gameplay audio), it only recorded microphone sounds (‘external’ audio outside the device). While this is useful for some, especially Vloggers, I was personally looking for a screen recorder for my tablet that recorded gameplay and the audio from the game, for Tutorials, Walkthroughs, etc.**

        Also, an issue arose where ANY video I viewed after installing this app (even videos I had on my device BEFORE installing it) only came up as a black screen, with the message:

        “…Video Is Playing On External Display…”





        Now, I had not enabled any such option, nor did I connect any External Displays…

        I did some research online and found many people running into this issue with various apps and devices (tablets, phones, etc). Looking at the App configuration in the Settings of my tablet for Screen Recorder, I found this app giving itself the ability to ‘draw over other apps’ (which it can do to create on-screen writing, or arrows, which it advertises that it can do on the Google Play Store page for the app).

        This is fine and these features are no doubt useful; however, I could no longer view any videos with the built-in Video Player (“complete action using > Video”) – I literally could no longer view any videos I had on my device, at all. [Even with third-party Media Players, such as VLC Media Player, simply viewing any videos was now ‘broken’…]

        Video playing of the Video portion of Videos on the Video Player that
        plays Videos was like, really broken now

        Even after disabling this option that it gave itself without prior warning (found in Settings > Apps > ScreenRecorder > DrawOverOtherApps), all videos still came up with just a black screen and that message – that is, just Disabling the Setting did not ‘undo’ the inability to no longer watch videos in the Video Player. Disabling this setting, then Uninstalling this app, then Restarting the Tablet, fixed the issue [in my case, the only way it was fixed].

        While this app does record the screen, allows for microphone use, doesn’t seem to affect gameplay performance very much, and seems to have a decent selection of Resolutions and Bitrates (eg. 1280×720, 8000kbps), also having some additional helpful things like drawing arrows on the screen, etc; it does not record ‘built-in’ gameplay audio – which I personally was looking for** – and it gave itself a power which interfered with normal tablet video viewing afterward… Not only that, but it only recorded a few videos before no longer working, with a message just repeatedly showing up stating, “Unfortunately, Screen Recorder has stopped”.

        No changing of Settings (of my tablet or the app itself) was able to remedy this or get past it [the message coming up and no video being recorded]. Reinstalling the app made it work again, but after a few recordings, only that message repeating on the screen was the result, once again. Therefore, considering all of the above [but including the fact that the app must have worked for other people, that is, those not running into this ‘Screen Recorder has stopped’ message problem], this app earned Three Stars at Google Play from me, as of the time of this writing.

        Being ‘completely free’ (No Fee and No Ads), and having a nice selection of ‘standards’ like Resolution and Bitrate choices, and having ‘extras’ like being able to draw on the screen; perhaps with some improvements to bugfixing, enhancements to how it handles itself (asking/warning what would happen before utilizing the “Draw Over Other Apps” ability would be helpful to users that might run into a problem with it) and adding the ability to record internal gameplay audio**, Screen Recorder could potentially be a very capable and ‘feature-rich’ screen recording application.

        3/5 Stars
        ★★★☆☆


        This app (and a shortened version of the above Review by The Blog (to fit on Google Play’s Review area)) can be found on Google Play, at:

        Screen Recorder by Kimcy929
        https://play.google.com/store/apps/details?id=com.kimcy929.screenrecorder

        [Note: I am not affiliated with Screen Recorder or Kimcy929 in any way, and I have not and will not be compensated by them for writing about them here. I am merely a user of their application and like to help others with helpful information, when I can. The information in this post was obtained on an LG G Pad IV, and therefore might vary slightly from your own experience (Settings, Menus, Performance, Problems, etc) – but I hope that it was still found useful in some way.]

        ** More on this later… I have recently found out that Google has taken away the ability [temporarily?] to record game output AND game audio at the same time (“internal audio”) in the latest Android versions – save for a small number of possibilities on LG and Samsung devices. But, I’ll cover this at a later time, when I find out more solid details…

        Number Talks Chapter 1 – Thumbs Up for the Silent Thumb

        I’m linking up with my friend Misty over at Think, Wonder, & Teach for her summer book study of Number Talks: Helping Children Build Mental Math and Computation Strategies, Grades K-5

        Given that I’m wrapping up a K-5 Math Endorsement this month, this is a timely book for me. I love to teach math far more than I ever anticipated that I would when I entered this profession, and I really enjoy getting students to share and discuss their mathematical thinking. I’ve noticed, however, that many students lack strong mental math and computation strategies, relying instead on memorization to get them by. By the time they get to 4th grade, that’s not really a viable strategy anymore. They’re starting to work with much larger numbers, and they subsequently have more parts and steps to keep straight in their heads. If they don’t have great mental math strategies going, then it’s likely to become a mess pretty quickly. They can always solve problems on paper, but unless they have the good number sense that goes with doing mental math, they’ll never be able to gauge the reasonableness of their answers. In those regards, this book seems like a great idea.

        Chapter 1 really just introduces the concept of a number talk, and Misty does a great job summarizing it, so I won’t go into that here. One of my favorite teaching ideas from the book so far, however, was the idea of the “Silent Thumb.” When students are given a mental math problem, they need some “think time.” But every class has 2-3 students who are super math-letes who have the answer before the rest of the class has even processed what problem they’re being asked to solve, and those kids with their proud “I know! I’ve got it!” hand-waving typically end up dominating the conversation. The “silent thumb” solves that problem. All students hold their hand in a fist over their chest as they solve the problem. When they’ve got an answer, they move their hand from a fist to a “thumbs up.” They then think of another strategy to solve it while the other students are thinking, and for each additional strategy they come up with, they extend a finger. Awesome, right? I love how this gives all students some think time without creating pressure for some kids to hurry up because the fist is held close to the body — not waved in the air for everyone else to see. It also validates those super math-letes for their mathematical thinking by allowing them to communicate to the teacher that they have multiple strategies for solving the problem. And if they don’t have multiple strategies, then they have something to think about while the others are working.

        I’m definitely interested in learning more about Number Talks, and I’m excited to delve into this book a bit more. I’ll be posting more about this book in the weeks to come as I link up with Misty’s book study.

        If you don’t currently have a copy of Number Talks, you can still read the first chapter online. The book is a little bit pricier than most professional development books, but it comes with a DVD full of examples and it has a lot of resources packed in the text. If you’re looking to increase students’ mental math abilities, then this could be a great resource to use.

        Be sure to check out Misty’s Number Talks chapter 1 linky party where you can add some ideas of your own or read what other teacher bloggers are saying about the book. I promise you’ll find some great ideas there!

        And click here to see my review of Chapter 2!

        Have you ever done Number Talks in your classroom? I’d love to hear about your experiences in the comments section!

        Thanks for reading,

        My trip to Dhaka, Bangladesh, November & December 2010 & January 2011

        January 2011

        Back again at the Hotel De castle; it looks like I have spent more time here in the past 3 months than at home.

        The original brief was to develop a Sustainability Plan for the organization. However, most managers confuse it with Resource Mobilization / Fund Raising Plans. Typically a Sustainability Plan involves a risk analysis of the organization comprising of Board, Executive Leadership, Resource Audits (Man, Money, Material & Technology / knowledge), HR, ICT, Finance and other support services systems audits plus a host of other environmental issues.

        I cleared up this confusion and came to develop a Resource Mobilization Plan (Only Money); however, the team has not completed the budgets. So have to delay the process by a few days. Meanwhile I witnessed riots in Dhaka due to stock market crash yesterday. Stock price manipulation rings were very active in DSE over the past year and sent the stock prices way up beyond the wildest PE ratios possible for some companies. Just like what’s happening at the CSE in Sri Lanka. Most stocks trade much higher than PE ratio. Is this a prelude to what we can expect in the streets of Colombo I wonder?

        Finally managed to develop the RM Plan for the organization; this is the end of the assignment for me and look forward to going back to Colombo.

        December 2010

        It’s good to be back in Dhaka and at the Hotel De Castle. Guess what its Harthal season again! I was in Bangladesh in 2006 and in 2008 for the then famous Harthal “Save Democracy” which was a success in overthrowing the elected government and appointing a caretaker government. However, during Harthal the general public and the visitors to Bangladesh suffers by having severe restrictions in free movement. I will spend 2 weeks in Dhaka for this assignment with the intention of developing the Vision, Mission, Values and Strategies of the organization.

        It was hard work but managed to develop the Vision, Mission, Values and Strategies for the organization. During this process there was a one day Harthal, but it seems to have been a flop! What’s going on here, have the people finally realized not to go on Hartal for silly things? Well, we will just have to wait and see.

        As part of the assignment I had to help the management team present the Vision, Mission, Values and Strategies to the board and get their comments and final approval. However there is an issue. The issue is that; the roles and responsibilities of governance and the executive branches of the organization are not clearly delineated to ensure efficient operations. In short there is a power struggle between the two. I have to manage this delicate process; otherwise all hell may break loose during the meeting and true to form, the consultant will be the fall guy.

        You can read my article titled “Governance – Do we need to build capacity?” published in http://capacitydevelopment.ning.com/

        The meeting with the board went off without any major hiccups and got the necessary approvals and consent for the next stage of the assignment.

        November 2010

        The assignment I undertook was to develop a new Vision, Mission, Values, Strategies and a corresponding Resource Mobilization plan and support services (Finance HR & IT) plans for Acid Survivors Foundation ASF http://www.acidsurvivors.org/ of Bangladesh. I will be staying at the Hotel De castle in Banani, Dhaka.

        I must say that I was quite shocked at the number of people being attacked in Bangladesh and the physical and psychological damage it does to people. The major cause of attacks was economic (Dowry & Land). Given the poverty levels in Bangladesh I must say that I am not surprised. Having enough resources to go around for 160 + Million people is not a joke.

        The irony is that at the United Nations (Put UN Web Site) review of the Millennium Development Goals (Put MDG review results Web Site) it was concluded that mot poor countries (including Bangladesh) were failing miserably in trying to reach the MGD’s. In my Humble opinion this is because most poor countries are not dealing with the white elephant in the room i.e. population growth. This is obviously considered a sensitive subject given the reluctance of politicians to take on the religious establishments head on be it Islam or the many denominations of Christianity. On the contrary this should be the main subject of discussion by far thinking politicians the world over.

        For instance if Bangladesh were to implement strict policies to have ZERO growth in population for the next 10 years it would develop at a faster rate As even the slightest growth in the nations wealth will be held by a content population. This is common sense.

        Most people misunderstand when we talk about zero population growth. They think that you are suggesting that people stop having children. In fact it does not mean that at all. It just means that your birth rate has to be equated to your death rate.

        In the case of developing countries; the way that externally funded development sector project are implemented creates further frustrations within a given population and at times directly create political and social unrest. Most development sector professional (from the north countries as well as the south countries) don’t even understand this themselves. Consider the following. Most western donors advocate rights based projects. This means that all citizens will demand equal levels of services from the state irrespective of economic, social, political, ethnic or religious status. This in a developing country means that “now” 10,000 people line up for services as opposed to 1,000 people. The issue is that the rights based development project itself does not have any or enough funding to cater for the newly generated demand. The funds are only available to create and sustain the demand by the citizenry. So now the poor government has to serve a larger number of people with the same or slightly increased budget. This only means that in order to cater for the quantity the quality of services will be compromised. This is OK with the rich citizens as they can afford to pay for services by the private sector or bribe the state employees or use influence to get a better service from the state service provider.

        One can argue and say that this is a deliberate attempt by some of the donors to create instability within developing countries. I am not a conspiracy theorist but I wouldn’t put it past some of them. The point is that we who hail from the developing countries must act a lot smarter than we currently do if we want to develop.

        As for me the assignment will run in to the New Year and I will have to go to Bangladesh a few more times to finish the assignment.

        Essential fats

        If you have been doggedly avoiding fat in an attempt to lose weight — this approach is WRONG. You need fats in your diet. Your brain consists mostly of fat, and your intelligence, heartbeat and muscular movements all depend on it. The only way in which your body can send electrical messages through living tissue is via your nerve cells and their connectors, which again are made of fat.

        The fact is that some fats (known as lipids) are essential. They act as the second energy reserve behind glycogen, providing most of their energy at around 70 per cent of maximum heart rate. Endurance athletes utilize fat as an energy source more than other sports people and this is why they tend to be lean.

        Fats are not just for energy, though. Their many other functions include insulating important organs, carrying fat-soluble vitamins and regulating hormone levels. If you’re a female athlete and you experience a loss of your periods, this may be due to extremely low body fat, for this plays a vital role in the activation of the female hormone oestrogen.

        Fats also contribute to health in many other ways — provided they are of the right kind. In an attempt to warn people about the risk of consuming toomuch fat, certain groups have created the impression that all fats are bad, but this simply is not true.

        Diet Start

        Are you eating the wrong fats?

        Many people in the Western world are getting 45 per cent of their calorific intake from fats, but these are junk fats that the body cannot use, so these people are just as fat-deficient as those on extremely low-fat regimes.

        THERE ARE TWO MAIN TYPES OF NATURAL FATS:

        1. Saturated fats come primarily from animal sources such as meat and dairy products, and from coconut and palm-kernel oil; they are solid at room temperature. They provide the body with a stored form of energy in fat cells.

        2. Unsaturated fats are found in vegetables, nuts, grains and seeds, and in fish and game; they are liquid at room temperature. They contain two fatty acids that are essential to life and, more importantly, that the body cannot produce itself. These are linoleic acid (omega-6) and linolenic acid (omega-3) From these two ‘essential fatty acids‘ your body can make all the other fatty acids it needs.

        Is it just a case of cutting out saturated fat?

        Saturated fat gets a bad press, and a diet too heavy in it has been closely linked to cardiovascular disease. However, there is another fat with an equal capacity to harm: hydrogenated fat.

        Hydrogenated fat is solid or semi-solid at room temperature (the best example being margarine). It is created when a liquid oil (such as corn oil) has hydrogen added to it, changing its chemical structure. This in turn can interfere with the metabolism of some essential fatty acids. Research has shown that the trans fats in hydrogenated fats can increase LDL (poor) cholesterol,decrease HDL (good) cholesterol and thus raise the risk of coronary heart disease. Hydrogenated fat is found in almost all processed foods, plus frozen convenience foods and deep-fried fast food. This is another good reason to say goodbye to junk food and hello to fresh produce.

        If you usually ingest high amounts of processed fats and use commercially altered oils for cooking, then you are certainly not getting the balance of fats that your body needs.

        Why don’t food manufacturers use healthier oils?

        Even though the food industry uses vegetable oils that contain a reasonable amount of omega-6 fatty acids, they avoid omega-3s because these are more susceptible to oxidization — in other words, they go rancid quickly and don’t have a long shelf life.

        Ironic, isn’t it? Food manufacturers quite happily promote food under the guise of lowering cholesterol and reducing heart disease, but they are ignoring one of the fats essential to health. So unless you are eating high amounts of fish, fish oils, leafy vegetables, nuts, unrefined olive oil, tofu or flaxseed oil, your ratio of omega-6 to omega-3 fats is probably screwed up, and this in turn will be screwing up your health.

        The current Western diet is much higher in omega-6 fatty acids than omega-3’s. Remember those healthy Palaeolithic people we were discussing earlier? They were eating equal amounts of both.

        How is this relevant to body weight?

        If you are eating a diet with a good balance of omega-6 and omega-3 fatty acids, this will affect your body in beneficial fat-burning ways:

        • Your metabolic rate will be increased, as will the metabolism of fats, so more stored fat will be burned for energy
        • Your cells’ sensitivity to insulin will be increased, so that it regulates blood- sugar levels more effectively
        • The ratio of insulin to glucagons will improve, which will unlock the fat- storage banks and again allow fat to be burned as energy
        • Natural appetite suppressants will kick in.

        So if you want to improve your chances of losing weight, you need to up your intake of omega-3 and other healthy fats.

        Essential fats Q&A

        Q. How often should I eat oily fish per week if I want to consume enough omega-3 fatty acids?

        A. You should aim to eat oily fish a minimum of 2-3 times per week, or ensure you use flaxseed oil regularly on salads to raise your levels. Try to eat fish from as safe a source as possible as many coldwater fish are contaminated with heavy metals and pesticides.

        Q. How can I avoid hydrogenated fat?

        A. Cut out processed food and only use cold-pressed un-refined oils such as olive oil, or coconut oil for cooking. Don’t eat fast food that has been deep-fried and avoid butter type spreads. If you did this, then you should be able to avoid consuming dangerous trans fatty acids.

        Guild Wars 2: How To Ride “The Train” of Queensdale (Champion ‘Farming’ Runs As A Group) Tutorial with Map

        [NOTE*** As of April 15th, 2014 the changes to the game with the April 2014 Feature Pack update have altered The Train route somewhat – these changes will be updated in this map and article as they solidify into a commonly-agreed Route…
        FURTHER UPDATES AT THE BOTTOM OF THIS ARICLE]

        Ah, Guild Wars 2… I’m having so much fun with you, I can barely stop to start typing helpful Tips for others to read! Why are you so awesome? Oh, that’s right, your creators and other ArenaNet buddies heard the nighttime wails of MMORPG players from other games around the globe and listened intently to our cries, wanting to soothe us softly by satisfying requests we players have made of all of those other games, didn’t you? Oh, yes you did.  The result: a game I wish I had gotten into a lot sooner… Thank you, ArenaNet.


        For those new to the game (or those who haven’t done this before), in the beginning area of the Human lands of Kryta, there is a phenomenon called “The Train”. After asking a few questions in-game and watching it a while, and then joining in on it off and on, on my own, I feel I can now safely share a simplified Tutorial on ‘The Train’ and explain to others (mainly newcomers to Guild Wars 2) what it is and how to be a part of it, if you wish to be.

        Loading Screen for the Queensdale region, where ‘runs’ of The Train take place
        (Click to see Full Size)

        What is The Train?

        ‘The Train’ in Queensdale is, essentially, a cooperation of players moving and killing together as a group [in an MMO game?Whoknew?lol]. The Train targets a small number of Champion-type mobs [MOBile monsters], killing these same ones in a repeating cycle, again and again. The pattern [the “Route that The Train takes”] has evolved over time and differs little, no matter what server/shard you are on. Traveling and moving in collaboration with each other gives the result of faster kills, experience and loot for all those taking part (and sometimes the groups can get quite large). In Guild Wars 2, one does not need to ‘Party’ or form an ‘official’ group of any kind, in order to benefit from conquering enemies together [even when not following The Train]. Merely join alongside and help out a bit, and you too are now part of the Clique of Killing and can reap the rewards.

        Even though The Train runs in the first leveling/adventuring area of the Humans (called Kryta), you can play any Race you wish, and then run/travel to the Human lands and be a part of The Train. There are no restrictions on Race interaction (no ‘sides’; no factions, no clans, no tribes [to restrict players]) in Guild Wars 2. Any race can be created and interact with any of the other Races in Guild Wars 2. So, be whatever race you want to be, you can still head to Queensdale and get on The Train!

        When ‘on The Train’ (following the group around and helping to kill the Champion monsters), you do have to be a high enough level to ‘hit’ the enemies in order to register as a ‘contributor of the group’ and benefit from the encounter (get experience, be able to loot, etc). With the Champion mobs being ‘farmed’ [by The Train] averaging Level 10 in this region (these are the only mobs that The Train goes after, remember), you may not be able to actually hit them until your character is about Level 7 or 8; so if you are playing a brand new character, do some starting Quests, World Events or your character’s Storyline for a bit first.

        Killing the Boar champion while on the Train in Queensdale
        (Click to see Full Size)

        If you are a ‘Brand New’ Player to Guild Wars 2, I strongly suggest doing that for the most part anyway (Quests and Storylines), as doing so, you will more easily learn how to control your character, fight battles, use your skills as you learn them, and learn to navigate the territories and develop your character as a whole.
        The Train is, for the most part, a repeated cycle of killing [almost absolutely nothing but] a small number of Champion ‘boss’ style monsters (as in 5-6 of them, depending on the route The Train takes on your Server/Shard, remember it differs little) – and there have already been arguments all over forums and other websites as to whether relatively New Players should take part in it at all (and if it harms the gameplay/environment of newer players). I believe that this decision is up to each individual, as some people might eschew the practice completely until Level 80 (the current maximum level as of the time of this post), while other people will love the camaraderie and easy access to loot (you always get items comparative to your current level, whatever that may be, when the Champions die).
        As with any game, there will always be people that will say a certain activity is too repetitive and boring, and there will always be people that will say it is a good source of ‘loot’, and there will always be people that will advise doing something else (like playing PvP or more PvE). I like to suggest, if people ask, that each person try Taking A Ride On The Train for themselves at least a few times, then judge whether they wish to continue doing it or move on to other things, leaving the choice up to each player.

        [On a personal note for a moment, merely to address this matter that many people seem to argue about and state my own personal opinion, I myself enjoy roaming the lands of GW2 randomly, helping out NPCs and doing the little events found around the world. I play usually always play solo and that affords me the ability to change it up and do whatever activity I want, stop whenever I want (or if I get too tired physically and have to stop, due to my illness) and roam around taking [way too many] screenshots of the environs, gathering resources as I leisurely explore and discover the countryside. I often forget about the Storyline for my character – there is so much to do in the world; but I try to get in on it as I remember to and develop my character along with the story that is tailored for each Race. I do take a ride on The Train, but only as a ‘something else to do for a change’, not as my ‘main leveling mechanic’ or my ‘main source for items’. I like to think this off-and-on approach allows me to enjoy The Train while not getting too bored of it too quickly, all the while being able to enjoy the game at the same time, and it is just ‘another thing that I can do’ in the huge game world of Guild Wars 2.]

        Killing the Troll champion while on the Train in Queensdale
        (Click to see Full Size)

        How does one ‘get on’ The Train? 

        First, I always suggest to others, to get the Waypoints that The Train uses first. This will allow you to quickly relocate and follow The Train, travelling to the next Champion that is to be killed. If you did not create a Human, travel to The Human Lands and simply run to the Waypoints to open them up on your map and register them so that they can then allow you to return to them/use them in the future and for Riding The Train.

        Don’t worry, there are only three main waypoints used in The Train’s generally-used rotation (and it differs only slightly on some servers/shards [for instance, on Eredon Terrace, “The Bandit” is very rarely killed by The Train – which seems to be the main difference for The Route from other shards – however, since I have created my character on ET, this is the example I will use]). The waypoints used and the route generally taken are all shown in this graphic I have created of the map of Queensdale below.

        The Game Tips And More Blog’s Map of Queensdale and The Train Route as of April 2014 [Old Version]
        (Click to see Full Size)

        The Route that The Train takes usually runs like this (repeatedly):

        • Begin the Route from the upper right [the Double Orange Arrows on the map I created, above]
        • Kill the Boar champion in the hills there, NW of the Hunting Lodge
        • Fast Travel to the Vale Waypont and head into the caves just to the west
        • Kill the Troll champion inside the caves of Altar’s Windings
        • Fast Travel to the Phinney Waypoint and head NW to a glade at the edge of the trees
        • Kill the Rotting Ancient Oakheart champion at the forest’s edge
        • Fast Travel to the Krytan Waypoint and head NE, towards two large hills
        • Kill the Forest Spider champion on the larger hill, SE of the Hunting Lodge in a grove of trees
        • Run NW past the Hunting Lodge and up into the hills and wait for the Boar event again
        A couple notes about the map: I made ‘tick marks’ (they look like little orange hyphens/dashes) that remind you of the order the champions are killed in and which Waypoint to take [-, –, —, etc]. I managed to capture and keep the ‘white dotted-line of travel’, running around following The Train, so if you are a bit lost, try to re-create the white dotted path that you see on my map. To help with finding the Forest Spider champion on a hill SE of the Hunting Lodge (and NE from the Krytan Waypoint), I put a small orange “S” where it is normally encountered. Lastly, my server/shard does not kill The Bandit Lieutenant champion [and we may be the only shard that doesn’t apparently], but if you wish to find him, he is in the Bandithaunt Caverns, N of the Vale Waypont.

        The champion Boar shows up only after someone talks to Lodgemaster Carthage at the Hunting Lodge. There is a short event waiting period, then two hunters come out and slowly stalk their prey. Everyone usually waits in the hills to the NW of the Lodge and this can be a good time to go through your inventory, unpacking any goodies, salvaging, organizing, etc. There may even be some Banners nearby that can give beneficial Boons [“Buffs”], usually placed by some friendly Guild Member. Take a short break, get a drink – and get ready to jump back on The Train!

        When you sit down and start to play a new gaming session, or if you have lost track of where to go next, you can always ask in Chat (/map) where The Train is at that moment, to know where to ‘get on’ (to join in). Most people simply type, “Train?” or ask “Where is the train now?”, and usually some kind soul will answer and state what stop The Train is at (what champion they are killing), or where they are heading to, at that moment. Common answers are, “Boar” or “Spider is up” or “waiting on Troll” or “at Oak”, for the various champions (it may differ slightly on your server, but not by much). Sometimes, a helpful person will suggest, “Head to __some champion__”, which means that the one they are currently fighting is almost dead, so you ‘might as well head to the next one’.

        Killing the Oak champion while on the Train in Queensdale
        (Click to see Full Size)

        A few things to keep in mind as you ride The Train are: you have to be able to hit the mob in order to be able to loot it at all, therefore you may have trouble if you are much lower than level 7 or so (the mobs are Level 10). Loot will drop that is around your character’s level, no matter what it is, so you can usually use it right away or soon. The Boar portion of the Route takes a little bit to get started and sometimes people will say phrases like, “Boar is Walking” or “Hunters are Walking” or “Boar Starting” and so on, to let everyone know, who were most likely just standing around waiting or AFK, that the event is beginning. You can gather Resources that are around (mine veins, gather plants/food, cut down trees) or that you pass by, on your way to the champions, just don’t fall too far behind if the group is large – they can start to kill these Champions pretty darn fast – and you might miss out on the Loot Drop entirely!

        Killing the Spider champion while on the Train in Queensdale
        (Click to see Full Size)
        That’s it! Try not to bore yourself with repeating this excessively, by the way. Have fun, enjoy the loot and camaraderie of fellow GW2 players; but if it starts to become boring, go back to your character’s story, pop in for some PvP or even do some Gathering, enjoying the landscape and beauty that is Guild Wars 2.

        [UPDATE 1*** As of April 23rd, 2014 there seems to still be a lot of confusion as to the accepted/overall Route that The Train should take. There have been many arguments over what order the train will travel in and opposing groups will perform the run in awkward manner to each other. As a result, ‘finalized’ changes to this map and article will be delayed, until the community can solidify a pattern/route for The Train.
        For now, “the basics” of what the Train is and does are secure and remain the same as this article. The Train may still run on your server/shard in the same manner, in general. Enjoy these aspects of this post, for now]
        [UPDATE 2*** As of May 3rd, 2014 although there is still a bit of debating as to what should be a ‘standard route’ for The Train to take, a general consensus seems to be forming and this map and article will be redone and/or updated Soon™]
        [UPDATE 3*** As of June 2014, although there is still some debate that occurs (mainly because someone gets to Oak ‘early’ and kills it on the group), most of the consensus appears to be this route: 
        Boar-Troll-Bandit-Oak
        I am working on a new, updated version of the map and will insert it here when finished.
        For now, the rest of the information of this post (how to follow the train, etc.) is still valid and hopefully found helpful, for those who are interested in knowing what The Train Of Queensdale is and how to do it]

        See You In The Game!

        It’s Not Just You ™ – Heroes Of The Storm ‘Screen Shake’ = ‘Motion Sickness’ (Dizzy, Nausea, Headache) [Notification]

        Just a quick post to let others know that – if you are experiencing this phenomenon – getting dizzy or even nauseous while playing Heroes Of The Storm lately: It’s Not Just You™… I even whipped up an Example of the effect, for those that aren’t quite noticing it:

        Example of ‘the screen shake effect’ I made, in GIF format
        (Click to see slightly larger Full Size)

        I first came across this in the Official Heroes Of The Storm Forums at Battle.Net. It was originally posted by “Phoenix” a couple of weeks ago, here. Although I have seen it personally in-game (noticed it), I have not suffered the nauseating effects that many may/do suffer with this Special Effect the game offers – even though I have experienced ‘game motion sickness’ from other games. [I did notice when testing and creating the above Example, that it made me slightly queasy however..]. Mainly, I have ‘been lucky’ with not experiencing it because I do not normally play the Heroes that have/produce this effect (the ‘screen shake’ effect). Here is a list of all the Heroes and Spells that can produce this effect, thanks to a helpful post by “Hatsoz” on the Official Forums:


        Spells with Screen Shake
        Zagara – Nydus Network (R)
        Genji – Swift Strike (E)
        Sgt. Hammer – Concussive Blast (W), Blunt Force Gun (R), Napalm Strike (R)
        Gazlowe – Deth Lazor (W)
        Lucio – Soundwave (Q), Sound Barrier (R)
        Valeera – Blade Flurry (W)
        Zul’jin – Twin Cleave (W), Guillotine (R)
        Ragnaros – Sulfuras Smash (R)
        Alarak – Lightning Surge (E)
        Cho – Upheaval (R)
        Karazhim – Radiant Dash (Q) (Only with Volley of Blows Talent Lv. 16), Seven-Sided Strike (R)
        Anub’arak – Burrow Charge (E) (Upon resurface)
        Li Li – Water Dragon (R)
        Diablo – Shadow Charge (Q), Fire Stomp (W), Overpower (E)
        E.T.C. – Face Melt (W), Stage Dive (R) (Landing only)
        Falstad – Hinterland Blast (R)
        Kerrigan – Impaling Blades (W)
        Muradin – Thunder Clap (W), Dwarf Toss (E), Haymaker (R)
        Sonya – Ancient Spear (Q) (On Hit), Leap (R)
        Stitches – Slam (W)
        Tyrael – El’druin’s Might (Q) (On sword landing), Angelic Flash (Q) (Teleport to sword), Judgment (R)
        Uther – Hammer of Justic (E), Divine Storm (R)





        Heroes with No Screen Shake
        Valla
        Tyrande
        Lunara
        Kael’thas
        Zeratul
        Cassia
        Probius
        Varian
        Samuro
        Zarya
        Auriel
        Gul’dan
        Medivh
        Chromie
        Tracer
        Dehaka
        Xul
        Li-Ming
        Greymane
        Gall
        Artanis
        Lt. Morales
        Rexxar
        Leoric
        The Butcher
        Johanna
        Sylvanas
        The Lost Vikings
        Thrall
        Jaina
        Azmodan
        Chen
        Rehgar
        Murky
        Brightwing
        Tychus
        Abathur
        Arthas
        Illidan
        Malfurion
        Nazeebo
        Nova
        Raynor
        Tassadar

        I experimented with every single Graphic Setting available in the game (eventually running it on the Lowest Possible Settings) and could not find a Setting that disabled this effect…. I first tried Physics, then other effects-affecting settings, such as Shader level, and more, until everything was at the lowest possible Settings and still the effect appears in-game.

        I even looked through the game directories (folders) for some sort of editable configuration file, but the only ones present were ‘protected’ by Blizzard, by being compressed or encrypted in their own proprietary encapsulation of some sort (which renders the files not easily readable or editable by normal means – this is understandable, as they do not want their game easily ‘hacked’ or negatively affected by end users).

        So, for now – unfortunately – there is no solution for this, for sufferers of this effect. The only recourse, until Blizzard puts in an option to Disable Screen Shake, is to avoid the Heroes that produce this visual effect.



        Just letting Sufferers know: It’s Not Just You™!
        [I will try to remember to return to this Post and Update it once Blizzard adds this option – or a workaround is found]

        Multi-Protocol Label Switching (MPLS) continue…

        Adding a Label

        MPLS is a method that takes the best of both worlds and creates a concept that allows IP packets to travel through the network as if IP were a connection-oriented protocol (which it isn’t). Using special routers called Label Switching Routers (LSRs) does this. These routers connect a traditional IP network to an MPLS network. A packet enters the MPLS network through an ingress LSR, which attaches a label to the packet, and exits the MPLS switched network through an egress LSR. The ingress LSR is the router that performs the necessary processing to determine the path a packet will need to take through the switched network. This can be done using traditional routing protocols such as OSPF. The path is identified by the label that the ingress router attaches to the packet. As you can see, the ingress router must perform the traditional role that a router fills. It must perform a lookup in the routing table and decide to which network the packet needs to be sent for eventual delivery to the host computer.

        Internet 2010

        However, as the packet passes through the switched network, it is only necessary for the switch to take a quick look at the label to make a decision on which port to output the packet. A table called the Label Information Base (LIB) is used in a manner similar to a routing table to determine the correct port based on the packet’s label information. The switch doesn’t perform IP header processing, looking at the IP address, the TTL value, and so on. It just spends a small amount of time doing a lookup of the label in the table and outputting the packet on the correct port.

        When the packet reaches the egress LSR, the label is removed by the router, and then the IP packet is processed in the normal manner by traditional routers on the destination network.

        If this sounds like a simple concept, that’s because it is. MPLS still is in the development stages, so you’ll find that different vendors implement it in different ways. Several Internet draft documents attempt to create a standard for MPLS. Other features, such as Quality of Service (QoS) and traffic management techniques, are being developed to make MPLS a long-term solution.

        Using Frame Relay and ATM with MPLS

        One of the best features about the current design of MPLS is that it separates the label-switching concept from the underlying technology. That is, you don’t have to build special switches that are meant for just MPLS networks. MPLS doesn’t care what the underlying transport is. It is concerned only with setting up a path and reducing the amount of processing a packet takes as it travels through the circuit.

        Because of this, it’s a simple matter for an ATM or Frame Relay switch vendor to reprogram or upgrade its product line to use MPLS. For ATM switches, the VPI (virtual path identifier) and VCI (virtual channel identifier) fields in the ATM cell are used for the Label field. In Frame Relay switches, an extra field is added to the IP header to store the label. However, don’t get confused and think that an MPLS network is an ATM network or a Frame Relay network. These switches must be reprogrammed to understand the label concept. It’s even possible, for example, for an ATM switch to switch both ATM and MPLS traffic at the same time. By allowing for the continued use of existing equipment (and

        these switches are not inexpensive items), large ISPs or network providers can leverage their current investment, while preparing to install newer MPLS equipment when the standards evolve to a stage that makes it a good investment.

        For the long term it’s most likely that MPLS will be implemented using technology similar to Frame Relay instead of ATM. This is because of the small cell size of the ATM cell (53 bytes) combined with a high overhead (the 5-byte cell header). In a small network with little traffic, this 5-byte cell header seems insignificant. However, when you scale this to large bandwidth network pipes, this amount of overhead consumes a large amount of bandwidth given the small amount of data carried in the 53- byte cell. Thus, variable-length frames are most likely to become the basis for MPLS networks in the next few years.

        My trip to Dhaka, Bangladesh

        It was quite an intense process to pin down the existing system. It existed in bits and pieces in various places of the organization managed by different people in the structure. It was quite unique to find an organization with a finance management system spanning from resource mobilization (Income generation, contracting and applying for donor funding) to implementing through 3rd parties (implementation through contractors as well as other civil society organizations) but not to have it documented any ware. It was a tough job to get agreement on the current practices as well, as each individual seems to have tweaked it to suite his/her requirement. Finally we documented the entire system as the minimum agreed common current practices.

        This is typical of an organization which has grown organically and reached a point that does not allow it to grow any further without structure and form in its organization structure and systems. As a result of this the assignment has ballooned into a much bigger assignment as the organization needs basic guidance regarding system development and management. I was also able to analyze the system and suggest some key improvements (fundamental stuff really) to instill the use and management of the system. The client has now requested that I support them in the preparation for implementation which needs a lot of pre planning and documentation in the form of developing policies, manuals, forms, job descriptions, task calculation etc. It also means that we have to design the administrative and functional structure so that the organization can manage a decentralized finance function spanning the entire spectrum of financial management.

        I left Dhaka on Friday and headed back to Colombo. The flight from Dhaka to Bangkok on TG was fine and operated on time. I had a 5 hour stay in Bangkok before I took the flight to Colombo. I must say that I don’t find the new airport at Bangkok as passenger friendly as the earlier one. The new one however is big and posh but it has lost some of its coziness in my opinion. As usual the Colombo flight was delayed for over a half an hour and once in Colombo had to endure the long queues at the emigration counter.

        I am back in Colombo and back at work to finish another assignment (OCA) I took concurrently and had a junior consultant do some parts of it. I have to send its draft report by the end of business 6th April. My next assignment is going to be in the Philippines and looking forward to it as it will be my first assignment in the Philippines.

        My Trip to Bangladesh June 2011. Cont…..

        The assignment is now over; managed to progress the milestones without much trouble given that I lost a total of 4 days to strikes. The draft evaluation report was well accepted by the client; now comes the tricky part getting comments on the report. There are basically 2 types of comments that a consultant is likely to get on a report. The first being, comments regarding the structure / formatting and style of the report and some times regarding the language. We have all had different educations and are used to a particular vocabulary; further at some point in our lives we have written a report and we generally stick to that structure while accommodating subject related topics. My rule of thumb is that I give in to these requests as it is just not worth the discussion regarding it. I prefer to use that time for some thing else. The second being, comments regarding the contents such as findings, recommendations etc. Here I generally play hard ball, unless I am presented with an argument backed by facts / proof. This goes to the hart of your position as an independent, unbiased professional consultant. I look forward to these comments as they challenge your thinking and help you to be a better consultant as well. I am supposed to get all the comments by next Friday as the end of the assignment / submission of the final report scheduled after 2 days of receiving all the comments.
        During my last week in Dhaka my health deteriorated (food poisoning). My fault for eating some pastries (short eats) offered to me during a meeting. Momentary laps of concentration. . I have been coming to Bangladesh since 2006 and this is the first time this happened to me. My dread was the journey back to Colombo which I made with the aid of Imodium. I know this drug is banned in some countries but it is a life saver when traveling.
        I do not have any other assignments lined up at this moment. Now that I am back in Colombo I need to tie up some outstanding issues. These are in fact 3 reports, 1) finalizing the report for the current Bangladesh Assignment, 2) finalize the Strategic Plan for my client in Batticaloa and 3) Submit a reflection I did for myself for the institute of consulting.

        Reminder: Diablo II – 2014 Ladder Reset is May 27th

        That’s right, this is just a quick reminder that tomorrow is the Diablo 2 Ladder Reset for 2014!
        So get ready – stock up on energy drink and tell your friends you won’t see them much for the next while – and get on that Ladder! Have fun playing, my wonderful readers – and enjoy being on the Top Of The Heap
        (at least until the botters get going)
        See You In The Games!

        The Incredible Pistol Squat

        The pistol squat requires mobility and strength from the entire lower body and core, and once you work up to being able to complete them you can get a great lower body workout anywhere with no equipment. 
        Most people will not be able to perform the pistol squat properly without working through several progressions that help develop the specific mobility, strength and stability required to get through the exercise for repetitions.
        Pistol Squat Progressions
        There are two basic ways to progress to a full pistol squat. Either use a progressively lower bench or step, or use something to hold onto while doing a full pistol to help pull yourself up and progressively use it less and less until it is no longer required.
        For the step progression, you can use actually stairs or use a chair to start.    Stand facing away from the chair or staircase and put all your weight on one leg keeping the other leg straight with the hip flexed slightly so the non-standing foot is held off the ground in front of you.     Flex the hips and reach back with your butt towards the staircase or chair and lower yourself down under control keep your arms straight and in front of you parallel to the floor to counterbalance your hips moving backwards.    Let the standing knee and ankle flex along with your hip as you reach your butt backwards and go down.    However, you MUST keep the heel of the standing leg down and this requires a lot of flexibility of the soleus tendon (soleus is the single joint calf muscle).    
        Try to lightly touch your butt down to a stair or the chair then drive the standing foot down, squeeze the glute extending your hip, knee and ankle to the starting position.  Perform sets of 5 – 10 reps each leg.    Overtime find progressively lower steps, benches or individual stairs so that you are progressively squatting lower and lower until you can perform a full squat on one leg all the way down to the ground and back up again keeping your non-standing leg straight and parallel to the floor while the hip is flexed.
        The second option to progress to full pistol squats is to hold onto something that you can pull on while doing a full pistol squat thereby assisting the stance leg.    You can hold onto a suspension trainer, a cable machine handle, door frame, chair or table, or resistance training band or rope anchored above you.    A great way to do this is to anchor a suspension trainer or resistance band above you to a secure point then grasp the two handles and pull on them as required to do a full pistol squat.    Over time progressively use less and less assistance from the upper body, switch to just one hand, then lessen grip and assistance until you can perform full pistol squats.

        Videos:  https://youtu.be/It3yvU0fomI or https://www.youtube.com/watch?v=PPksQCbeVZw

        Trip to Hyderabad Cont……

        Today I am leaving to Hyderabad for the assignment. Funny, there seems to be a lot of things that we do when doing an overseas consulting assignment but don’t really talk about it. The stuff we do for preparation has two parts

        Things considered as part of consulting process
        Marketing, prospecting and selling
        Proposal, budget & contract
        Invoicing and receiving advance payment
        Preparation / Intake

        Things that are part of the consulting process but gets taken for granted
        Requesting Invitation Letter to process visa
        Applying for visa
        Travel & Medical Insurance
        Foreign Exchange
        Transport to and from Airport – in your country and the country you are visiting
        Travel advice regarding security, weather etc

        I addition it is up to the consultant to find out about interesting things in the city s/he visits. In my experience some assignments will give you a bit of time in the evenings and it can be boring to be stuck in a hotel all the time. Suggest the web or lonely planet for this.

        Also rule of thumb is exchange a bit of money at the airport itself. Trust me you will spend more time and money in trying to look for better exchange rates.

        The trip to Hyderabad India

        I am starting my next assignment on the 3rd of October 2009 in Hyderabad India. This will be my 4th trip to India in the last 2 years. Going to india is a funny thing for me as I cant wait to get there. Once I am there I get the feeling that I need to get back home (Sri Lanka) soon.

        I have applied for my visa nd waiting to collect it. will do it tomorrow.

        Workout Anytime in North Fulton Newspapers

        Workout Anytime in North Fulton Newspapers in an article titled, “New Workout Anytime coming to Milton.” The article begins with information about the new Workout Anytime opening in Milton and the owners. The article then goes into details about what you can expect at aWorkout Anytime, with a quote from Randy Trotter. General Manager Chris Maier is quoted about why he believes in the Workout Anytime model and Lynn Jackson is quoted about why they’re happy to open in the area. The article closes out with info on how to join and about the expansion plans for Workout Anytime.  Click here for the entire article or begin below.

        New Workout Anytime coming to Milton
        By: Caitlin Wagenseil
        MILTON, Ga. — When two members of a gym found out their beloved workout place was going to close down, they decided to take action. 

        Paul and Lynn Jackson, previous members, bought the Workout Anytime in Cumming. Now, they are gearing up to open their second location in Milton with Randy and Heather Clevenger.


        (Read More)

        April Nitzsche on WBIR Knoxville

        April Nitzsche was recently on WBIR as part of their Workout Wednesday. In the segment April demonstrated some exercises you can do at home and in the gym with kettle bells for a good workout. She also mentioned the new Maryville opening location as well as the Bearden location.

        You can also view the video here.

        Workout Anytime in Louisville Business First Inbox

        Workout Anytime in Louisville Business First

        Workout Anytime of Louisville, KY was recently in Louisville Business First. The article features Louisville resident, Bobby Paisley. Paisley brought Workout Anytime to the Louisville market, and has been with the brand for four years now. Bobby has been able to successful build the brand and will be opening his third Louisville location this March. Along with fellow fraternity brother from WKU and Regional Developer Greg Parker, they have built the brand in Louisville and surrounding areas in Kentucky.
        You can read the full article here. 

        Foam Rolling aka Self Myo-Fascial Release

        Using a tubular foam roller to literally roll over tight areas of muscles and tendons is known as “Myo-Fascial Release”.    While it seems counter-intuitive applying steady pressure to muscles and tendons with an emphasis on trigger points (areas of tightness and soreness) has been proven to be a highly effective method for improving mobility.    
        Since you are in complete control of the amount of pressure applied and how long it is applied you can customize the experience based on your level of sensitivity.   Key areas to focus on include the hamstrings, calves, gluteal muscles, latissimus dorsi muscle, and even low back and hip flexors if done with caution.
        You can use a tubular foam roller, and they are made in varying levels of firmness from soft to very firm.   In addition, there are variations that include a textured surface of varying levels from small to large finger like projections.  You can also use balls such as a lacrosse ball, baseball, or tennis ball in a similar fashion.     NOTE:  the smaller and firmer the object the more pressure it will tend to apply so proceed cautiously.
        The technique is to position the foam roller on the floor (on a firm but not hard surface is best).  Then position the muscle/s you are targeting on top of the foam roller.     For example, for the calf sit on the floor with your target leg extended so that it is on top of the foam roller with the lowest portion of the calf on top of the roller.    
        Use your hands to lift your butt slightly off the floor to allow you to apply pressure down onto the foam roller.    Then literally roll forward slowly over the foam roller paying attention to any trigger points where you notice sensitivity or tightness.   
        When you find a sensitive area slowly roll back and forth on the spot until you feel it release.   With a little experimentation you will learn how much pressure and speed work best for your physiology. 
        Self Myo-Fascial Release/Foam Rolling is a great way to start a workout and does a great job of safely improving mobility before a workout and is also great to do between workouts.
        Contraindications to Foam Rolling
        Pregnancy – during pregnancy ligaments become lax and pressure anywhere on or near the abdomen is to be avoided at all costs so best to skip foam rolling when pregnant.
        Osteoporosis – soft bones and additional pressure are not a good combination so best to avoid foam rolling without a physician’s permission if you have moderate to severe osteoporosis.
        Intervertebral Disc Issues – anyone with disc problems in their spine should be cautious with foam rolling because pressure in the wrong areas can create problems so again get guidance from a medical professional if you have an disc issues in your spine.
        Inability to support bodyweight on arms or legs – foam rolling cannot be done safely if a person lacks the strength to support their bodyweight on their arms and/or legs.
        For a pictorial guide of various foam rolling exercises to target specific body parts click here:   https://www.pinterest.com/explore/foam-rolling/  

        How to Optimize the Benefits of Vitamin D Supplementation

        Vitamin D is constantly in the news lately and for good reason.    Optimal levels of Vitamin D have been linked to a host of benefits including prevention and treatment of many key diseases ranging from Osteoporosis to improved heart health with reduction in heart attack risk to prevention of many different types of cancer.
        The ideal way to get optimal levels of Vitamin D is to let your body create it through Safe Sun Exposure (see previous blog on this subject here:  http://workoutanytime.blogspot.com/2016/08/the-facts-on-safe-sun-exposure-and.html  However this is easier said then done, and too much sun is clearly a strong risk factor for skin cancer!      Enter Vitamin D supplementation.
        The amount and form of Vitamin D supplementation has changed substantially based on lots of emerging research.    The form that should be taken is Vitamin D-3 NOT D-2 form and all experts agree on this!     However when it comes to dosage things get much trickier.      The confusion comes because Vitamin D is really a powerful compound and functions as a hormone in the body.    As such it has profound impact on virtually every system in the body.    In addition you can overdose on Vitamin D supplements so more is NOT always better!
        Ideally you should order a blood test and test your levels.    The test you want is called a 25(OH)D blood test and is offered by all major labs.   You can either ask your doctor to order this test for you OR you can order an in-home test.   You just prick your finger and put a drop of bloo on the enclosed paper and send back in to the labs.    You can also your own blood test online and go to a lab to have blood drawn in the same way your doctor orders the test.   For more information on testing go here:  https://www.vitamindcouncil.org/testkit/?gclid=Cj0KCQjwh_bLBRDeARIsAH4ZYEPhv0MVkO5_S7USZZ8bwVlt5A3vPWGbBFFIbJiB8Wtva0x-IDH7UmQaAlGkEALw_wcB#
        Ideal versus Acceptable Blood Levels of Vitamin D

        There is a big difference between what is considered “acceptable” or okay and ideal blood levels.   Here are the classifications of different blood levels of Vitamin D. according to the Vitamin D Council:
        0 – 30 ng/ML is very low and considered a deficiency
        30 – 39 ng/ML is better but still insufficient for optimal health and disease prevention.
        40 – 100 ng/ML is optimal
        Above 150 ng/ML is toxic!
        The key is to test and if low take a supplement then retest 2 – 3 months after regular vitamin d use because each person is different in how much supplementation they need based on many factors including sun exposure and skin type.     The RDA for Vitamin D for infants is 400iu.    For Children 1 – 13 and adults through age 70 the RDA is 600iu and for those over 70 the RDA is 800iu.
        Unfortunately, this is way too low to get many people into the sufficient much less optimal range so testing is really worthwhile.   In many cases people need 4,000 – 10,000 or more iu’s per day for at least a month to get where they need to be for optimal health!
        Preventing Vitamin D Toxicity through the Co-Administration of Vitamin K-2

        Like many vitamins Vitamin D has a co-factor or other vitamin that helps it perform its function better and in a more balanced fashion, and that other vitamin is Vitamin K-2 (not to be confused with K-1 found in many plants).    In an ideal world, you can get all the Vitamin K-1 you need from eating plenty of green, leafy vegetables, and your body can turn it into K-2.   Unfortunately, this conversion is lacking in many people.
        More importantly K-2 is not easily toxic and can be taken with Vitamin D.    K-2 is best taken as a supplement as MK-7 version which has been heavily researched and shown to improve bone health and prevent arterial calcification which can potentially occur with too much Vitamin D.     For a more complete understanding behind how K-2 works with Vitamin D and why it is a great idea to take the MK-7 form of K-2 with Vitamin D check out this article from Dr. Mercola:   http://articles.mercola.com/sites/articles/archive/2011/03/26/the-delicate-dance-between-vitamins-d-and-k.aspx

        Taking 100 – 200 mcg per day of Vitamin K-2 will help optimize the effects of Vitamin D and minimize risks associated with Vitamin D Supplementation.

        12 Days of Fitness with WORKOUT ANYTIME

        12 Days of Fitness with WORKOUT ANYTIME

        Are you in need of a little inspiration to hit the gym this holiday season? Here’s a great workout routine to give a try this holiday season provided by the experts at WORKOUT ANYTIME. Enjoy! 

        Week 1

        4 days of exercise

        2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 
        2 days of body weight or weight training for 12 min per day
        Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

        Squats
        Push-ups 
        Walking Lunges
        Jumping Jacks
        Burpees
        Ab half roll backs (seated position, roll half way back, come up and exhale)

        Week 2 

        4 days of exercise

        2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with their moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

        2 days of body weight or weight training for 12 min per day
        Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

        Pop Squats
        Push-ups w/alt knee
        Forward Lunges with bicep curl
        Plank Jacks
        Mountain Climbers
        Ab full roll up (lying position, roll all the way up, and exhale)

        Week 3

        4 days of exercise

        2 days of INTERVAL Walking/Jogging – 20 min of cardio exercise at moderate pace, first 10 min walk or do cardio at a moderate pace. The second 10 min will have five 30 second bursts of high intensity mixed with moderate intensity (on min 10,12,14,16, and 18). This boosts metabolic rate. 

        2 days of body weight or weight training for 12 min per day
        Complete two rounds of the following each consisting of 40 seconds of work followed by 20 seconds of rest:

        Squat swing with overhead tricep press
        Spider-Man Push-ups 
        Reverse Lunge with bicep curl
        High Knees
        Shoulder push-ups
        Navy Seals (Ab exercise)

        July Currently & Goals & a Meet Up!

        Oh, July! You seemed so far away a month ago. How could you possibly be almost here already?! Can’t we add another month in between June and July? I really, REALLY want to hold on to June as long as possible. I’m really not ready to return to work in a few weeks…

        Currently July

        I’m linking up with Farley at Oh Boy! 4th Grade for the July Currently.

        Listening: My little girl is almost 2, and she LOVES books. She also loves Pete the Cat. I took her to my favorite children’s book store, Little Shop of Stories, to get the new Pete the Cat book the day it came out. Given that she knows and loves the song “Wheels on the Bus,” it’s a great book for her to “read” on her own.

        Loving: Planbook.com. I signed up for the one-month trial to tinker around with it, and it’s fantastic. I’ll definitely be using it next year.

        Thinking: that I’m much more prepared to teach the Common Core this year — especially with math. I’m excited about implementing all of the things that I worked on this summer to get ready for math, and I’m optimistic about my year ahead.

        Wanting: a longer summer break. There are so many things that I still want to do before going back to school, and I don’t think I’m going to be able to get them all done.

        Needing: a maid. I can’t keep up with my husband, toddler, and two dogs. Once I go back to work, it may be time to hire someone to come in each week.

        Tips, Tricks & Hints: One thing that helps me with time management is to try to group all of my like-projects together and work on them at once. For example, I have one day a week at school that I do all of my copying (or at least I did before going paperless!). I also spend one day working on plans for each subject (e.g., a day for math planning, a day for science, etc.) and a day for working on blog posts, etc for the week. This helps me use my time more efficiently and stay relatively organized.

        July Goals

        I’m also linking up with Jess at I {Heart} Recess for the first time for the monthly goals post.

        Personal: I want to start exercising at least 3 times a week (baby steps). I return to work in a couple weeks (!), and I know with all that I’ll be juggling this year between work and my doctorate that I will need to do better with exercise for balance and stress management.

        Family: I want to squeeze in a couple more “date days” before going back to school. My daughter is in school year round, so on “date days,” my husband leaves his office before lunch, and then we go out to lunch and catch a movie before picking her up. It saves us babysitting costs, and it’s a fun way to spend our afternoon.

        Health: A few years ago when I lost a lot of weight, the biggest change I made was that I consistently drank 64 oz of water every day. Now that I’ve gained back the weight (and then some), I need to start drinking at least that much water every day.

        School: I report to our staff retreat on July 17th, and then pre-planning officially starts on July 25th. I need to figure out how I’m going to decorate my room before then and map out some plans for the first few weeks before then.

        Blog/TpT: I’m hoping to wrap up my Paperless Challenge series in the next few weeks, and I have several new TpT products in the works. This summer has just gone by too quickly for me to finish it all!

        Outside the Box: I want to find some easy and tasty breakfast and lunch recipes that I can use throughout the year. I do a fairly good job cooking healthy dinners, but I am not consistent the rest of the day. I often forget to eat breakfast, and then I don’t make the best choices for lunch either. The more I plan ahead, the better prepared I’ll be. And this justifies spending more time on Pinterest. Win-win!

        Southeastern Bloggers Meet Up!

        Have you heard about the Southeastern-area blogger meet up? It’s about time that those of us in Georgia and the surrounding areas get together, and I’m super thankful that Stacia, Amanda, and Jivey from Collaboration Cuties and Ideas by Jivey have  organized something for us. If you are close to Atlanta, I hope you’ll join us for the meet up on July 20th. It promises to be lots of fun.

        Click on any of the images below to connect with Jivey’s blog where you can RSVP.

        I hope to meet lots of other fabulous teacher bloggers there! Click the button below to RSVP.

        Georgia Bloggers Meet-up

        I was thrilled to get the opportunity to meet up with some other Georgia bloggers yesterday thanks to the organizational efforts of Jayne at Smart Kids. You see, even though I’ve been MIA from the blogging world a lot this year, blogging is always on my mind. Really.

        This year has been a whirlwind as I’ve juggled teaching full-time, parenting, and starting my PhD program. Virtually everything I’ve written this year has included a bibliography, and that hasn’t left a lot of energy for my blog. But when I’ve been researching and writing for my academic pursuits, I’ve been learning all about theories of professional learning and how our online encounters fit into that. I must say, there hasn’t been a lot written about teacher professional learning through blogging, and that’s a gap I intend to fill. More people need to know about the amazing teachers supporting each other through social media. They need to know how that process is 10 times better than any other form of professional development and how it empowers teachers to become better at their craft by pursuing their passions and interests.

        So when I say that blogging is always on my mind, I really mean it. It’s been at the heart of every paper I’ve written as I work on my PhD. When I got the chance to go meet some fellow bloggers, I couldn’t say no.

        The meet up was at Georgia School Supply in Macon, GA–about an hour and a half away from where I live. I was excited to go and meet some fellow bloggy friends because it’s always so good to be able to match names and faces and to remember that there are some real live people with amazing ideas that are working in classrooms, too. I’d never met any of the people there, so it was a real treat.

        We talked about our secret lives as bloggers and TpT’ers, shared tips and strategies, made business plans, swapped products, and had an all around great time. I love meeting other bloggers and learning how much we have in common. Everyone I met yesterday was wonderful, and I look forward to keeping in touch with these new friends!

        I hope to be blogging more this week as my student teacher takes over EVERYTHING from now through spring break (woot! woot!). In the meantime, be sure to check out the blogs from the amazing people I met yesterday!

        Jayne, Kelly, Angie, Stacy, Tara, Valerie

        PhotobucketThe Teacher Wife

        Funky Fresh Firsties

        ...And They All Fall Down...

        Georgia Grown Kiddo's

        Jennifer, Carol, Kathy, Meghan, Kim, Irma, Megan


         
         

        Michelin, Jessica, Greg, Erin, Alison

         

        My Next Assignments…………

        Never have I experienced a hectic period leading up to an assignment like the past few days. I returned from my assignment in Vietnam on the 3rd of February. I was supposed to leave for Indonesia on the 8th for another assignment. However the client was not able to process my visa on time and the assignment was cancelled / postponed. During this period I had to finish 6 Organizational Capacity Assessment Reports. So I was running around trying to process my visa as well as trying to complete the reports before I left for Indonesia.

        Once it was clear that I was unable to go to Indonesia I was requested by 3 more clients to submit proposals. One assignment was in Bangladesh and it went very fast; I have already set the travel dates, booked the tickets, got my visa and everything is a go. The other in India went very quick even though I had to finish contracting, setting the travel dates, booking the ticket, and getting my visa to be able to start the assignment in India on the 21st.

        The other is indeed a nightmare! I have been discussing with this client since October of 2009. Well believe it; some times a contract can take even longer. I have already done 5 versions of the proposal; and the last. This kind of procrastination by a client signifies all or some of the following:

        • The client is not clear about what they want
        • They are haggling about rates and costs
        • The client is unsure about you and the organization you represent
        • Does not know / have the resources / decision making power to use the results of the assignment

        I must say that this client does not know me and the organization. That is why I went through the process of doing 5 versions of the proposal. However now I know it is to do with the rates and costs. This has a critical issue that most consultants do not see; which is the client is likely to not be satisfied with your work no matter how well you do your assignment. This also has the possibility to creating a problem when collecting final payment for the assignment.

        My advice (which is what I am doing right now) is to stop doing anymore changes to the proposal and wait for the client to come back to you with a contract with any changes that they feel are important. This way you push the client towards closing (sales cycle) and stop you from spending time (which is money) on an order which may not be profitable.

        Paperless Mission #8: Conduct and Archive Running Records (iPad)

        This is the eighth installment in my Go Paperless! Challenge series. You can see the other entries in the series here. Also be sure to link up with my Paperless Challenge Linky!

        Mission #8: Conduct and Archive Running Records 

        At least once each six-week term, teachers at my school are supposed to conduct a running record as a guided reading level assessment. We use the Fiction Level Reading Assessments provided by the Teacher’s College Reading and Writing Project, and before my move to paperless, this system was a mess for me. I’d have one binder that was all the student copies of texts, and then I’d have a huge paper pile of blank assessments that I could fill in as I worked with students. Invariably, I’d have a ton of kids reading on level S, for example, and I’d run out of my copies of that assessment, so it was back to the copier to make more. Then I’d have to deal with recording the data and filing them all, and it was a bit of a nightmare.

        Paperless rocks. The nightmare is over.

        In this tutorial, I’ll share how I’m using Dropbox, GoodReader, and Evernote to conduct running records anytime and anywhere on my iPad. You might want to get a good iPad stylus, too, if you like that “pen in hand” feel.

        Step 1. Download all of the running records to a folder on Dropbox.

        You will also want to print one student copy of each assessment. I still keep all of those in page protectors in a binder so I can hand one over for the student to read off of, but I never make copies of these. It’s a one-time paper expense that I’m happy to live with.

        Step 2. Import the guided reading assessments into your GoodReader app.

        Once you’re done saving them to Dropbox, open up GoodReader and connect to DropBox. There’s more information about this in the previous GoodReader tutorial, Mission #6.

        Step 3. Choose the appropriate level, and open up the teacher copy in GoodReader.

        The first time that you want to annotate the document, you’ll be prompted to “Create an Annotated Copy” or “Save to This File.” You will want to choose “Create an Annotated Copy” so you don’t lose your blank copy. Otherwise, you’ll have to download these files every time you want to use them, and that’s only marginally better than running to the copy room — trust me.

        Step 4. Use the annotation tools to mark up student reading as you normally would. 

        I won’t lie — the first couple times I did this, it felt a little awkward. You have to remember to save the document if you’re switching between tools or trying to scroll/resize. But it does get better quickly, I promise! The more you use the tools, the more fluid your movements will be. It didn’t take me long to get back to the level of proficiency I had with paper copies, and while my writing is a little messier on the iPad, it definitely gets the job done.

        Step 5. Rename the file using the manage files option on the home screen of GoodReader. 

        To get back to the home screen, tap the center of your screen — away from any annotations — and it should show you the main menu or “My Documents” up at the top left.

        Step 6. Move the renamed running record over to the student’s notebook in Evernote.

        To get there, go into Manage Files again, and then select Open in. . . 

        You’ll be prompted to flatten annotations. Make sure you choose this or your annotations may be lost. 

        Select Evernote, and it will launch your Evernote app. From there, you can move it into the appropriate notebook and type in any notes that you want to remember about the student’s reading.

        Extra Credit: Create a simultaneous audio file in Evernote.

        This is something that I’ve been playing around with lately, and I think the possibilities for this are amazing. Once I have everything set up so that my student has the student copy of the text and I have the right running record file open in GoodReader, I go into Evernote, open a new note, and start an audio recording using the microphone icon. I tell the student to start, and then I use 4 fingers to swipe quickly from right to left across my iPad. This takes me back to GoodReader (or whatever my last open app was) without having to go through my home screen. When the student finishes, I use the 4-finger swipe in the opposite direction to pause the recording.

        In the end, I have an .mp4 audio file of the student reading in addition to my annotations on the running record. This is great because it’s evidence I can use in RTI and parent-teacher conferences, and it also enables me to play back the audio so the student can hear him or herself read — something that rarely happens. We can then talk about patterns I’m noticing and ways to improve reading fluency. It’s a great teaching tool.

        Your assignment: Try doing a few running records on your iPad and leave me a comment about how it’s going. I’d love to hear other ideas or suggestions to fine-tune this process, too. I’ve only been doing it for about 6 weeks, so I know there are things that could be improved. Hopefully this is enough information to get you started, though!

        Thanks for reading!

        WORKOUT ANYTIME in the Idaho Business Review

        WORKOUT ANYTIME in the Idaho Business Review

        WORKOUT ANYTIME was recently featured in an article in the Idaho Business Review titled, “New 24-hour Gym Chain to Expand into Idaho”. The article begins with details about the brand’s plans for expansion into the northwest, including Idaho. The article then provides background on how Rick Hascall (WORKOUT ANYTIME Pacific Northwest Area Developer) and Chris Gately (WORKOUT ANYTIME North Florida Area Developer) met while overseas. Rick and Chris talk about the plan to open a club by the end of the year and then use that as a showcase for other franchise prospects. The article closes with more details about the brand, information on the investment, and how WORKOUT ANYTIME is able to grow in large cities.
        You can also view the full article here.

        WORKOUT ANYTIME in the Daily News

        WORKOUT ANYTIME in the Daily News

        Dale Chaffin of WORKOUT ANYTIME Bowling Green was recently featured in the Daily News. Dale was interviewed for the story and a photographer was assigned to take his photo for a story about the WORKOUT ANYTIME location in Bowling Green where he is the GM and how he has lost 80 pounds since 2012 with help of personal trainer Chris Talley. The story focused on how working at a gym has helped Dale with his fitness goals. 
        View the full article here. 

        The Secret Knowledge of Fourth Graders

        As I was reminded in reading all of the June Currently’s, not everyone is on summer vacation yet. So for those of you who are not yet enjoying time off, I wanted to share a fun creative writing activity that works well for the end of the year.

        One of my favorite books to share with students is The Secret Knowledge of Grown-Ups by David Wisniewski.

        In this highly-entertaining book, Wisniewski takes several “rules” that children often hear — like “eat your vegetables” — and explains the real reason that rule exists. For example, we don’t eat our vegetables because they make us healthy. The real reason we eat them is to stop them from rising up and taking over the world! Or, we don’t brush our hair to help us look neat, we do it to stop the hair from growing back into our heads and crowding out our brains. The book is filled with hilarious examples and colorful illustrations that my students loved.

        I read excerpts from this book over the course of a couple days, and several of my students looked at it in their free-time. We then set out to write our own examples for a class book entitled “The Secret Knowledge of Fourth Graders.”

        Here are some of the “rules” students wrote about:

        • Why you need to read “Just Right Books”
        • Why we use number 2 pencils on tests
        • Why you can only check out 2 books from the library at a time
        • Why we take AR tests
        • Why it’s important not to be tardy
        • Why we return library books on time
        • Why we have homework
        • Why we use pencils instead of pens
        • Why we don’t bend the pages of a book
        • Why we stack chairs at the end of the day
        • Why we take standardized tests

        The creativity in the “real” reasons why we do these things was fantastic. Here’s an example from one of my students:

        We wrote our final drafts on our iPads in Pages using the Visual Report template. That helped tremendously with the formatting.

        I’m planning to share several of these examples with my students next year, and I will definitely do this activity again. My students enjoyed it so much that several of them were talking about making other “spin-off” books such as The Secret Knowledge of Minecraft Players or The Secret Knowledge of Readers. I’m sorry that I didn’t get to see how those turned out as well.

        If you’ve never read The Secret Knowledge of Grown-Ups, I highly recommend it. It’s great for sparking creative writing ideas, and it can provide a fun writing activity in the late stages of the year.

        What are some other school rules you can envision your students writing about? I’d love to hear your ideas in the comments!

        The carb connection

        Carbohydrates are a vital part of the human diet – they are our primary source of energy, and in their natural state they are turned into glucose to provide fuel for all the organs of the body.

        THERE ARE THREE MAIN TYPES OF CARBOHYDRATES:

        1. Simple sugars, or monosaccharides: glucose (blood sugar), and fructose (fruit sugar)

        2. Double sugars, or disaccharides: lactose (milk sugar)

        Diet Start

        3. Complex carbohydrates, or polysaccharides: starches and cellulose (potatoes, rice, grains and dietary fibre).

        The simplest carbohydrate of them all is glucose, which is assimilated immediately by the body. The more complex the carbohydrate’s structure, the longer it takes the body to convert it into energy – so ‘complex’ carbohydrates are the slow burners, because they are higher in more complicated sugars and fibre and thus take longer to break down into energy-giving glucose.

        So why are carbs the bad guys?

        Even though carbohydrates are a vital component of our overall health, there are certain carbs that serve no nutritional purpose whatsoever, and can even cause us harm if consumed too regularly and in large proportions. They are also the main contributors to the escalating obesity problem. So who are these enemies of our health and weight? They are known as refined carbohydrates.

        The problems started the minute we began to process our food and strip out the fibre and nutrients from flour and sugar, to make them look appealingly white. In so doing, we made them nutritionally redundant. Food processing removes magnesium, zinc and chromium from flour and sugar – the three minerals that the body needs to metabolize carbohydrates properly. It also drastically reduces vitamins B1, B2, B3, calcium and iron.

        Junk foods made up of refined flour and sugar, plus nutritionally empty processed fats, colourings, flavourings and preservatives, make up 75 per cent of many people’s diets. These so-called ‘convenience foods’ are ’empty’ calories, which hurtle into the bloodstream, play havoc with insulin and blood- sugar levels and actually deplete the body of essential vitamins and minerals that are needed to perform other important bodily functions. Processed foods have also been stripped of their fibre content, which is essential for controlling insulin production and protecting the body against diseases such as diverticulitis and colon cancer.

        1923 Buick Roadster with a cool spare tire lock and tool kit

        HOW TO DECOR A SMALL BATHROOMS

        SMALL BATHROOMS DESIGN IDEAS

        SMALL BATHROOMS DESIGN

        Small bathrooms are a great challenge to use and decorate. Some bathrooms have the ability to feel bigger, while others may require small renovation projects to improve the square footage. Depending on your particular bathroom, the choices can be easy. Decide what your budget, then follow these design ideas for great little bathroom.

        Vanity area: Your sink and how much space can be avoided, is crucial in the use of your bathroom. Determine your specific needs of their sink. If you are someone who has lots of toiletries, accessories and much need storage? Use a small vanity that has cabinet doors under the counter, and add shelves and drawers inside the cabinet organization. Do not have a lot of storage needs, but want it to look decorative? Consider using a pedestal sink, sink or under a decorative wall shelves. If you do not have room for one or the other, are also wells that fit the corner of two walls. This well has a record of 90 degrees and the heat sink is tucked away between the walls to give maximum space.

        TOILET: Most people enjoy a lot of space around the toilet, although this is not always a realistic option for small bathrooms today. If you can get out of the toilet, come from a smaller size, occupying less space, and give more space around them. If you can not change the toilet, to minimize the elements of the floor, such as ladders, garbage cans, and a laundry hamper in the bathroom. The more space you can see and use, the better it feels.

        Bath / shower: In most small bathrooms or you have a bathtub with shower inside, or you only have a shower. If your budget allows, losing the shower curtain and add a glass door cabinet. Glass will create the illusion of a large bathroom, and when you use the shower, it feels too. Consider using shower curtains or light a lighter color if you install a glass door is not an option. If you have high ceilings, installing shower curtain with a height over the head to extend the feeling of space.

        LIGHT: Dark colors make the room feel smaller and lighter color makes the room feel larger. If you have the luxury of natural light to pour a bath, it feels much larger. Mimic natural feeling of neutral tones and sunny feel warm and inviting. Replace light bulbs and those which emit a warmer light. Incandescent lamps have an important role in how you see yourself in the mirror. I hate you to the bathroom, if you hate how you look in the mirror!

        Even if your bathroom is small, you can still love his potential. Use these design ideas and love your new bathroom.

        SMALL BATHROOMS DESIGN IDEAS

        SMALL BATHROOMS DESIGN

        SMALL BATHROOMS DESIGN IDEAS

        SMALL BATHROOMS DESIGN IDEAS

        TestRun, Quick ‘End Of The World’ Edition Answers: Does SLI Really Make A Difference? and Where Should I Put PhysX for NVIDIA Videocards? (Text-Only Version)


        Update: Added more Tests and Results – Hitman: Absolution Benchmark, Unigine: Valley Benchmark, Left 4 Dead 2 Unscripted Gameplay Test, Tribes: Ascend Gameplay Test and Rollercoaster Tycoon 3: Platinum Gameplay Test


        Recently becoming the proud owner of another NVIDIA card, I swapped out my trusty AMD/ATi Radeon HD 6870 from ASUS that has served me so well and lovingly joined together two GTX 560 Ti videocards in electric matrimony to try out some SLI. I share now my experiences, the results of many tests and answers to questions I have seen in many places online, including one I had myself.

        This is also a ‘Quick’ Edition, a version of the testing and results that are text-only for now, where I may do a full version as time permits in the future, with screen recordings, graphs and other materials that I would like to share and would help people out.

        The Experiment

        For this TestRun, with two NVIDIA videocards, I try answer the question: “Does SLI really make a difference?” and also “Where to put PhysX?”. Sure, the answer of ‘if it makes a difference’ is answered other places online, with pretty graphs and numbers; but I am one of those people that, although accepting, don’t ‘truly believe’ things unless I can test it out myself. This is a human stubbornness I know, but it also helps me explore many things I would not have otherwise experienced and allows me to share those results and experiences with others. “Does it really double performance?” is probably a more specific question of what I’m feeling, as of course it should make a difference, after all I am putting another 384 processing cores towards throwing around colorful shapes on my screen. I want to know if it even ‘doubles’ the awesomeness of games that I play. There are two cards in there now, so what’s the difference in performance?

        Another aspect I plan to explore is regarding PhysX, NVIDIA’s lovechild of bouncing balls and splattering sparks. Does it affect game performance? Which card should run it if I have it on? Is it better to run it on a dedicated card [that only uses it for that] or off of the CPU? These are my own questions as well since finding a second NVIDIA gpu on sale… PhysX is only in a hamfisted-handful of games – and is only going to be found on NVIDIA GPUs, but it is supposed to improve visual/perceived quality in the games that do use it, due to the fancy waving flags, shattering glass and splattering blood [and the like]. I am going to test the options of having it on the first or second SLI card and how PHysX runs off of the CPU, too.

        The Test

        For this TestRun, I used utilities such as FurMark and FluidMark, Unigine’s Heaven Benchmark and a handful of games to benchmark and test with, such as Just Cause 2, Alien Vs. Predator, Lost Planet 2, Battlefield 3, Unreal Tournament 3 and Batman: Arkham City (all but the first two utilize PhysX). I am currently running an AMD 6-Core CPU and two GTX560Ti’s in SLI mode on a GIGABYTE 990FXA chipset mainboard.
        I assume this is still an average-to-above-average system at the time of this writing (perhaps upper midrange but definitely not top-of-the-line) and it would help out anyone with a similar rig in the future as well with examples of some of the performance difference they will see [if they add a second videocard].

        The Data

        Here are my benchmarking test results and average framerates, comparing SLI mode with a single GPU:

        FurMark: Score (2127), Average Framerate (40fps)
        FurMark: Score (3959), Average Framerate (65fps) SLI
        Lost Planet 2 – Benchmark B: Average Framerate (44fps)
        Lost Planet 2 – Benchmark B: Average Framerate (103fps) SLI
        Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (28fps)
        Just Cause 2: Concrete Jungle Benchmark, High Settings, Average Framerate (51fps) SLI
        Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (44fps)
        Alien Vs. Predator: Benchmark Run, 1920×1200, x16 Filtering, Average Framerate (90fps) SLI
        Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (960), Average Framerate (38fps)
        Unigine Heaven Benchmark: 1080p, x4x4 Filtering, Score (1717), Average Framerate (68fps) SLI

        Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1077), Average Framerate (26fps)
        Unigine Valley Benchmark: 1080p, Ultra Settings, 8xMSAA – Score (1741), Average Framerate (42fps) SLI
        Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (32fps)
        Hitman: Absolution Benchmark: 1080p, Ultra Settings, Average Framerate (33fps) SLI
        (Hitman: Absolution does not appear to take advantage of SLI and/or is not Optimized for it, despite double-checking that SLI mode is enabled and trying to utilize NVIDIA’s ‘Custom Game Profile’ for it, as well – the following two games also do not appear to take advantage of SLI mode)

        Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (51fps)
        Tribes: Ascend – 1920×1080, Very High Settings, Average Framerate (53fps) SLI
        Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (17fps)
        Rollercoaster Tycoon 3: Platinum – 1600×900, 8xAA, Reflections and other (19fps) SLI




        Here are some unscripted, raw gameplay framerates, averaged:
        (multiple samples taken of each with FRAPS’ built-in benchmarking utility)

        Alien Vs. Predator: Marine Storyline, Average Framerate (47fps)
        Alien Vs. Predator: Marine Storyline, Average Framerate (89fps) SLI
        Battlefield 3 : Multiplayer with 64 Players, Average Framerate (33fps)
        Battlefield 3 : Multiplayer with 64 Players, Average Framerate (61fps) SLI

        Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (128fps)
        Left 4 Dead 2 – 1920×1080, Very High Settings, 4xMSAA, 4xAF, Extra Film Grain (185fps) SLI

        *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (36fps)
        *Planetside 2 : Multiplayer with many players, BioLab, Average Framerate (37fps) SLI
        [*Game does not appear to be fully optimized currently, article with more detail here:
        http://gametipsandmore.blogspot.ca/2012/11/planetside-2-and-ultra-settings-quality.html)


        Here are the PhysX tests, done with FluidMark:

        FluidMark: Score (5338) single-card mode, PhysX on the card, Average Framerate (87fps)
        FluidMark: Score (5449) SLI, PhysX set to (GPU1), Average Framerate (89fps)
        FluidMark: Score (7512) SLI, PhysX auto-selected (GPU2), Average Framerate (123fps)
        FluidMark: Score (7379) SLI, PhysX set on (GPU2) Dedicated, Average Framerate (121fps)
        FluidMark: Score (1291) SLI, PhysX set on (CPU), Average Framerate (21fps)

        The Conclusion

        So, does putting in a second videocard practically ‘double’ your gaming performance? Dang right it does. Now, I have read that it ‘should’ in many other articles online, but again, I had to test it out for myself. Almost across the board, in every game I threw at it, the performance was almost doubled. Wonderful stuff.

        For those about to spend money on a second GPU for SLI because now they know it ‘will definitely make a difference’, I should mention as a Tip here that the more cards you add in (for 3-way or 4x SLI or Crossfire, for instance) the lower the rate-of-return you actually get on the investment.
        In other words, adding a third card won’t ‘double the performance again‘ and adding a fourth card won’t ‘double that performance yet again’ –  it won’t even give you 300% and 400% performance [for the third and fourth videocards added]. You will actually see diminishing returns as you add more cards.
        Still, if you have enough money for only a second GPU that matches your ‘old’ one, but not enough money to splurge on a new, faster one, clearly SLI/Crossfire is the way to go, it really does make a huge difference.

        The PhysX tests are interesting, as they answer a question that I myself was wondering: does it matter whether you set PhysX on GPU1, GPU2 or the CPU, and should a GPU be dedicated to it?

        It seems to make sense, that although a powerful, complex 6-core processor, my CPU is nowhere near the raw number-crunching [if ‘simpler’] streamlined data-geyser that the 384-core video card is. The difference can be clearly seen in the results. On the CPU, PhysX calculations [alone/isolated] gave a 23fps output of gushing blood on the screen, while even just one videocard running PhysX by itself put out 87fps of crimson data. Adding another card and telling that GPU instead [of utilizing the first card] to ‘calculate the physics if you please’ took the framerate up to over 120fps. Clearly, NVIDIA is showing that the videocards were made to handle the floating leaves, sparks and bouncing balls of PhysX …and ball handle they did.

        What is interesting is the difference that was made, depending on which card you chose to handle PhysX. When the PhysX was set to GPU2 (the card not plugged directly into the monitor in my case), the highest score was achieved. When the PhysX was set to GPU1 (the card plugged directly into the monitor), it scored almost exactly the same as if there was no second card in the system at all. Now, the utility (FluidMark) does test ‘only‘ PhysX and there isn’t much to see on the screen other than some bouncing baubles, but it seems to show that if you put PhysX on the same card that you are using as your display card (that your monitor plugs into), then it might in fact affect performance of that card to display the pretty images on your screen slightly – or at least, to ‘deal with PhysX and show pretty colors on your screen’ at the same time.

        Either way, they are both better than utilizing the CPU, as the pitiful performance when on the CPU (at least for ‘mainly PhysX only’ calculations) is over 500% slower than the performance seen when PhysX calculations are put on the second video card, and still calculated at over 400% slower compared to when PhysX is put on the first video card in an SLI setup. Clearly it is better to have PhysX calculations done on a GPU – and perhaps not put it on the main display card if you can.

        Testing the ramification of this in actual gameplay, I played some Unreal Tournament 3 and Batman: Arkham City, while juggling the PhysX of both games to be calculated on the CPU, GPU2 and GPU1 (the main display card where the monitor is plugged in). Using FRAPS for collecting benchmark data in Average Frames Per Second, I saw no more than a few frames difference between all modes.
        That is, playing with PhysX set to GPU2, PhysX set on GPU1 or putting the PhysX onto the CPU, I saw only a few frames of difference in actual gameplay performance. Mind you, it can be argued that I didn’t see as many sparks, blood, snow or leaves float across my screen at times; but overall, if you are concerned with only “the game performance ramifications” of where to put PhysX, The Answer Is: playing a game, it doesn’t really matter (but the CPU calculates PhysX slower than putting it on any card, as seen in the data).

        Overall, if you can’t afford that fast, newly-released videocard you want, but you can afford to get another GPU of the same type as the one you have now – and your motherboard and powersupply can support it – it’s totally worth it to get a second videocard for SLI/Crossfire performance (and if you’re going the NVIDIA route, it doesn’t really matter where you put PhysX).

        Have fun upgrading and See You In The Games If The World Doesn’t End Soon!

        Raptr – Closing Down This September 30th, The Blog Here Says ‘Goodbye Old Friend’ To The Once-Useful Program


        Just a notification that the ‘Graphic-Configurator, Game-Installer, Gameplay-Recorder and
        Social Media client that tried to tie it all together’ – Raptr – will be no more, as of September 30th, 2017

        A few days ago, I received an email stating that Raptr was ending the program/client which at one time was tied-in with AMD’s Graphic Drivers as “AMD Gaming Evolved”. Now that both NVIDIA and AMD have their own ‘game configuration utilities’ and ‘game recording capabilities’ (via Crimson for AMD and GeForce Experience for NVIDIA), “there is no need for such a separate utility”, as Raptr’s ‘Farewell Letter’ basically states:

        “We are sad to announce that we will be closing Raptr on September 30th, 2017. We want to start by thanking you for your support over the past 10 years.

        The world is different today than when we first launched Raptr. Many companies offer game optimization tools. Having an independent platform to do this is no longer necessary.

        On September 30, we will start the process of shutting off access to your Raptr account and disabling features. If you’d like to export your tracked game play history, you can do so immediately using the instructions below:

        • Go to Raptr.com
        • Sign in to your Raptr account
        • Click to get your gameplay data

        If you have any other questions, please send us feedback.

        We are proud of the service we built and the community who helped grow Raptr.  Thank you, once again, for your support.

        Dennis “Thresh” Fong
        Co-founder and CEO”


        Mr. Fong Qin, known worldwide as “‘Thresh’ Fong” for his 1990’s Quake and Doom tournament career, was also the co-founder of Xfire (which itself was acquired by Viacom in 2006). While the Raptr/Gaming Evolved client was useful, it seemed to have challenges from close to the start [or at least, noticeable in hindsight, from when I first started using it].

        The Press Release – the notification that Raptr was closing down – as it looked on the Raptr website, September 2017
        (Click to see Full Size)

        At one time, Raptr offered Rewards for playing (and letting it track your Hours or Record your Gameplay); ‘Reward Points’ that you could collect, every time you Optimized a Game (let the utility auto-configure your in-game options/settings for you), or viewed/contributed to a game Forum (similar to Steam’s Game Forums [forii?]). You could also earn Raptr Reward Points just by playing a game and having it running (it gave a running total of your Hours Played).

        The Raptr/Gaming Evolved Client, as it looked in 2014, showing the Reward Points collected at one time
        (from the Gaming Evolved/Raptr Press Kit, Click to see Full Size)

        Prizes to spend your Points on were Draws for, or outright purchases of, Full Games and game tie-in material, such as Character Costumes or Vehicles (Mounts). Just before it was taken away, I even saw some Computer Hardware in there (some dated GPUs mind you, but still, it was neat to see some computer parts you could earn ‘with time played’ only). I never did win a Draw for a Retail Game, but I heard from a couple of people who did. There were many, many upset users, who had been saving for years (literally), at the loss of the points system. Some noted at the time that perhaps it was an early bell, tolling for the end of Raptr, even then…

        The Raptr/Gaming Evolved Client, as it looked in 2015, showing Plays.Tv in its ‘built-in’ Beta phase and Graphic Drivers being kept up-to-date [I owned an AMD/ATi GPU at the time], the client still showing Reward Points being tabulated, and the Twitch Broadcast implementation
        (Click to see Full Size)

        There was a Forum interface built-in to the Raptr client (directly-accessible within it) that was similar to Steam’s Game Forums [too similar?], where people could discuss games, talk about upcoming releases, and share Screenshots; but there wasn’t too much going on in them [that I could see, personally]. There were some helpful and contributive posts, but they were always few in number:

        Example of Raptr/Gaming Evolved Game Forums, showing Guild Wars 2, circa 2016
        (Click to see Full Size)

        As ‘the end’ neared, the Forums became overrun slowly by Spammers and non-English posts talking about other websites (not that there’s anything wrong with speaking other languages, I know a bit of a handful of languages myself, but it was an English forum and much of these posts were clearly Spam of one sort or another). People started asking why things weren’t getting ‘cleaned up’, near the end.

        The Raptr/Gaming Evolved Official Raptr Forum, shown in the client, displaying the number of users of the forum
        (Click to see Full Size)

        While many felt it was ‘just like Steam’ or ‘not needed’ even back then, it still boasted over 100 Million registered users at one point (as evidenced by the number of users within the main Raptr discussion group, above) – and it was even ‘targeted by hackers’ in 2015 – infiltrated in an attempt to gain access to the many users’ data and potentially personal information. A notice went out in January of that year, notifying users to change their password, as a result of the recent security breach:

        Raptr Forum Notification, urging users to change their Passwords, after a recent security breach, circa January 2015
        (Click to see Full Size)

        Personally, I feel sorry that I couldn’t spend more time with Raptr/GamingEvolved, as I only discovered it a couple of years ago.. Over the entire time, my own illness prevented me from posting more, sharing Screenshots more, and talking more about Releases and Reviews [as it does here in this blog!]. I feel like it could have been ‘the next Steam with bonus game configuration’ perhaps – but alas, it simply had too many challenges going against it… People started asking for Chat interface (a la Skype) and Voice Chat, but the Voice part never came. People wanted a GVR (Game Video Recorder) and while that arrived, in the form of Plays.tv – first in the app itself and as a stand-alone utility – perhaps it was too late to save Raptr, as both NVIDIA then AMD, came out with their own ‘built-in’ gameplay recording capabilities about the same time. For example, in 2013, NVIDIA’s Shadowplay became part of their Settings Optimization client, GeForce Experience, which allowed high-performance gameplay recording. Eventually, AMD’s ReLive, part of their Crimson GPU Driver update, also allowed high-quality gameplay recording as well. Both of these essentially negated the game recording aspect of Raptr (Plays.tv, which continues onward today as its’ own stand-alone recorder):

        Information Panel about Plays.TV, the gameplay recording utility that was once included with Raptr/Gaming Evolved
        (Click to see Full Size)

        Although many didn’t use Raptr, or even like it, there were those that used the client to at least keep track of their Hours Played, used it a light social-media app, or just enjoyed the semi-automated Graphic Configuration within. As a former user – that wished he used it more – I myself say a sad ‘Goodbye’ to Raptr. So long, old friend, I wish I got to know you better…

        Workout Anytime Featured in Franchise Times

        Workout Anytime was recently featured in the Franchise Timesin an article titled, “Nest Eggs: Done right, a rollover of retirement funds can be smart option”.

        The article is a trend piece on franchisees using their 401(k) to purchase their business. John Heifner, Workout Anytime franchisee, gives great insight into how he went about purchasing his Workout Anytime with the use of his 401(k). He went on to say “Starting our third year, I can start thinking about funding a retirement again instead of keeping my money more fluid for cash flow.”

        Click HERE for the full article or begin reading below:

        Nest Eggs

        Done right, a rollover of retirement funds can be smart option

        By: Jeffrey McKinney
        More franchisees are using their 401(k) retirement funds to finance the purchase of a franchise. Who should consider the move? Experts explain the do’s and don’ts, including warnings about strict IRS rules.

        Jeremy Turner’s decision to pretty much tap out his retirement funds to buy a Lawn Doctor franchise was very clear: He calls it the best option he had after banks would not lend him the money.
        Turner withdrew $70,000 from his 401(k) plan and another $30,000 he and his wife had in savings to start the lawn care business in St. Louis in 2010. Turner says he discovered companies charge around $5,000 to help complete the financing process. “I would not suggest that someone try to do this on their own because of tax and other risks involved,” he says.

        Raw Gameplay (Unedited) – Battlefield Play4Free (32 Players, Saiga-12 Won from The Daily Draw)

        Battlefield Play4Free is a Free-To-Play title, where it doesn’t cost anything to join in, but you can purchase weapons, armor, clothing and other items for Real Money by purchasing Tokens that you can then use in the in-game Store. There is also a nice feature where you can win prizes (weapons, armor, clothing, etc) from a game called The Daily Draw, where you choose a card from a draw of eight and it will generate an item for you.

        The items range from temporary one-day use weapons and clothing, to seven day usage, to permanent items your character (Soldier) can use in the game forever (for example, a scope that can be attached to a gun for that soldier for all time). This is great for those who can’t afford to purchase many in-game items, as it not only offers the possibility of getting some great gear ‘forever’, it also gives a nice preview of a weapon, mod or clothing, so that you can see what it will look like/feel like, if you decide to splurge and purchase it for yourself (supporting the game and developers as well) sometime in the future.

        In this video, I present ‘Raw Gameplay’ (unedited gameplay) of BFP4F after winning a Saiga-12 Shotgun for one day’s usage on my Medic via The Daily Draw. I had joined a 32-player server (running a Rush map) that was nice and full (16 soldiers per side). After getting the kinks out and getting used to the controls again after not playing for a while, I think things picked up as the game went on.. I was soon having fun arming MCOMs and healing and reviving. Near the end, I realized that my Aircraft controls weren’t set/got reset, as my mouse wasn’t ‘inverted’ and I couldn’t fly the helicopter at all, haha.

        Recorded game: Battlefield Play4Free, Online FPS
        Recorded with: Bandicam (Registered Version) @ 864p
        Recording codec: MPEG-1, 70% Quality, 30fps

        This video was also a test of a few things (though not an ‘Official Testing Video’): I was messing around with different settings (resolutions, quality settings) to see how low I could set things before the quality suffered too much. This is of course, something VERY relative and what looks ‘good enough’ to one person, looks ‘like crap on a cracker’ to another person. What I was testing here was, what seemed good enough to upload to YouTube (since it recompresses anyway) and still be enjoyable, while making the recorded file as small as I could via Quality settings (which limits the bitrate somewhat) and resolution size (the larger the resolution, the more bitrate/filesize that would be required).

        As I have stated in earlier articles talking about Quality, Bitrate and Filesize, I still find that going below 60% produces too many compression artifacts (macroblocks and ‘trails’, Gibbs effects and more) for many games, especially if there are large dark areas (which would get compressed more highly and have these compression effects occur in them). This doesn’t happen with all games however; some games are fast-moving and/or do not have many darker/flatter areas and using 50% quality doesn’t look too bad, even with the MJPEG codec. It’s a balancing and testing game, as some games (especially with text) look fine and others look very bad (the compressor will try to allocate more bits around edges like text and compress even more highly then, the flatter/darker areas in a scene). I have done recordings of news streams and other things however, that allow for a very low quality recording setting (down to 20%), but that is mainly because the source itself is of a low quality (many streams are highly compressed and there is not much ‘extra’ compression artifacts produced by recording it in a lower quality/bitrate, especially if you are going to downsize for the final output video).

        For most games, I found I could go down to 70% Quality comfortably – as long as the resolution stayed ‘higher’ [720p or higher]. With lower resolutions, the bitrate/quality reduction means too many ‘casualties’, as 30% of a 1080p recording isn’t that many pixels when you consider the screen size; but one-third of a 480p recording is a huge amount of the already small screen being ‘lost’ to compression. Thus, with some testing (again to what looks “ok to me“) I arrived at a middle ground of 864p, which maintains decent clarity of text and is large enough to discourage overcompression of darker/flatter areas. For keeping recorded files small and downsizing to 720p HD, it looked fine to me in tests – and on some games, doesn’t look that bad even if you wanted to upsize to 1080p HD (clear text was maintained, etc).

        So, enjoy this first installment in an ‘unofficial’ Video Series here at The Game Tips And More Blog: “Raw Gameplay” of Battlefield Play4Free. If you like the game, play it, tell others about it and buy some stuff from the Online Store and support it!

        See You In The Game!

        Any gameplay videos or animations uploaded are only one example of one possible path of game play and is not representative of the gameplay experience of the entirety of the game material as it is non-repeatable in exactness (movements, actions, viewpoints, etc) to a high degree of accuracy (especially in regards to online multiplayer play and interactions) and therefore is not a representation of a large portion of the game content (this includes complete Walkthroughs/Playthroughs, Raw Gameplay Footage and Tutorials). All material and content uploaded attempts to respect copyright and is presented for Educational and Entertainment purposes only, utilized under Fair Use and can be construed as Free Advertising. No copyright infringement is intended and cannot be inferred. Any possible representation approaching any infringement, to those seeking infringement action, requires double notification and will be honoured by permanent removal of the infringing material.

        TestRun, Video Edition: Recording Gameplay – Rollercoaster Tycoon 2 (Video Samples with Brief Tutorial Video)

        This is a more informal TestRun, where I was merely testing out the perceived quality of some recording codecs while attempting to get gameplay recording of Rollercoaster Tycoon 2 going. As most of you know, recording this game is not just a point-and-shoot affair. Heck, most game recording applications won’t even detect the way it is buffering and utilizing video memory, resulting in a black screen, flashing or very laggy output. After trying years ago and abandoning it temporarily, I was recently searching websites with information on trying it again. With no luck finding a starting point of information, I decided to figure it out on my own – and of course share my findings should anything turn out fruitful…

        First, simply trying to record RCT2 with FRAPS and then Bandicam, turned up nothing as a result. Either it would not detect the screen (it is not using 2D/3D rendering/buffering on the videocard in a standard manner) or it would capture blackness (when trying Bandicam’s ‘Record The Screen’, for instance). Since these are two well-made recording products, I assumed other products would result in the same …result. I also seem to remember trying applications like Camtasia, back in the day..

        So next, I tried good’ol ‘Virtualbox’. A staple Virtual Machine emulator (think of a little computer-running-inside-a-computer), I installed an old version of WindowsXP that I had into the GuestVM. Installing my DRM-free purchase of RCT2 from Good Old Games, I tried recording the screen. No luck, since it wasn’t using Direct3D in a way that I could record (after I finally got Direct3D working in it). I tried playing it in a Windowed VM and recording that. It wouldn’t even run for some reason. It kept trying to ‘take over’ the VM and resizing it. I tried setting my Host Computer desktop resolution to 1280×720 and getting the game to detect that and run it at that resolution, ‘Full Screen’ and ‘Seamless’. Nope. For one thing, the game kept detecting and making available only the most basic of 4:3 aspect resolutions (CRT monitor type sizes), no matter what driver/settings I used for the virtual machine (I of course wanted the more modern widescreen 16:9 ratio, as YouTube uses).

        Third, I tried VMware’s ‘VMware Player’. A free virtual machine app, where the business version (VMware Workstation) is the go-to prog for business virtualization. Installing my XP and then RCT2 into the VM, I got it going in 720p rez and prepared Bandicam to record a “Rectangle On A Screen”. It worked wonderfully. So, with the odd stutter (very few and far between), I can now record RCT2 gameplay and wanted to share my findings of the ability with everyone.

        I was also messing around with different recording codecs, to see what they looked like at different settings with this game at 720p. I quickly threw together this little video showing some settings and results (Sample Video). A summary of what I have set up to record Rollercoaster Tycoon 2 gameplay is just below a short analysis of the video/recordings. Again. this isn’t a ‘full/technical’ TestRun, it is just me sharing some tests I did and showing that one can indeed record RCT2. Further down, there is a video that goes over the steps in summary, then in slightly more detail, showing the steps taken on the screen, a short ‘tutorial’ I suppose. For those who haven’t figured it out or got it working yet, perhaps this information will help you out, too. Enjoy!

        RCT2 testing (codecs/settings) with Bandicam (Samples)

        Recorded with: Bandicam, various quality settings, various codecs @ 1280×720 (720p HD)

        Recorded game: Rollercoaster Tycoon 2 (RCT2)

        Some recording data (per codec) for this test:

        MJPEG @ q80 = 45,000kbps data rate (~330MB per minute of gameplay recording)

        MPEG-1 @ q80 = 11,000kbps data rate (~80MB per minute of gameplay recording)

        MJPEG @ q60 = 34,000kbps data rate (~250MB per minute of gameplay recording)

        MPEG-1 @ q60 = 3,000kbps data rate (~22MB per minute of gameplay recording)

        *XviD and x264 are omitted as results for this test as editing/recompression resulted in corrupted video output (they will be included in a future TestRun with many codecs)

        Brief analysis of sample video:

        • All of the MPEG-1 settings are quite watchable, unless of course the temporal gibbs effects bothers you (the little ‘ghosty/glimmer’ effects that follow around the peeps). Perhaps if I didn’t mention it, you might not have noticed? As with all recording/editing, if it ‘looks fine to you’, then you can run with it if you want. Some people “need” the best quality possible, some can watch any quality and enjoy it. If the MPEG-1 setting at 80% Quality seemed fine to you, go ahead and use that (it is about 1/4 the size of the MJPEG recordings and I have found that editing MPEG-1 is bit slower but quite possible to do in editing applications such as Sony’s Vegas line of products).
        • The MJPEG at a Quality of 50 percent is watchable but messy looking, as expected since a JPG (MJPEG is a series of JPG frames) at only 50% quality would have tons of compression artifacts. 60% is just as bad, with ‘rough blocks’ everywhere (macroblock artifacting). MJPEG at Quality80 isn’t bad and very watchable, but it is much larger in bitrate usage/file size than say, MPEG-1 at the same quality setting (it is about four times larger in file size). It is the easiest codec to edit, however.
        • XviD, an MPEG-4 codec, can potientially looks a lot ‘cleaner’ as it can handle smaller macroblocks/divisions of the screen (inherent in the improvements in MPEG-4 over MPEG-1) – but the output seems to have strong corruption (it leaves ‘trails’ on the screen) when attempting to edit/recompress it into a final product (as seen in the video).
        • x264, a more recent ‘Advanced Video Codec’ version of MPEG-4, it records in wonderful quality and low file sizes – but all of that is hidden behind, again, corruption (‘trails’ left behind on the screen*) and slow editing.
          (The editing can be helped somewhat by specifying a smaller GroupOfPictures (frames inbetween keyframes/information frames, to help seeking through the video.)
          Keep in mind that for the MPEG-4 codecs, the corruption surfaces only when editing/recompressing the source video. The ‘original’ gameplay recording in MPEG-4 is quite clean and watchable, completely fine if you are just going to ‘record-and-upload’ to a video sharing site or personal website.
          *More on this issue and x264 recording in a future article
        • A full Codec Comparison TestRun is coming, where I test out a bunch of different codecs and see how they fare for general game recording, MPEG-1, MPEG-4, AVC/h264 (MPEG-4 Part-10), MJPEG, XviD, RGB24 and more…

          Some related articles:
          Game recording comparison with various codecs and settings (Minecraft)
          http://gametipsandmore.blogspot.ca/2012/10/testrun-video-edition-fraps-vs-dxtory.html
          The ghosting/blurring effect when rendering in Sony Vegas products
          http://gametipsandmore.blogspot.ca/2012/10/and-more-how-to-stop-ghosting-or.html

        There are a couple other ways to do it I think, but here is how I recorded Rollercoaster Tycoon 2 gameplay with Bandicam:

        • Install Windows into a VM Guest (for example, a VMware virtual machine within the VMware Player application)
        • Install RCT2 into that Virtual Machine, running the VM in a window (for example, 1280×720)
        • Set up Bandicam to record a ‘Rectangle On A Screen’ and set the Rectangle to be the same size as the Virtual Machine running in a window (in this case, 1280×720) and line them up. 

        That’s it!

        Tutorial Video on how to record Rollercoaster Tycoon 2 with Bandicam

        I had seen many people on many forums asking for years how to record RCT2 gamplay. I have seen a few videos online now and so some have it working, but if you haven’t been able to get it going or would like to try to make your own Rollercoaster Tycoon 2 videos, here’s how. Good luck with it and have fun!
        See you in the games!

        The carbohydrate jewels

        By upping your intake of low GI fruit and vegetables, you will not only be on your way to becoming leaner, but you will have a profound effect on your health. The amazing phytonutrients (plant nutrients) that you find in brightly coloured raw organic fruit and vegetables are clever little substances that can protect you from ill health in various ways, although many people’s diets are sadly lacking in them.

        Phytonutrients can help regulate the immune system, stabilize vitamins in body tissues and protect from serious illnesses, such as such as cancer. They do this by working as antioxidants alongside vitamins A, C, E and D, and the minerals, selenium and zinc. As a team, these powerful compounds have the ability to slow down the damaging oxidative process caused by those ‘enemies of a healthy state’, the free radicals. Antioxidants can also rid the body of these free radicals, which are the natural waste products of metabolism, which, if left unchecked, can lead to degenerative disease, by causing imbalances on a cellular level.

        Diet Start

        Take note that these free radicals are also found in overheated oils and fried foods, another good reason to kiss junk food good bye.

        They aren’t classed as essential nutrients, but without phytonutrients your sense of wellness would be severely compromised.

        They work in the body at deep physiological and biochemical levels, and luckily enough are to be found in low-density/low GI fruit and vegetables. Eating these raw wherever possible is the key to maximizing their life- enhancing qualities. Cooking destroys many of the benefits that you will reap if you include a colourful array of energy-boosting raw fruit and vegetables in your daily diet.

        Life is a balancing act

        So now you have a better understanding of the impact that the wrong carbohydrates can have on your body, and have established that you need to incorporate more of the colourful and low GI fibrous fruit and vegetables in your diet. But man cannot live by carbohydrates alone. You will have to take a close look at the two other macronutrients that work hand-in-hand with carbohydrates to provide energy and nourish the body: protein and fats.

        The key to balancing blood-sugar levels, banishing insulin resistance and losing excess weight lies in successfully balancing these three macronutrients.

        MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

        Hülsta German Furniture Maker showed some really incredible ideas of life that may be adopted by the style-conscious people who want to give their house a futuristic look and ergonomic. The perfect blend of stylish design with bright pink and black give the whole to create a very refreshing, but a look of the space age. The leather was added to an authentic touch and royal with a minimalist effect adding to the “cool factor”. You can either go all black look metallic or deliberately throwing red and white, while maintaining the class and elegance.

        LIVING ROOM LAYOUTZ FROM HÜLSTA

        LIVING ROOM LAYOUTZ FROM HÜLSTA

        MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

        MODERN LIVING ROOM LAYOUTZ FROM HÜLSTA

        LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

        LIVING ROOM STYLE LAYOUTZ FROM HÜLSTA

        LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

        LIVING ROOM LAYOUTs DESIGN FROM HÜLSTA

        10 TIPS TO DECORATE KIDS BATHROOMS

        Teach young children the fundamentals of responsibility bathroom can be a challenge. From potty training to control the way you brush your teeth, bathroom children should be a place of inspiration and pleasure for them to learn and grow. Child bathroom decoration can borrow design elements of your room. With color, the creative organization, and areas designed exclusively for little hands and creative minds, here are 10 tips to decorate their bathrooms. Depending on the age of your children, follow these tips to design your age in mind. For young children, bright primary colors are inspiring, and for older children feel more mature palette of neutrals and pastels.

        KID’S BATHROOM DESIGN

        KID’S BATHROOM DESIGN

        1) Create a colorful background: Although most of the plumbing fixtures remain in neutral shades of white, bone or brown, it is essential to their subject is colorful and fun. Consider painting the vanity, wall, wallpaper, stenciling and playful lyrics on the walls. Be careful when you use the stickers that moisture in the bathroom can lead them to ignore good.

        2) Keep the walls with clean surfaces sustainable: When decorating a child’s bathroom, especially around wet areas such as toilets, sink and bathtub, make sure the surfaces are easy to clean and durable. ceramic wall tile, wall painting wainscoting panels are washable and ideal.

        3) Provide adequate lighting. This advice applies to any bathroom! You do not have dark areas in the bathroom. In terms of cleaning and a bit to see what they do. Bathrooms for children are a priority area of ​​injury, as wall lighting, overhead ambient lighting, ceiling lights and even in the vanity are clear and are not shadows.

        4) the organization is the key to learning, children’s room when decorating a child to remember to put the bathroom easy to find areas of the organization, and easy to reach new heights. Vanity sank in open shelves under the bath toy suction cup holders and bins hygiene products to help children to keep the bathroom clean and tidy.

        5) Small furniture a little ‘small: Believe it or not is a fitting suitable for babies and small children. There are different estimates for lower mobile is a good lesson for children how to use the toilet. Regardless of the customer, when planning your baby’s bath, to know the options are there for the growing child.

        6) to accessorize on a budget: You can spend a fortune to decorate the bathroom of your children also understand that a simple color palette of coordinated accessories that are affordable, can give an overly great! From color-coordinated towels, rugs, shower curtains and hygiene products, operators can combine colors and patterns and decorations.

        DECORATING KID’S BATHROOM

        DECORATING KID’S BATHROOM

        7) The theme of the election: if you are at a loss how to decorate your bathroom kids, consider to choose a theme they have. Derived from animals, sports and entertainment activities to spend time with their favorite cartoon characters and favorite color, the options are endless. If a child is old enough to ask them their opinion on how they would like to decorate your bathroom.

        8) Bathroom safety: Make sure the bathrooms have the proper procedures instilled in interior design. Even though a beautiful crystal vanity knobs cabinetry might be nice to see, if not secured properly can be dangerous for children. Make sure all the furniture, harmful chemicals, and decorative elements are not easy for children.

        9) Update bathrooms of a teenager: For older children and adolescents want to want to accessorize and color coordinated decor may not be as strong. Instead, opt for temporary accessory that can change depending on your mood teenager! colored towels, rugs can coordinate a work of art hanging on the wall all have their own bathroom needs to make your teen feel comfortable in their space.

        10) Keep it simple: It ‘s easy to wrap decorate any room in your home. Remember to have fun when decorating your bathroom children, and to seek inspiration from blogs, interior design magazines and shops to visit in local dishes. Many stores offer “instant bathroom furniture for you. combinations of color coordinated accessories, you can mix and match. No thought required!

        Bring together elements to your bathroom decor kids can be fun and easy to use these 10 tips. Consider your child’s age when decorating, as well as a way of life. If you are a busy parent who does not have time to clean the bathroom with lots of toys to keep open the basket and quick cleaning areas. Remember that you are teaching and inspiring children to enjoy swimming and creative learning.

        LUXURY DECORATING KID’S BATHROOM

        LUXURY DECORATING KID’S BATHROOM

        CONCEPT KIDS ROOM PAINT COLORS DESIGN

        KIDS BATHROOM PAINT COLORS

        Looking for ideas for decorating Kids Room Paint Colors? Enter a space about the longevity of choosing background elements that are long lasting. Then use the equipment, bedding, area rugs and cheap to create themes easily hangeable. Unlike other rooms of the house, which mainly reflects your personality, decor rooms children requires slightly different approach. If you are a first time parent or a veteran, decorating baby rooms are not childs play.

        This is a very complex process in which an adult is to incorporate all the safety features and mix with a childhood fantasy. The room is a device identification of the child, not yours. But the change of the children, then you need to think ahead: the design is easy to change a child of five years or two? There is room for storage, research, animal or doll collections, or a wrestling match?

        First, consult with the child. Be sure to consider the child likes or dislikes when decorating their space. Decorating the kids room paint colors is a work in progress – planning begins before birth and continues throughout childhood. You can be as creative and on top of your child you are dynamic and playful colors work well in a child’s room. Always paint childrens rooms with a semi-gloss, if the walls are easy to dry without being too bright.

        Regarding storage, check your local do-it-your-own for a wide range of affordable solutions. As children grow, learn, play and explore their environment should respond. Children will love the exciting makeover, because they focus on their preferred interests in all age groups. As your child grows, ask for their input for kids room paint colors.

        KIDS ROOM PAINT COLORS
        KIDS BEDROOM PAINT COLORS

        Multi-Protocol Label Switching (MPLS)

        Today the division between routers and switches is a fine line. Whereas switches were initially designed to help segment a LAN into multiple collision domains, and thereby allow you to extend the reach of a particular LAN topology, switches have moved higher up the networking ladder. When switching is used in a LAN to connect individual client and server computers, the process is known as microsegmentation, because the collision domain has been reduced to just the switch and the computer attached to a port. Switches at this level generally work using the hardware (MAC) addresses of the attached computers.

        Layer 3 switching moves switching up the ladder by one rung by switching network frames based on the OSI Network layer address—an IP address, for example. But wait, that’s what a router does, isn’t it? Of course. A layer 3 switch is basically a router, but it implements most of its functions in application-specific integrated chips (ASICS) and performs its packet processing much faster than does a traditional router, which uses a microprocessor (much like a computer CPU) for this function.

        Internet 2010

        When you get to the top of the ladder, where large volumes of data need to be routed through a large corporate network—or the Internet, for that matter—even the fastest traditional routers or layer 3 switches easily can become bogged down by the volume of traffic. Because of this, the core of a large network traditionally has been built using ATM or Frame Relay switches, and IP traffic is sent over these switched networks.

        To speed up the processing of routing packets at high-volume rates, a newer technology has been developing over the past few years and goes by the name of Multi-Protocol Label Switching (MPLS). MPLS is covered in the next section.

        Combining Routing and Switching

        Traditional routers have a large amount of overhead processing they must perform to get a packet to its destination. Each router along the packet’s path must open up and examine the layer 3 header information before it can decide on which port to output the packet to send it to its next hop on its journey. If a packet passes through more than just a few routers, that’s a lot of processing time. Remember that IP is a connectionless protocol. Decisions must be made about a packet’s travel plans at each stage of its journey through the network. The solution to this problem lies in newer technology—high-speed switching. Specifically, Multi-Protocol Label Switching, which is discussed in the next section, combines the best of routing techniques with switching techniques.

        When you look at concepts such as ATM or Frame Relay, which are connection-oriented protocols, this isn’t the case. Instead, virtual circuits (either permanent or switched) are set up to connect to endpoints of a communication path so that all cells (as in the case of ATM) or frames (as in the case of Frame Relay) usually take the same path through the switched network.

        It’s Not Just You™: AMD’s Crimson Drivers, Radeon ReLive Not Working At First [Possible Fix]

        Just a quick post before I go to bed here, that I wanted to share about the AMD Crimson Drivers that I got notified about just a bit ago, which included AMD’s “ReLive”, their new Game [and Desktop] Recording utility – ‘built-in’ to their 16.12 Drivers… For those who couldn’t get it working right away (I see posts about it already in the Official AMD Forums), I couldn’t either… And although I eventually did, I wanted to let others know, if you are having issues with it: It’s Not Just You™

        I was already starting to get tired when I saw a notification of the Driver Update – and I had no idea there was a nifty Game Recording ‘app’ incoming with it [I haven’t been reading much lately, I have another Cold for pete’s sake!]. For AMD GPU owners, waiting patiently to see if AMD was going to come out with their own Game Recording utility – it’s here! The future is now!

        Check out AMD’s Video on their ReLive edition of Radeon here: 
        https://www.youtube.com/watch?v=nRSm12lwRe4

        [I really wanted to start Testing it all out tonight, running Benchmarks and collecting Data for a TestRun or a Quality Test with it; but my sleepyness is actually building and getting the better of me, so I better go soon – I wanted to share what I did this evening though, to get it working (for me), before I go…]


        Without going over the few things I tried first that didn’t work (setting configuration, testing with different games, etc), here’s the steps to take that finally got it running, for me:

        • Download the Latest AMD Drivers via their main Website (http://support.amd.com/)
        • Uninstall the main AMD Drivers via the Control Panel > Programs > Uninstall/Change Program
        • Reboot
        • Install AMD Drivers via the Download from their Website
        • Reboot

        That’s it!

        After that, even though I have a 200 Series* AMD GPU at the time of this writing**, I was able to get ReLive up and running, even playing a little bit with the configuration and making a couple of short test recordings, before I came here to write this quick ‘tip’ of what might help get it going for others… It’s a larger ‘step’ (messing with Drivers, as opposed to just messing with Configuration/Settings); but I always like to Troubleshoot from the smallest steps first (eg. changing some settings) to larger steps (eg. re-installing software) to huge steps (eg. OS reinstallation, hardware changes). Thankfully, it started working just fine after only a bit of a ‘larger step’ taken.


        Although with the most recent versions of Windows you don’t always have to Reboot it when making changes, it helps to get everything ‘in order’ in the background, re-initializing all hardware and Drivers fully – which is why many installers/software still get you to do it through their installation programs.

        I plan on putting the Game Recorder through it’s paces, working on a TestRun and a QualityTest, to come in the future here at The Blog – for now though, hopefully ReLive can get up and working for you, too – good luck, and if you are having troubles with it, remember – It’s Not Just You™!

        * The AMD page on ReLive at their main website (http://www.amd.com/en-us/innovations/software-technologies/radeon-software/gaming/radeon-relive) shows only 400 Series GPUs as ‘Officially Compatible’. Although it does not state ‘it will not work with earlier Series’, it is unknown 100% at this time if it is possible, hence my mentioning it above

        ** Disclaimer and Personal Veracity Statement: Although I currently own an AMD GPU, I have owned NVIDIA GPUs in the past and will do so in the future. I have no personal preference between the two, purchasing one or the other as Upgrades depending on my needs at the time and my financial limitations at the time I choose to Upgrade. I have not and will not receive any compensation for mentioning or talking about either companies’ products. I am merely an enthusiastic user (of both).

        INTERIOR DESIGN IN BANKE HOTEL

        BANKE HOTEL

        BANKE HOTEL ROOM DESIGNBANKE HOTEL ROOM DESIGN

        BANKE HOTEL DESIGNBANKE HOTEL DESIGN

        The Banke Hotel is recently installed in the Opera district in Paris-a first for the prestigious hotel chain Derby Hotels Collection. As its name hints at the Banke Hotel is the story of a metamorphosis. That of the body of a conventional bank Haussmann in a luxurious hotel of 94 rooms – which harmoniously blend the baroque style and design

        Tempura Mazel

        Tempura is a Japanese dish. Tidbits are dipped in a batter of flour, water, and egg yolk, sizzled to golden in hot fat (by all means, use your wok for this if you have one), drained, and artistically arranged and served, usually on a doily-lined flat basket. The consistency of the batter (which must be neither too thick nor too thin) and the temperature of the oil (350° is just right) are of the utmost importance. Tempura cannot wait; it must go directly from wok to table.

        Diet Start

        • 5 asparagus, cut into 2 or 3
          long diagonal pieces
        • 1-2 large carrots, sliced 1/4″ thick on diagonal
        • 10 green beans, ends trimmed
        • 2 small zucchini, cut into thick sticks
        • 1 bell pepper, cut into strips, pith and seeds removed
        • 6 shitake mushrooms, soaked in warm water
        • 6 large parsley sprigs, stems removed, dried
        • 4 Nori seaweed, cut into quarters (available in Japanese markets)

        Clean and cut vegetables; make certain they are dry.

        Batter:

        • Ice water
        • 21/4 cups flour
        • 3 egg yolks
        • 11/2 quarts safflower oil (more if using sauté pan)

        Gradually add ice water to flour with a whisk till mixture is the consistency of heavy cream. Beat yolks and whisk into mixture.

        Heat oil to 350° in wok or large sauté pan. Dip vegetables into batter and fry till golden (1-2 minutes). Do not crowd pan. Drain.

        Chilis Mazel

        • 6 fresh green chilis
        • 1 recipe Mazel Cheese Mexican, warmed
        • Ice water
        • 3/4 cup flour
        • 1 egg yolk
        • Safflower oil to deep fry (about 11/2 qts.)
        • 1 recipe of cooked Salsa Mazel

        Slit chilis lengthwise, just long enough to stuff with Mazel Cheese Mexican. Clean out seeds, etc. Stuff with Mazel Cheese mixture and set aside.

        Gently whisk enough ice water into flour to make it about the consistency of heavy cream. Beat yolk with a fork, then whisk into batter.

        Heat oil to 350°. Dip each chili into batter. Cook in oil till golden (1-2 minutes)

        Drain on paper towels.

        Served cooked salsa over chilis.

        YIELD: 2 servings.

        The timing on deep frying is difficult to pinpoint. Variables include size of pan, the amount of oil used, temperature of oil, desired color of finished product, etc. Do not crowd pan.

        WORKOUT ANYTIME on Entrepreneur.com

        Bill Aicklen, owner of four WORKOUT ANYTIME locations in Georgia, was recently featured in Franchise Players, Entrepreneur.com’s Q&A interview column! Bill discusses his background as a franchisee, challenges he’s faced and why he chose WORKOUT ANYTIME as the business model to get behind. Read the full interview here!

        Globesity continue…

        WHY WERE PALAEOLITHIC PEOPLE SO HEALTHY?

        • They had an active lifestyle
        • Their protein intake was far higher in polyunsaturated fats, because their animals were smaller and wild
        • Their consumption of fibre was far higher than ours, at around 100g (31/2oz) per day
        • The plants and berries they were eating were providing them with around 300 times more immune- boosting and antioxidant phytonutrients (plant nutrients) and vitamin C than the average diet offers today.

        Warning signs from the present day

        Diet Start

        • 300,000 American deaths per year are due to obesity-related non- communicable diseases. This accounts for 12 per cent of the entire US healthcare expenditure, costing the country $100 billion (270 billion) per year. The cost of a cheeseburger may be coming down, but its cost to the nation’s health most certainly is not.

        In 2002 the Centre for Disease Control and Prevention (CDC) in Atlanta estimated that 17 million Americans, including 151,000 under the age of 20, now have diabetes. Type 2 (or adult-onset) diabetes is a disorder resulting from the body’s inability to make enough insulin (a hormone that regulates glucose metabolism in the body) – and it can be life-threatening. The risks of heart disease and stroke increase two- to fourfold and the death rate doubles in diabetics. The disease is also the leading cause of blindness, kidney failure and amputations.

        • In 2002 the National Audit Office in the UK revealed the following facts:

        58 per cent of adults in the UK are technically overweight, and 20 per cent are clinically obese.

        In 1998 around 30,000 people in England alone died prematurely as a direct consequence of being overweight.

        In the same year obesity was responsible for 1.8 million lost working days, costing the National Health Service and the economy of the country an estimated 22.5 billion ($3.6 billion).

        The number of people who are obese in England has tripled over the last 20 years, and if this trend continues, one in four people will be obese by the year 2010.

        • North American Inuits, whose native diet traditionally consists of whale meat, berries and moss, had no history of heart disease, diabetes or dental decay – until they introduced white flour and sugar into their diets.

        Fads Pose Dangers, Don’t Listen to Dietary Fads

        However, we need to be careful on this question of diet. Many different ideas are prevalent today. Don’t believe all you hear. There may be some elements of truth in a few of these dietary fads, but usually there is some foolish notion hidden underneath that is neither in harmony with science nor with common sense. Don’t be misled.

        Regardless of the many fantastic claims that you may hear, there is no one perfect food. There is none that will meet all the needs of the body any more than there is one perfect material that will serve every purpose in building a house. The best diets are those in which there is plenty of variety. Then if any particular element is lacking in one food, it may be amply provided in another. This is one excellent way of avoiding deficiencies in your diet.

        Variety is most important. But it is not the complete answer. We must also use discretion in the choice of foods. Some things that may look tasty are not always healthful and nutritious. Foods that are highly refined are less likely to contain the vital elements to meet the needs of the body. Modern food processing may have its good points. But sometimes the vitamins and minerals are lost in the refining process. It is better to use fresh foods whenever they are available. But be sure that they are really fresh.

        Diet Start

        Some people tend to think that malnutrition is a problem among the less-favored classes of the world. While this is true, it is surprising how often those with higher incomes also suffer from a different type of malnutrition. They eat plenty of food, but mostly of the wrong type. This so-called “hidden hunger” is very common in large cities, where more artificial living conditions prevail. Modern methods of marketing are providing a wider range of foods. But far too many people still prefer to live on devitalized foods that are woefully inadequate. It is these devitalized foods that lead to hidden hunger.

        Such diets fail to provide the body with the right building materials that will keep it functioning properly. Foods that contain a high concentration of sugar and other carbohydrates may provide e